Engineering Papers⌕ Search

Engineering topics

Williams, M. D.

Publications and source records attributed to Williams, M. D..

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1987

Preliminary conceptual design and weight of a one-megawatt space-based laser power station utilizing a solar-pumped iodine lasant

A preliminary conceptual design of a space-based solar-pumped iodide laser emitting 1 MW of laser power for space-to-space power transmission is described. A near-parabolic solar collector focuses sunlight onto the t-C4F9I lasant within a transverse-flow optical cavity. Using waste heat, a thermal system supplies compressor and auxiliary power. The major system components are designed with weight estimates assigned. In particular, it is found that laser efficiency is not a dominant weight factor, the dominant factor being the laser transmission optics. The station mass is 92,000 kg, requiring approximately eight Shuttle flights to LEO, where an orbital transfer vehicle can transport it to the final altitude of 6378 km.

De Young, R. J.↗
NASA NTRS1986

Solar-pumped photodissociation iodine laser

The scientific feasibility of a solar-pumped iodine photodissociation laser for space applications is under investigation. Recently, a 2-W CW output for more than one hour was achieved using n-C3F7I vapor as the laser material and a vortex-stabilized argon arc as the light source.

Lee, J. H.↗
NASA NTRS1985

Solar-pumped solid state Nd lasers

Solid state neodymium lasers are considered candidates for space-based polar-pumped laser for continuous power transmission. Laser performance for three different slab laser configurations has been computed to show the excellent power capability of such systems if heat problems can be solved. Ideas involving geometries and materials are offered as potential solutions to the heat problem.

Williams, M. D.↗
NASA NTRS1984

Intensity and absorbed-power distribution in a cylindrical solar-pumped dye laser

The internal intensity and absorbed-power distribution of a simplified hypothetical dye laser of cylindrical geometry is calculated. Total absorbed power is also calculated and compared with laboratory measurements of lasing-threshold energy deposition in a dye cell to determine the suitability of solar radiation as a pump source or, alternatively, what modifications, if any, are necessary to the hypothetical system for solar pumping.

Williams, M. D.↗
NASA NTRS1982

Laser reflection from oxide-coated aluminum

The theory of reflection from an oxide-coated metal is combined with experimentally measured parameters of aluminum to produce useful amplitude and phase shift information applicable to the concentration and direction of laser light. Amplitude and phase are plotted vs angle of incidence for several important laser wavelengths in the near UV, visible, and IR spectral regions.

Williams, M. D.↗
NASA NTRS1980

Fission-fragment nuclear lasing of Ar/He/-Xe

Nuclear-pumped lasing of Ar-Xe and He-Xe has been demonstrated using (U-235)F6 fission-fragment excitation. Fission fragments were created by absorption of thermal neutrons in a combination of gaseous (U-235)F6 and laser-tube wall coatings formed from UF6 chemical reaction products. At a pressure of 600 torr Ar-(3%)Xe, lasing occurred at 2.65 microns in Xe. Up to 3 torr of gaseous (U-235)F6 was added to 600 torr Ar-Xe before serious laser quenching occurred. With 3 torr of (U-235)F6 added, 38% of the energy deposition came from gaseous UF6 and the remainder from the uranium wall coating. The neutron flux at lasing threshold was found to be 4 x 10 to the 15th n/sq cm sec.

De Young, R. J.↗
NASA NTRS1979

Volume-pumped nuclear lasers

A summary is given to experimental results on volume-pumped nuclear lasers obtained at the Langley Research Center. The first volume-pumped nuclear laser was achieved in 1976 using the He-3(n, p)H-3 reaction. Since that time laser output has increased by more than a factor of 1000 (from mW to W). Lasing has been demonstrated in He-3-Ar (1.27 and 1.79 micron), He-3-Xe (2.027, 3.5, and 3.65 microns), He-3-Kr (2.19 and 2.52 microns), and He-3-Cl (1.587 micron). Pressures of the lasing mixture range from 300 torr to 4 atm with a peak power output of 26 W were achieved in a He-3-Ar mixture with a multiple-pass laser configuration.

Hohl, F.↗
NASA NTRS1978

Volumetric direct nuclear pumped laser

A volumetric direct nuclear pumped laser was developed in which the gas is a mixture of He-3 and a minority gas from the group of argon, krypton, xenon, chlorine and fluorine. The mixture of He-3 and the minority gas produces lasing with a minority gas concentration of from 0.01 to 10 percent argon, 1 percent krypton, 0.01 to 5 percent xenon and small concentrations of chlorine or fluorine.

Jalufka, N. W.↗
NASA NTRS1977

Nuclear-pumped gas lasers

Laser pumping incorporates use of volumetric helium isotope reaction. Reaction deposits energy nearly uniformly throughout laser volume. Method improves efficiency of system as compared with conventional coating method.

Aohl, F.↗
NASA NTRS1976

Uranium plasma emission at gas-core reaction conditions

The results of uranium plasma emission produced by two methods are reported. For the first method a ruby laser was focused on the surface of a pure U-238 sample to create a plasma plume with a peak plasma density of about 10 to the 20th power/cu cm and a temperature of about 38,600 K. The absolute intensity of the emitted radiation, covering the range from 300 to 7000 A was measured. For the second method, the uranium plasma was produced in a 20 kilovolt, 25 kilojoule plasma-focus device. The 2.5 MeV neutrons from the D-D reaction in the plasma focus are moderated by polyethylene and induce fissions in the U-235. Spectra of both uranium plasmas were obtained over the range from 30 to 9000 A. Because of the low fission yield the energy input due to fissions is very small compared to the total energy in the plasma.

Williams, M. D.↗
NASA NTRS1973

Uranium plasma radiates in the UV spectrum

Description of an experiment designed to produce and spectroscopically analyze a simulated gas core reactor plasma in the spectral range from 300 to 1300 A. The plasma was produced by focusing the radiation of a Q-spoiled ruby laser onto the flat surface of a pure U-238 specimen.

Williams, M. D.↗
NASA NTRS1972

Extreme-ultraviolet aluminum spectra emitted from a laser-produced plasma.

Five new aluminum lines in the region from 35 to 50 A have been produced by focusing the radiation of a 460-MW, Q-spoiled ruby laser on an aluminum target. Characteristics of the new lines, including their observed and predicted wavelength, intensity, and transition, are tabulated.

Williams, M. D.↗
NASA NTRS1971

Isoelectronic wavelength calculations for argon spectra /Research note/.

A recent comprehensive set of isoelectronic calculations based on the data of Kelly (1968) has yielded two argon wavelengths that correspond with two of the unidentified wavelengths reported by Connerade et al. (1971) and a third wavelength which supports an uncertain identification. The observed and the interpolated wavelengths are presented in a table together with their identifications, and information concerning the interpolations.

Williams, M. D.↗
NASA NTRS1971

Neutron production mechanism in a plasma focus.

The neutrons emitted by a plasma focus were analyzed by using a time-of-flight method. Flight paths as large as 80 m were used to obtain better than 10% energy resolution. The energy spectrum of neutrons from d-d reactions in the plasma focus shows a sharp onset with average maximum energies of 2.8 and 3.2 MeV in the radial and the axial directions, respectively. The average half-width of the energy spectrum was 270 keV with a shot-to-shot variation between 150 and 400 keV. Simultaneous measurements in the axial and radial directions showed no appreciable difference in the half-widths and thus indicated randomly oriented ion velocities in the plasma. A converging ion model is described which is found to be in agreement with the measured quantities.

Lee, J. H.↗