Engineering Papers⌕ Search

Engineering topics

Williams, A. C.

Publications and source records attributed to Williams, A. C..

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1987

Accretion onto neutron stars with the presence of a double layer

It is known, from laboratory experiments, that double layers will form in plasmas, usually in the presence of an electric current. It is argued that a double layer may be present in the accretion column of a neutron star in a binary system. It is suggested that the double layer may be the predominant deceleration mechanism for the accreting ions, especially for sources with X-ray luminosities of less than about 10 to the 37th erg/s. Previous models have involved either a collisionless shock or an assumed gradual deceleration of the accreting ions to thermalize the energy of the infalling matter.

Williams, A. C.↗
NASA NTRS1987

The formation of a double layer leading to the critical velocity phenomenon

The formation of a double layer is proposed as the mechanism which produces the critical velocity phenomenon. This hypothesis was examined qualitatively and it was found that the double layer can be a very efficient mechanism for transferring the kinetic energy of the neutral gas into the kinetic energy of electrons which, in turn, will ionize the neutral gas if the critical velocity was reached or exceeded.

Williams, A. C.↗
NASA NTRS1987

The formation of a double layer leading to the critical velocity phenomenon

The formation of a double layer is proposed as the mechanism which produces the critical velocity phenomenon. This hypothesis is examined qualitatively, and it is found that the double layer can be a very efficient mechanism for transferring the kinetic energy of the neutral gas into the kinetic energy of electrons which, in turn, will ionize the neutral gas if the critical velocity has been reached or exceeded.

Williams, A. C.↗
NASA NTRS1986

General Bohm and Langmuir conditions for a strong double layer in space plasmas

The appropriate Bohm and Langmuir conditions when there are three beam-type particles passing through the double layer in addition to the usual two species of trapped particles are derived. It is shown that the Langmuir conditions, which normally imply a net current through the double layer, are consistent with zero net current when the class of accreting ions is included. It is also found that the Bohm criterion is quite different from its usual form, and that it has nothing to do with instabilities of the plasma at some critical level, as is believed to be true.

Williams, A. C.↗
NASA NTRS1986

Observations of quasi-periodic oscillations from GX 5 - 1 and Cygnus X-2 with the Einstein (HEAO 2) Observatory

The bright galactic bulge X-ray source GX 5 - 1 was observed in April 1979 with the Monitor Proportional Counter on board the Einstein (HEAO 2) Observatory. Analysis of the high time resolution data from the Time Interval Processor confirms the recent Exosat discovery of quasi-periodic oscillations in the X-ray emission from GX 5 - 1. In addition, the summed 0.4 s power spectrum shows the low-frequency red noise component also discovered in the Exosat data. Low-frequency structure is also clearly present in data taken from the bright galaxtic X-ray source Cyg X-2 in December 1978. The expected power spectrum for quasi-periodic oscillations was calculated, including the low-frequency red noise component, using a simple shot noise model with oscillating shots.

Elsner, R. F.↗
NASA NTRS1986

Accretion onto neutron stars with the presence of a double layer

It is known from laboratory experiments that double layers can form in plasmas, usually in the presence of an electric current. It is argued that a double layer may be present in the accretion column of a neutron star in a binary system. It is suggested that the double layer may be the predominant deceleration mechanism for the accreting ions, especially for sources with X-ray luminosities of less than about 10 to the 37th erg/s. Previous models have involved either a collisionless shock or an assumed gradual deceleration of the accreting ions to thermalize the energy of the infalling matter.

Williams, A. C.↗
NASA NTRS1985

On fast X-ray rotators with long-term periodicities

The support of previous SAS 3 spacecraft observations by new data gathered by the Monitor Proportional Counter aboard the HEAO 2 spacecraft indicates that the pulse period history of the 13.5 sec-pulsing X-ray source LMC X-4 is consistent with standard accretion and torque models only if LMC X-4 is a fast rotator for which the accretion torques nearly cancel. This result leads to a neutron star magnetic field strength estimate of about 1.2 x 10 to the 13th G. Strong evidence is noted for Her X-1's status as a fast rotator, while SMC X-1 is probably an intermediate-to-fast rotator. In the context of slaved disk models for these objects, it is noted that the precession periods expected for the companion stars are significantly longer than the observed 1-2 month time scales; slaved disk models are thereby undermined.

Naranan, S.↗
NASA NTRS1985

Hydrogen-like atoms on the surface of neutron stars - Intense magnetic field effects

It is known that very strong (greater than 1-TG) magnetic fields exist on the surface of some neutron stars. The properties of atoms in fields of this nature are considerably different from those of atoms in field-free regions. Because of the mixing of spherical and cylindrical symmetries, the analytical solution to the problem of a hydrogen atom in a uniform magnetic field is impossible to obtain. In this work, a variational wave function is used to describe the properties of hydrogen like atoms in intense magnetic fields including first-order relativistic effects. Special attention is given to the transition matrix elements for the 2p(0) - 1s(0) transition in Fe XXVI.

Williams, A. C.↗
NASA NTRS1984

Polarization of Comptonized photons

The polarization of Comptonized X-rays as a function of energy and emission angle is obtained. The geometry utilized is that of the semi-infinite plane with the source photons located on a plane at a finite optical depth below the surface. It is further shown what information is obtainable from polarization measurements at only two different energies. The observed values for the X-ray sources Cyg X-1 and Sco X-1 are used to illustrate the calculations.

Williams, A. C.↗
NASA NTRS1984

Experimental results for the scattering of X-rays from smooth surfaces

By utilizing the unique X-ray test facility at NASA's Marshall Space Flight Center, high resolution data have been obtained for the scattering of X-rays from smooth optical flats. Using X-rays with energies in the range from 2.99 keV to 8.06 keV, the resulting reflected images from five state-of-the-art polished mirror flats with various substrate and coating materials are presented and analyzed. Evidence for large angle scattering is shown to exist for some energies and is discussed in terms of theoretical models for surface defects.

Williams, A. C.↗
NASA NTRS1984

Photon escape probabilities in a semi-infinite plane-parallel medium

It is shown in this work how to obtain the probabilities of photons escaping from a cold electron plasma environment after having undergone an arbitrary number of scatterings. This is done by retaining the exact differential cross section for Thomson scattering as opposed to using its polarization and angle averaged form. The results are given in the form of recursion relations. The geometry used is the semi-infinite plane-parallel geometry witlh a photon source located on a plane at an arbitrary optical depth below the surface. Analytical expressions are given for the probabilities which are accurate over a wide range of initial optical depth. These results can be used to model compact X-ray galactic sources which are surrounded by an electron-rich plasma.

Williams, A. C.↗
NASA NTRS1984

The AXAF technology program: The optical flats tests

The results of a technology program aimed at determining the limits of surface polishing for reflecting X-ray telescopes is presented. This program is part of the major task of developing the Advanced X-ray Astrophysical Facility (AXAF). By studying the optical properties of state-of-the-art polished flat surfaces, conclusions were drawn as to the potential capability of AXAF. Surface microtopography of the flats as well as their figure are studied by X-ray, visual, and mechanical techniques. These techniques and their results are described. The employed polishing techniques are more than adequate for the specifications of the AXAF mirrors.

Williams, A. C.↗
NASA NTRS1983

X-ray observations of LMC X-3 with the monitor proportional counter aboard the HEAO 2 Einstein observatory - A comparison with Cygnus X-1

A comparison is presented of the black hole candidates LMC X-3 and Cygnus X-1 based on Einstein observations of LMC X-3 with the monitor proportional counter. A spectral analysis shows LMC X-3 to be more like the typical bright galactic X-ray source than Cygnus X-1. A search for periodic pulsations over a period range from 0.2 ms to over 1000 s set upper limits at the 90 percent confidence level of the order of 10 percent. An analysis of the aperiodic variability of LMC X-3 shows none of the shot noise behavior characteristic of Cygnus X-1. The absence of distinctive X-ray properties common to both sources suggests that the identification of black hole candidates on the basis of X-ray properties similar to Cygnus X-1 (or LMC X-3) is not reliable.

Weisskopf, M. C.↗
NASA NTRS1982

The study of X-ray scattering to determine surface topography of smooth surfaces

The scattering of X-rays from state-of-the-art polished mirrors is discussed with reference to the requirements of the Advanced X-ray Astrophysics Facility telescope. An experimental set-up is described which allows information to be obtained with subarcsecond resolution. A sample of the data obtained is presented along with a possible theoretical model for its interpretation.

Williams, A. C.↗
NASA NTRS1982

Determination of the efficiency of a proportional counter for detecting X-rays

A parallel beam of X-rays (approximately monoenergetic) passing through a rectangular slit and scattering from two flat mirrors comprise the X-ray test. The two mirrors are arranged in a periscope geometry so that the final reflected beam is parallel to the incident beam but displaced laterally by given amount. One of the detectors used to intercept the reflected X-rays is a one dimensional gas-filled proportional counter which is sensitive to the position (in 1 dimension) at which the X-rays are incident within its detecting "window". The total length of the anode wire of the proportional counter is 120 mm and this length can be divided electronically into a maximum of 1,024 parts. Hence, the output of an experimental run would be the number of incident X-rays that registered on each of the 1,024 channels. Each channel would represent an X-ray at a different spatial location and, hence, at a different scattering angle. In order to look at a wider range of scattering angles, the detector is placed on an optical table which can be rotated.

Williams, A. C.↗
NASA NTRS1982

Relations between mirror flats geometry and X-ray data

The X-ray data is used to determine the position where the mirror flats are properly aligned. The zero angle of incidence position of the mirrors is determined with the data. The mirrors are in the periscope geometry. However, the value of S sub T, the distance from the slit to the plane of the short mirror, is not fixed nor known a priori. This parameter plays a very important role in the zero position of the mirrors. As a further complicating factor, it is possible that the mirrors are not parallel. That is, they may be cocked by some angles alpha and beta, respectively. The relation between the X-ray data and the geometry of the mirrors is given. The experimental errors are given in terms of known or measured parameters.

Williams, A. C.↗
NASA NTRS1981

Reduction of the one-dimensional X-ray scattering data on mirror flats at NASA/Marshall Space Flight Center

Data on the scattering of X-rays from various mirror flats obtained from different vendors. The scattering data discussed in this section is obtained by a one dimensional proportional counter at X-ray energies of 8.06, 6.4 and 2.99 keV. X-rays are generated at one end of a 312.4m long tube which is under vacuum. This long tube provides a parallel beam of X-rays which is then collimated by a slit and allowed to scatter from a pair of mirror flats at small grazing angles of incidence. The slit and mirrors assembly is placed 182.4 meters from the other end of the tube where the proportional counter detector is located. The detector is sitting on an optical table which is pivoted so that it can rotate to intercept X-rays at a range of spatial locations. The optical table pivot is located 2.78 meters in front of the detector, and has an operational angular range of 350 arc minutes. Measured from the position of the mirror, this total angular range of the data is (350) (2.78/182.4) = 5.33 arcminutes.

Williams, A. C.↗