Engineering Papers⌕ Search

Engineering topics

William M Chan

Publications and source records attributed to William M Chan.

12 records
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

An Automated Marching Scheme for Overset Structured Surface Mesh Generation

Starting with a Boundary Representation (BRep) of the geometry of an aerospace vehicle, an automated marching scheme is presented for generation of structured overset surface meshes. First, a pre-processing step automatically generates discrete representations of the BRep faces and BRep edges by tessellating in parameter space. Topological connectivity between the discretized BRep edges is then established, followed by automatic grid point distribution on these edges based on local turning angle, proximity to sharp geometric features, and prescribed maximum stretching ratio and grid spacing. A set of initial curves for algebraic or hyperbolic marching on a surface is then derived from the redistributed edge curves. A spatially-variable marching distance together with a grid point distribution in the marching direction are automatically determined for each initial curve. A set of overset surface meshes that covers the entire geometry is then obtained by combining the surface meshes around the BRep edges, and the structured meshes derived from the discretized BRep faces

Shishir A Pandya↗
NASA NTRSDate not supplied

Mesh Effects on Flow Solutions for a 2-D Multi-Element Airfoil Using Structured Overset Methods

Current best-practices for mesh generation in a structured overset framework are evaluated to determine their effects on the accuracy and convergence of the flow solution on a two-dimensional sectional cut of the High-Lift Common Research Model (HLCRM) wing. Mesh parameters are varied independently and correlated with force and moment coefficients from the flow solutions to identify the trends and sensitivities of the parameter variations, and the characteristics of a best practice mesh. Grid convergence and mesh adaption studies are also performed to determine the minimum mesh quality needed in order for solution-based adaption to reach an accurate flow solution.

T^3↗
NASA NTRSDate not supplied

Automation of Overset Structured Mesh Generation onBoundary Representation Geometries

A scheme is presented for the automatic generation of structured overset meshes ongeometries that are defined by Boundary Representation (BRep) solids. The surface meshsystem consists of face, edge and node meshes corresponding to the three respective basicBRep entity types. A cut-cell method is introduced to improve robustness of the on-geometrydetermination test for a face mesh grid point. A geometric component tagging scheme is utilizedto enhance local grid point distribution on a configuration with a large range of geometricscales. A cap grid topology is automatically utilized around the trailing edge of wing and tailtips to enhance mesh quality and to enable more effective surface coverage. Robustness of thehyperbolic surface marching method is improved by replacing the point projection scheme witha walking scheme. Relaxation of surface grid spacing at concave corners enables automatedhigh quality hyperbolic volume mesh creation. Domain connectivity is automatically performedon the surface mesh system. A variety of test cases are presented including a re-entry capsule,two models of the Juncture Flow Experiment wing-body, five rotorcraft concept vehicles, andvarious components of the High-Lift Common Research Model from the High-Lift PredictionWorkshop 4.

TTT↗
NASA NTRSDate not supplied

Computational Aerodynamics Study of the Lift+Cruise VTOL Concept Vehicle Components

This paper describes a building-block approach for high-fidelity computational fluid dynamic simulations of NASA’s Lift+Cruise (L+C) Vertical Take-off and Landing (VTOL) concept vehicle. The Reynolds-Averaged Navier-Stokes (RANS) equations are solved on overset structured grids using OVERFLOW. For these analyses, overset meshes are generated using recently developed automated meshing tools. A baseline study is initially performed on the vehicle fuselage with wings and tails. Vehicle components such as pylons and gears are then added individually and together to study incremental component aerodynamic effects. The results from this study are also used to demonstrate the capabilities of the automatic meshing tools for performing rapid computational analyses.

RVLT↗
NASA NTRSDate not supplied

Advances in Automation of Overset Structured Volume Mesh Generation and Domain Connectivity

Automation of overset structured surface mesh generation has recently been accomplished by the creation of face, edge, and node meshes based on Boundary Representation solids as the geometry input. The current work continues the automation effort in overset volume mesh generation and domain connectivity based on the auto-generated surface meshes. All near-body curvilinear volume meshes are automatically generated using hyperbolic methods. Automation of this step is enabled by appropriate surface grid point distribution, and selection of boundary-splay and smoothing parameters based on concave and convex surface features. The off-body domain is covered by two automatically generated grid systems. The first contains a single Cartesian mesh with a uniform core enclosing all near-body volume meshes and stretched layers that extend to the far field, while the second consists of a set of small stretched Cartesian grids covering pockets of off-body orphan points. With high quality mesh overlap mostly guaranteed by the surface meshing scheme, orphan points that need to be covered by the second Cartesian mesh system are located away from the fine grid spacing region near the wall. Using line-segment and ray-pierce tests against the surface grids, hole-cutting is accomplished on both near and off-body volume grids resulting in appropriate clearances from the wall. The complete mesh generation automation process is demonstrated on five test cases where flow solutions are also computed and compared with solutions obtained using other methods.

TTT↗