Engineering Papers⌕ Search

Engineering topics

Wielicki, B. A.

Publications and source records attributed to Wielicki, B. A..

28 records · Page 2

Inversion methods for satellite studies of the Earth Radiation Budget - Development of algorithms for the ERBE mission

The Earth Radiation Budget Experiment carries a three-channel scanning radiometer and a set of nadir-looking wide and medium field-of-view instruments for measuring the radiation emitted from earth and the solar radiation reflected from earth. This paper describes the algorithms which are used to compute the radiant exitances at a reference level ('top of the atmosphere') from these measurements. Methods used to analyze data from previous radiation budget experiments are reviewed, and the rationale for the present algorithms is developed. The scanner data are converted to radiances by use of spectral factors, which account for imperfect spectral response of the optics. These radiances are converted to radiant exitances at the reference level by use of directional models, which account for anisotropy of the radiation as it leaves the earth. The spectral factors and directional models are selected on the basis of the scene, which is identified on the basis of the location and the long-wave and shortwave radiances. These individual results are averaged over 2.5 x 2.5 deg regions. Data from the wide and medium field-of-view instruments are analyzed by use of the traditional shape factor method and also by use of a numerical filter, which permits resolution enhancement along the orbit track.

Smith, G. L.↗

Cumulus cloud properties derived using Landsat satellite data

Landsat Multispectral Scanner (MSS) digital data are used to remotely sense cumulus cloud properties such as cloud fraction and cloud reflectance, along with the distribution of cloud number and cloud fraction as a function of cloud size. The analysis is carried out for four cumulus fields covering regions approximately 150 km square. Results for these initial cloud fields indicate that: (1) the common intuitive model of clouds as nearly uniform reflecting surfaces is a poor representation of cumulus clouds, (2) the cumulus clouds were often multicelled, even for clouds as small as 1 km in diameter, (3) cloud fractional coverage derived using a simple reflectance threshold is sensitive to the chosen threshold even for 57-meter resolution Landsat data, (4) the sensitivity of cloud fraction to changes in satellite sensor resolution is less sensitive than suggested theoretically, and (5) the Landsat derived cloud size distributions show encouraging similarities among the cloud fields examined.

Wielicki, B. A.↗

The stratocumulus nature of fog

Landsat MSS and TM digital data on fog cell size distribution, cell aspect ratio, and cell orientation angle were analyzed for three high inversion radiation fogs in central California and on advection fog in eastern South Dakota. The results indicate that (1) fogs, being composed of individual cellular structures, are stratocumulus in nature; (2) the reflectance properties vary strongly across the cells, suggesting considerable variation in liquid water content; and (3) many fogs are patchy, often revealing surface features between the fog cells. The ratio of the wavelength between the fog cells and the height of the boundary layer was found to be between 2 and 3, and the typical horizontal aspect ratio of fog cells was about a factor of two. The observed quasi-periodic oscillations of measured fog variables may be caused by advection of the cellular structures across the observational site.

Welch, R. M.↗

The effect of spatial resolution on satellite derived cloud cover

The effects of a varying sensor spatial resolution on the cloud fraction derived by reflectance threshold (RT), IR temperature threshold (IRT), hybrid bispectral threshold (HBT) and spatial coherence (SC) methods for cloud retrieval from remotely sensed data were examined experimentally. Eight subscenes from four scenes acquired with the Landsat Thematic Mapper (TM) in 1982, 1983 and 1985 were used in the trials. All cloud retrieval methods were applied to extract the cloud fraction in all the subscences for comparison with the total cloud amount determined from the TM band 4 data, which had 28.5 m resolution.

Wielicki, B. A.↗

ERBE data inversion

Instruments on board the (presently two) satellites of the Earth Radiation Budget Experiment (ERBE) are collecting data for determining monthly averaged radiation exitances at the top of the atmosphere (TOA). To achieve the accuracy desired of the mission, radiances at the satellite are first calculated, with allowance made of sensor optical properties and the directionality of the TOA radiation field. The subsatellite surface type is classified to adjust for albedo changes and correction values are added for the types of cloud cover detected.

Smith, G. L.↗

A radiative parameterization of stratocumulus cloud fields

A parameterization scheme is presented which allows the calculation of radiative reflected fluxes from a stratocumulus cloud field. The scheme is based upon plane-parallel calculations, such as delta-Eddington, and a simple procedure is outlined by which the plane-parallel fluxes may be transformed to those of the broken cloud case. This parameterization scheme has been tested for optical thicknesses ranging from tau = 3 to 49, solar zenith angles ranging from theta sub 0 = 0 to 72.5 deg, and all values of cloud cover. Plane-parallel calculations become increasingly more accurate as optical depth decreases. This suggests that calculations including broken cloudiness effects such as shadowing are probably unnecessary in thin cirrus or aerosol layers over water.

Welch, R. M.↗

Stratocumulus cloud field reflected fluxes - The effect of cloud shape

The reflected fluxes of stratocumulus cloud fields are calculated as a function of sky cover aspect ratio and cloud shape. In order to obtain a better fit with general circulation models (GCMs), cloud liquid water volume values were kept invariant relative to cloud shape. On the basis of the required accuracy of the Earth Radiation Budget Experiment (ERBE), an order of magnitude value of 10 W per sq m was used to estimate the difference between plane-parallel and broken cloudiness reflected fluxes. An empirical relationship for effective cloud cover at a solar zenith angle of 60 deg is derived. The relationship allows for the accurate computation of broken cloud field reflected fluxes using plane-parallel calculations. It is predicted that more accurate estimates of broken cloud field radiative properties may be possible in the future.

Welch, R. M.↗

Method for estimating errors for radiation budget based on a scanning radiometer

The conduction of the Earth Radiation Budget Experiment (ERBE) will involve the utilization of three sets of instruments. Each set consists of a nonscanning package and a scanning radiometer. The instruments will fly on the NOAA F and G operational satellites and on a dedicated spacecraft, the Earth Radiation Budget Satellite (ERBS). The ERBS will be in a 57 deg inclination orbit and will precess around the earth to provide sampling of the diurnal cycle of regions between + or - 57 deg latitude. The primary function of the scanning radiometer is to provide measurements for the calculation of the earth-emitted and absorbed solar radiation at the top of the earth-atmosphere system, averaged over 250 x 250 km regions. The present paper is concerned with errors found in these regional averages. Attention is given to details regarding the problem, scene identification probabilities, scene identification error effects, total pixel error, and errors due to regional averaging.

Smith, G. L.↗

Cloud fraction and cloud size distributions derived using Landsat Multispectral Scanner data

Initial results are presented on the spatial structure of cumulus cloud fields derived using Landsat digital data. Techniques to determine clear, overcast, and cloud edge pixels are discussed and used to analyze four Landsat scenes. Cloud number densities, cloud cover, cloud aspect ratio, and the ratio of interior to cloud edge pixels are obtained for the four scenes and are discussed. This new application of Landsat digital data should prove useful in developing and testing models of the radiative and dynamical properties of cumulus cloud fields on GCM spatial scales.

Wielicki, B. A.↗

Cloud retrieval using infrared sounder data - Error analysis

An error analysis is presented for cloud-top pressure and cloud-amount retrieval using infrared sounder data. Rms and bias errors are determined for instrument noise (typical of the HIRS-2 instrument on Tiros-N) and for uncertainties in the temperature profiles and water vapor profiles used to estimate clear-sky radiances. Errors are determined for a range of test cloud amounts (0.1-1.0) and cloud-top pressures (920-100 mb). Rms errors vary by an order of magnitude depending on the cloud height and cloud amount within the satellite's field of view. Large bias errors are found for low-altitude clouds. These bias errors are shown to result from physical constraints placed on retrieved cloud properties, i.e., cloud amounts between 0.0 and 1.0 and cloud-top pressures between the ground and tropopause levels. Middle-level and high-level clouds (above 3-4 km) are retrieved with low bias and rms errors.

Wielicki, B. A.↗