Engineering Papers⌕ Search

Engineering topics

Whitaker, Ann F.

Publications and source records attributed to Whitaker, Ann F..

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRS2001

The ATIC Experiment : Performance of the Scintillator Hodoscope and the BGO Calorimeter

The Advanced Thin Ionization Calorimeter (ATIC) Balloon Experiment had its first flight from McMurdo, Antarctica, 28/12/00 to 13/01/01, recording over 360 hours of data. The design goal for ATIC was to measure the Cosmic Ray composition and energy spectra from approximately 50 GeV to near 100 TeV utilizing a Si-matrix detector, a scintillator hodoscope, carbon targets and a calorimeter consisting of a stack of BGO scintillator crystals. The design, operation, and in-flight performance of the scintillator hodoscope and the BGO calorimeter are described.

Isbert, J.↗
NASA NTRS2001

Plasma Beta Above a Solar Active Region: Rethinking the Paradigm

In this paper, we present a model of the plasma beta above an active region and discuss its consequences in terms of coronal magnetic field modeling. The beta-plasma model is representative and derived from a collection of sources. The resulting beta variation with height is used to emphasize the assumption that the magnetic pressure dominates over the plasma pressure must be carefully considered depending on what part of the solar atmosphere is being considered. This paper points out (1) that the paradigm that the coronal magnetic field can be constructed from a force-free magnetic field must be used in the correct context, since the forcefree region is sandwiched between two regions which have beta greater than 1, (2) that the chromospheric MgIICIV magnetic measurements occur near the beta-minimum, and (3) that, moving from the photosphere upwards, beta can return to 1 at relatively low coronal heights, e.g. R approximately 1.2R(sub)s.

Gary, G. Allen↗
NASA NTRS2001

The First Flight of ATIC : Preliminary Results on CNO Nuclei

We present preliminary results on the spectra of CNO nuclei in the cosmic radiation as measured in the first flight of the Advanced Thin Ionization Calorimeter Balloon Experiment (ATIC) which lasted for 16 days, starting in December, 2000 with a launch from McMurdo, Antarctica. ATIC is a multiple, long duration balloon flight,investigation for the study of cosmic ray spectra from below 50 GeV to near 100 TeV total energy, using a fully active Bismuth Germanate (BGO) calorimeter. It is equipped with the first large area mosaic of small fully depleted silicon detector pads capable of charge identification in cosmic rays from H to Fe. As a redundancy check for the charge identification and a coarse particle tracking system, three projective layers of x-y scintillator hodoscopes were employed, above, in the center and below a Carbon interaction'target'.

Fazely, A.↗
NASA NTRS2001

High Energy Electron and Gamma - Ray Detection with ATIC

The Advanced Thin Ionization Calorimeter (ATIC) balloon borne ionization calorimeter is well suited to record and identify high energy cosmic ray electrons, and at very high energies gamma-ray photons as well. We have simulated the performance of the instrument, and compare the simulations with actual high energy electron exposures at the CERN accelerator. Simulations and measurements do not compare exactly, in detail, but overall the simulations have predicted actual measured behavior quite well. ATIC has had its first 16 day balloon flight at the turn of the year over Antarctica, and first results obtained using the analysis methods derived from simulations and calibrations will be reported.

Chang, J.↗
NASA NTRS2001

ATIC Flight Data Processing

The first flight of the Advanced Thin Ionization Calorimeter (ATIC) experiment from McMurdo, Antarctica lasted for 16 days, starting in December, 2000. The ATIC instrument consists of a fully active 320-crystal, 960-channel Bismuth Germanate (BGO) calorimeter, 202 scintillator strips in 3 hodoscopes interleaved with a graphite target, and a 4480-pixel silicon matrix charge detector. We have developed an Object Oriented data processing package based on ROOT. In this paper, we will describe the data processing scheme used in handling the accumulated 45 GB of flight data. We will also discuss trigger issues by comparing the measured energy-dependent trigger efficiency with its simulation and calibration issues by considering the time-dependence of housekeeping information, etc.

Ahn, H. S.↗
NASA NTRS2001

Preliminary Results from the First Flight of ATIC: The Silicon Matrix

The Advanced Thin Ionization Calorimeter (ATIC) uses a silicon matrix detector to determine charge in conjunction with a scintillator hodoscope that measures charge and trajectory. Cosmic rays that interact in a carbon target have their energy determined from the shower that develops within a fully active calorimeter composed of a stack of scintillating BGO crystals. The silicon matrix consists of 4480 individual silicon pads, each capable of measuring the signal from cosmic rays with atomic numbers from 1 to 26. Preliminary results will be presented describing the performance of the silicon matrix during the 16-day maiden flight of ATIC around Antarctica.

Adams, J. H., Jr.↗
NASA NTRS2001

Preliminary Results from the First Flight of ATIC: Z>8 Spectra

The Advanced Thin Ionization Calorimeter (ATIC) is designed to measure individual spectra from protons to Fe for energies from 10 GeV to near 100 Tev. Preliminary results will be presented 8 less than Z less than or equal to 26 spectra from the maiden flight of ATIC in Antarctica that acquired 360 hours of data.

Adams, J. H.↗
NASA NTRS2001

The BATSE Experiment on the Compton Observatory

The Burst and Transient Source Experiment (BATSE) on the Compton Gamma-Ray Observatory operated in space from April 1991 until the mission was terminated in June 2000. While the most notable observations were those of gamma-ray bursts, many other astrophysical and even geophysical observations were performed by the eight large, but relatively simple, uncollimated detectors of BATSE. An overview of the instrumentation, some highlights of observations and their interpretation will be presented.

Fishman, Gerald J.↗
NASA NTRS2001

A New Analytical Approach to Predict Spacing Selection in Lamellar and Rod Eutectic Systems

In this paper, we reexamine the Jackson and Hunt (JH) theory and relax the assumption of isothermal solid/liquid interface(SLI) used in their treatment. A modification of the term B. in the expression of the solute concentration profile is also proposed. Based on the predictions of this modified theory the traditional definitions of regular and irregular eutectics are discussed. For regular eutectics the new model identifies a range of spacing within the limits defined by the minimum undercooling of the alpha and beta phase. For the irregular Al-Si eutectic system in particular we identified two different spacing selection mechanisnis: a) for a particular growth rate, a nearly isothermal interface can be achieved at a unique minimum spacing lambda(sub I); b) the average spacing in the microstructure (lambda(sub av) > lambda(sub I)) is essentially dictated by the undercooling of the faceted phase. Based on the modified theoretical model a semi-empirical expression has been developed to account for the influence of the temperature gradient. The theoretical calculations have been found to be in good agreement with the published experimental measurements.

Catalina, Adrian V.↗
NASA NTRS2001

Crystallization of bFGF-DNA Aptamer Complexes Using a Sparse Matrix Designed for Protein-Nucleic Acid Complexes

The Sparse Matrix approach for obtaining lead crystallization conditions has proven to be very fruitful for the crystallization of proteins and nucleic acids. Here we report a Sparse Matrix developed specifically for the crystallization of protein-DNA complexes. This method is rapid and economical, typically requiring 2.5 mg of complex to test 48 conditions. The method was originally developed to crystallize basic fibroblast growth factor (bFGF) complexed with DNA sequences identified through in vitro selection, or SELEX, methods. Two DNA aptamers that bind with approximately nanomolar affinity and inhibit the angiogenic properties of bFGF were selected for co-crystallization. The Sparse Matrix produced lead crystallization conditions for both bFGF-DNA complexes.

Cannone, Jaime J.↗
NASA NTRS2001

Jupiter: The Solar System's Giant

At more than 10 times the size of the Earth, Jupiter is the largest planet in the solar system. Although not quite large enough to be a sun, it still has its own system of moons and rings. It's huge magnetic field and fast rotation make Jupiter both the most interesting planet and the most dangerous. From the sulfur volcanoes of Io to the frozen water ice ocean of Europa, Jupiter "rocks". Come experience what NASA has learned about the giant planet

Gallagher, Dennis L.↗
NASA NTRS2001

Computer Simulation of the Forces Acting on the Polystyrene Probe Submerged into the Succinonitrile Near Phase Transition

Modeling approach to simulate both mesoscale and microscopic forces acting in a typical AFM experiment is presented. At mesoscale level interaction between the cantilever tip and the sample surface is primarily described by the balance of attractive Van der Waals and repulsive forces. The model of cantilever oscillations is applicable to both non-contact and "tapping" AFM. This model can be farther enhanced to describe nanoparticle manipulation by cantilever. At microscopic level tip contamination and details of tip-surface interaction can be simulated using molecular dynamics approach. Integration of mesoscale model with molecular dynamic model is discussed.

Bune, Andris V.↗
NASA NTRS2001

Gamma-Ray Bursts: An Update

Gamma-ray bursts are now known to originate from cosmological distances and represent the largest known explosions in the Universe. The observed characteristics of bursts in the gamma-ray region, primarily from data obtained with the BATSE experiment on the Compton Observatory, will be described. These include the temporal and spectral characteristic of bursts, and their intensity and sky distribution. A summary of recent discoveries and observations in other wavelength regions will also be presented, along with their implications for models of the burst emission mechanism. Various models for the energy source of gamma-ray bursts will be described.

Fishman, Gerald J.↗
NASA NTRS2001

Growth Orientation of Carbon Nanotubes by Thermal CVD

Carbon nanotubes with a few shells are synthesized using thermal chemical vapor depositions. The sizes of these carbon nanotubes (CNT) are quite uniform and the length is up to several tens of micrometers. With the particular substrate location for which the substrate surface is normal along or against the gravity vector, different growth orientations of CNT are observed by scanning electron microscopy, though the Raman spectra for samples at different locations are similar to each other. The results suggest the gravitation effects in growth of the long and small diameter CNT.

Zhu, S.↗
NASA NTRS2001

Computational Relativistic Astrophysics Using the Flowfield-Dependent Variation Theory

Theoretical models, observations and measurements have preoccupied astrophysicists for many centuries. Only in recent years, has the theory of relativity as applied to astrophysical flows met the challenges of how the governing equations can be solved numerically with accuracy and efficiency. Even without the effects of relativity, the physics of magnetohydrodynamic flow instability, turbulence, radiation, and enhanced transport in accretion disks has not been completely resolved. Relativistic effects become pronounced in such cases as jet formation from black hole magnetized accretion disks and also in the study of Gamma-Ray bursts (GRB). Thus, our concern in this paper is to reexamine existing numerical simulation tools as to the accuracy and efficiency of computations and introduce a new approach known as the flowfield-dependent variation (FDV) method. The main feature of the FDV method consists of accommodating discontinuities of shock waves and high gradients of flow variables such as occur in turbulence and unstable motions. In this paper, the physics involved in the solution of relativistic hydrodynamics and solution strategies of the FDV theory are elaborated. The general relativistic astrophysical flow and shock solver (GRAFSS) is introduced, and some simple example problems for Computational Relativistic Astrophysics (CRA) are demonstrated.

Richardson, G. A.↗
NASA NTRS2001

Carbon Nanotubes Growth by CVD in Various Conditions

Since the superior properties of multi-wall carbon nanotubes (MWCNT could be used in numerous devices such as electronics and sensors, many efforts have been engaged in synthesizing particular structural or dimensional MWCNT. This presentation will illustrate MWCNT synthesized on silicon substrates by thermal CVD. On the substrate, an array of catalysts is coated using sputtering deposition. A thin Ti buffer layer is also coated on some Si substrates prior to depositing catalyst particles. Nickel, cobalt or iron transition metals are used as catalysts for the MWCNT growth. Since the diameter of MWCNT depends on the size of catalyst particles, the catalyst particle size is investigated after annealed at various temperatures. MWCNT are grown on the substrate in the temperature range of 700 to 1000 C and the pressure range of 100 torr to one atmosphere. Methane and hydrogen gases with methane content of 10% to 100% are used for the MWCNT synthesis. Morphology, length and diameter of these MWCNT are determined by scanning electron microscopy and Raman spectroscopy. The detailed results of syntheses and characterizations will be discussed in the presentation.

Zhu, S.↗
NASA NTRS2001

First Materials Science Research Rack Capabilities and Design Features

The first Materials Science Research Rack (MSRR-1) will accommodate dual Experiment Modules (EM's) and provide simultaneous on-orbit processing operations capability. The first international Materials Science Experiment Module for the MSRR-1 is an international cooperative research activity between NASA's Marshall Space Flight Center (MSFC) and the European Space Agency's (ESA) European Space Research and Technology Center. (ESTEC). This International Standard Payload Rack (ISPR) will contain the Materials Science Laboratory (MSL) developed by ESA as an Experiment Module. The MSL Experiment Module will accommodate several on-orbit exchangeable experiment-specific Module Inserts. Module Inserts currently planned are a Quench Module Insert, Low Gradient Furnace, Solidification with Quench Furnace, and Diffusion Module Insert. The second Experiment Module for the MSRR-1 configuration is a commercial device supplied by MSFC's Space Products Department (SPD). It includes capabilities for vapor transport processes and liquid metal sintering. This Experiment Module will be replaced on-orbit with other NASA Materials Science EMs.

Schaefer, D.↗