Engineering topics
Publications and source records attributed to Weinberg, J. L..
In the following we present material in tabular and graphical form, with the aim to allow the non specialist to obtain a realistic estimate of the diffuse night sky brightness over a wide range of wavelengths from the far UV longward of Ly to the far-infrared.
The Interplanetary Dust Experiment (IDE) provided high time resolution detection of microparticle impacts on the Long Duration Exposure Facility satellite. Particles, in the diameter range from 0.2 microns to several hundred microns, were detected impacting on six orthogonal surfaces of the gravity-gradient stabilized LDEF spacecraft. The total sensitive surface area was about one square meter, distributed between LDEF rows 3 (Wake or West), 6 (South), 9 (Ram or East), 12 (North), as well as the Space and Earth ends of LDEF. The time of each impact is known to an accuracy that corresponds to better than one degree in orbital longitude. Because LDEF was gravity-gradient stabilized and magnetically damped, the direction of the normal to each detector panel is precisely known for each impact. The 11 1/2 month tape-recorded data set represents the most extensive record gathered of the number, orbital location, and incidence direction for microparticle impacts in low Earth orbit. Perhaps the most striking result from IDE was the discovery that microparticle impacts, especially on the Ram, South, and North surfaces, were highly episodic. Most such impacts occurred in localized regions of the orbit for dozens or even hundreds of orbits in what we have termed Multiple Orbit Event Sequences (MOES). In addition, more than a dozen intense and short-lived 'spikes' were seen in which impact fluxes exceeded the background by several orders of magnitude. These events were distributed in a highly non-uniform fashion in time and terrestrial longitude and latitude.
The Long Duration Exposure Facility (LDEF) is a 12-sided, 4.3-m-diameter, 9.1-m-long cylinder designed and built by NASA Langley to carry experiments for extended periods in space. The LDEF was first placed in orbit by the Shuttle Challenger on 7 April 1984 and recovered by the Shuttle Columbia in January 1990, only days before it was expected to burn up in the earth's atmosphere. The Interplanetary Dust Experiment (IDE) was designed to detect impacts of extra-terrestrial particles and orbital debris. The IDE detectors (which covered about 1 sq m of the surface of LDEF) were sensitive to particles ranging in size from about 0.2 to 100 microns. Data were recorded for 11.5 months before the supply of magnetic tape was exhausted. Examination of the LDEF IDE dataset shows that impacts often occurred in 'bursts', during which numerous impacts occurred in a short time (typically 3-5 min) at a rate much greater than the average impact rate. In several cases, such events reoccurred each time the LDEF returned to the same point in its orbit. Such multi-orbit event sequences were found to extend for as many as 25 or more orbits.
A low mass eight-color channel photopolarimeter was developed for the Giotto spacecraft. Utilizing the spin of the spacecraft, a multichannel plate photomultiplier, and a unique optical design, the instrument required no moving parts to measure color and linear polarization. The photopolarimeter collected data as the spacecraft passed through the coma of Comet Halley on March 13 and 14, 1986. This instrument's design, calibration, and reduction are discussed and some final results are presented.
The LDEF Interplanetary Dust Experiment is unique in providing a time history of impacts of micron-sized particles on six orthogonal faces of the vehicle over a span of nearly a full year. Over 15,000 hits were recorded, representing a mix of zodiacal dust, meteor-stream grains, orbital debris, perhaps beta-meteoroids, and possibly interstellar matter. Although the total number was higher than predicted, the relative panel activity distribution was near expectations. Detailed deconvolution of the impact record with orbital data is underway, to examine each of these populations. Very preliminary results of the fairly crude 'first-look' analysis suggest that debris is the major particle component at 500 km. The data show clear evidence of some known meteor streams as sharp, tightly-focused events, unlike their visible counterparts. Some apparent debris events show similar signatures. Data from the leading and trailing edges suggest a detection of beta-meteoroids, but the analysis is not yet conclusive. Absolute fluxes and flux ratios are not yet known, since the detector status analysis is yet incomplete.
The location in space of the symmetry surface of the zodiacal cloud at elongation angles 110-140 deg from the sun is determined from observations of the zodiacal light taken from the Pioneer 10 space probe, and from the zodiacal light experiment on Skylab. The inclination and ascending node of the symmetry surface from the ecliptic plane are shown to be about 1.2 and 23 deg, respectively, closest to those of the orbital plane of Mars. These results are consistent with those obtained from IRAS at elongation angle of 90 deg from the sun.
Ground-based observations of the evening zodiacal light are used to derive a table of zodiacal light brightnesses at spatial resolutions as small as 0.5 deg in differential ecliptic longitude and 1.0 deg in ecliptic latitude. Significant differences are found in the brightness distribution above and below the ecliptic plane. Attention is given to a feature found in the brightness at all ecliptic latitudes, between differential ecliptic longitudes 39 deg and 42 deg.
Ground-based observation of the evening zodiacal light taken by Weinberg and Mann (1967) from Mt. Halaekala, Hawaii, during March 1966 are used to derive a table of zodiacal light brightnesses at high spatial resolution (as little as 0.5 deg in differential ecliptic longitude, DEL and 1.0 deg in ecliptic latitude beta) over the DEL region 29.5-56 deg, beta = -30 to +30 deg. Significant differences are found in the brightness distributions above and below the ecliptic plane.
The Halley Optical Probe Experiment (HOPE) will furnish in situ photopolarimetric data on Comet Halley's coma dust cloud and atmosphere. The optical probe concept involves measurements of the polarized spectral radiance in the direction of motion at two points on the spacecraft trajectory, parallel to the direction of motion; their difference is the spatial derivative of the radiance along the line-of-sight, as well as of the light scattered by dust or emitted by gas in a tube along the trajectory. HOPE is proposed for the Giotto spacecraft's flyby of Comet Halley.
Direct light form the Sun and the sunlit Earth, and indirect light from these same sources reflected off parts of the orbiter and its payload were the two major sources of light seen in the bay during spacecraft day. Brightness arising from sunlight reflected off particulates originating from the spacecraft (corona or induced atmosphere) were tentatively identified. Sources of light observed during spacecraft night include large scale diffuse glows associated with Vernier thruster firings, surface glows on the orbiter in the direction of orbiter n motion, and periodic sky brightness structures observed primarily at 4200 A and 6300 A. Some information was obtained on the size and trajectories of individual contaminant particulates. Astronomical data were obtained from large regions of the Milky Way and zodiacal light, including large regions to within 35 deg of the Sun and possibly closer. Coordinated and sometimes simultaneous observations were successfully made from Hawaii and from STS-3 to provide unique information on atmospheric sources and sinks of radiation.
The zodiacal light experiment to be flown aboard the International Solar Polar Mission in 1985 is presented. Overall objectives of the Zodiacal Light/Background Starlight Experiment include the study of the brightness, polarization, and color of the diffuse sky brightness and the determination of the spatial distributions and physical properties of the interplanetary dust as a function of spacecraft position in and out of the ecliptic. To meet these objectives, a multicolor sky-scanning photopolarimeter will be carried on the NASA spacecraft which will provide optimized stray light suppression and a capability for changing the viewing cone angle based on the use of a stepping device. Brightness and polarization measurements will be made for 11 center wavelengths in the UV and visible with 5.6 deg circular and 1.0 sq deg rectangular fields of view.
A method is outlined for evaluating discrete and background starlight at the Skylab wavelengths so as to derive the total brightness of zodiacal light at five sky positions. These sky positions are north celestial pole, south ecliptic pole, vernal equinox and two places near the north galactic pole. Pioneer 10/11 imaging photopolarimeters were used to periodically measure sky brightness and polarization in the blue and red at heliocentric distances beyond 1.002 AU. Mean zodiacal light, which is assumed to be also solar color in total light, is then estimated by applying the method to all fixed-point observations.
The planned space shuttle mission STS-4 will use the Skylab flight spare ten-color (near UV to near IR) photopolarimeter with boresighted 16 mm camera. This 164-hour mission will observe the zodiacal light to within approximately 20 deg of the sun (in and out of the ecliptic). The mission consists of several distinct phases: (1) tail-to-sun (TTS), belly to earth for 18 hours; (2) nose-to-sun, solar inertial for 79 hours; (3) bay-to-sun for 26 hours; and (4) passive thermal control for 37 hours. During the TTS phase, where most observations are scheduled, the instrument will scan back and forth in elevation at 4 deg/sec while the orbiter moves across the sky at its 4 deg/min orbital rate. The combined orbiter/instrument motion will result in a saw-tooth pattern of observations projected on the sky (between the 14 deg and 120 deg elevation limits) and will enable extensive measurements of the brightness, polarization and color of the background starlight to be made.
The unique vantage points and viewing geometries afforded by a close-in solar probe are briefly examined with regard to line and continuum measurements of features on the solar disk, the K and F coronas, and the zodiacal light. Common instrument and observing requirements are identified, suggesting that a single instrument could provide much of the necessary observational data on these phenomena.
By use of observations of zodiacal light, the symmetry plane or plane of maximum density of interplanetary dust at elongations of 32 deg to 50 deg from the sun has been found to be closer to the orbital plane of Venus than to the invariable plane. This suggests that the plane of maximum density in this region is being gravitationally perturbed closer to the orbital plane of Venus.
The most striking feature of the night sky in the tropics is the zodiacal light, which appears as a cone in the west after sunset and in the east before sunrise. It is caused by sunlight scattered or absorbed by particles in the interplanetary medium. The zodiacal light is the only source of information about the integrated properties of the whole ensemble of interplanetary dust. The brightness and polarization in different directions and at different colors can provide information on the optical properties and spatial distribution of the scattering particles. The zodiacal light arises from two independent physical processes related to the scattering of solar continuum radiation by interplanetary dust and to thermal emission which arises from solar radiation that is absorbed by interplanetary dust and reemitted mainly at infrared wavelengths. Attention is given to observational parameters of zodiacal light, the methods of observation, errors and absolute calibration, and the observed characteristics of zodiacal light.
A ten-color Fabry photometer was used during Skylab missions SL-2 and SL-3 to measure sky brightness and polarization associated with zodiacal light, background starlight, F region airglow, and spacecraft corona. A brief description is given of the design, calibration, and performance of the instrument.
Techniques originally developed for the Skylab T025 contamination experiment were applied to S052 white-light coronagraph data in a preliminary study to investigate particulates around Skylab. Periods were selected which contained some contamination, even though there were no apparent dumps or vents during these periods. Velocity and size distributions were determined from optical data for particles within 200 meters of the spacecraft. Both photographic (61 particle tracks) and video (34 particles) observations yield an upper limit on particle radius of 100 micrometers. Selected photometric data from the S073 zodiacal light experiment during mission SL-2 were also examined for evidence of contamination.