Engineering topics
Wehrfritz, Armin
Publications and source records attributed to Wehrfritz, Armin.
An a priori evaluation of a principal component and artificial neural network based combustion model in diesel engine conditions
A principal component analysis (PCA) and artificial neural network (ANN) based chemistry tabulation approach is presented. ANNs are used to map the thermochemical state onto a low-dimensional manifold consisting of five control variables that have been identified using PCA. Three canonical configurations are considered to train the PCA-ANN model: a series of homogeneous reactors, a nonpremixed flamelet, and a two-dimensional lifted flame. The performance of the model in predicting the thermochemical manifold of a spatially-developing turbulent jet flame in diesel engine thermochemical conditions is a priori evaluated using direct numerical simulation (DNS) data. The PCA-ANN approach is compared with a conventional tabulation approach (tabulation using ad hoc defined control variables and linear interpolation). The PCA-ANN model provides higher accuracy and requires several orders of magnitude less memory. Here, these observations indicate that the PCA-ANN model is superior for chemistry tabulation, especially for modelling complex chemistries that present multiple combustion modes as observed in diesel combustion. The performance of the PCA-ANN model is then compared to the optimal estimator, i.e. the conditional mean from the DNS. The results indicate that the PCA-ANN model gives high prediction accuracy, comparable to the optimal estimator, especially for major species and the thermophysical properties. Higher errors are observed for the minor species and reaction rate predictions when compared to the optimal estimator. It is shown that the prediction of minor species and reaction rates can be improved by using training data that exhibits a variation of parameters as observed in the turbulent flame. The output of the ANN is analysed to assess mass conservation. It is observed that the ANN incurs a mean absolute error of 0.05% in mass conservation. Furthermore, it is demonstrated that this error can be reduced by modifying the cost function of the ANN to penalise for deviation from mass conservation.
Structure and propagation of two-dimensional, partially premixed, laminar flames in diesel engine conditions
We investigate here the influence of inflow velocity (V in ) and scalar dissipation rate (χ) on the flame structure and stabilisation mechanism of steady, laminar partially premixed n-dodecane edge flames stabilised on a convective mixing layer. Numerical simulations were performed for three different χ profiles and several V in (V in = 0.2 to 2.5m/s). The ambient thermochemical conditions were the same as the Engine Combustion Network’s (ECN) Spray A flame, which in turn represents conditions in a typical heavy duty diesel engine. The results of a combustion mode analysis of the simulations indicate that the flame structure and stabilisation mechanism depend on V in and χ. For low V in the flame is attached. Increasing V in causes the high-temperature chemistry (HTC) flame to lift-off, while the low-temperature chemistry (LTC) flame is still attached. A unique speed S R associated with this transition is defined as the velocity at which the lifted height has the maximum sensitivity to changes in Vin. This transition velocity is negatively correlated with χ. Near V i n = S R a tetrabrachial flame structure is observed consisting of a triple flame, stabilised by flame propagation into the products of an upstream LTC branch. Further increasing the inlet velocity changes the flame structure to a pentabrachial one, where an additional HTC ignition branch is observed upstream of the triple flame and ignition begins to contribute to the flame stabilisation. At large V in , the LTC is eventually lifted, and the speed at which this transition occurs is insensitive to χ. Further increasing V in increases the contribution of ignition to flame stabilisation until the flame is completely ignition stabilised. Flow divergence caused by the LTC branch reduces the χ at the HTC branches making the HTC more resilient to χ. The results are discussed in the context of identification of possible stabilisation modes in turbulent flames.