Engineering Papers⌕ Search

Engineering topics

Weaver, Matt

Publications and source records attributed to Weaver, Matt.

At least 19 records

slaclab/epix-quad

This is the repository for "slaclab/epix-quad" developed by SLAC National Accelerator Laboratory.

Kwiatkowski, Maciej↗

LCLS2

This is the LCLS II development repository developed at SLAC National Accelerator Laboratory.

Dubrovin, Mikhail↗

slac-lcls/ami

The LCLS-II online graphical analysis monitoring package.

Yamajala, Seshu↗

slaclab/llrf-hls

This is the repository for "llrf-hls" developed by SLAC National Accelerator Laboratory.

Vasquez, Jesus↗

slaclab/epix

This is the repository for "slaclab/epix" developed by SLAC National Accelerator Laboratory.

Kwiatkowski, Maciej↗

slaclab/lcls-pcav

This is the repository for "lcls-pcav" developed by SLAC National Accelerator Laboratory.

Xu, Charlie↗

The ePix10k 2-megapixel hard X-ray detector at LCLS

The ePix10ka2M (ePix10k) is a new large area detector specifically developed for X-ray free-electron laser (XFEL) applications. The hybrid pixel detector was developed at SLAC to provide a hard X-ray area detector with a high dynamic range, running at the 120 Hz repetition rate of the Linac Coherent Light Source (LCLS). The ePix10k consists of 16 modules, each with 352 × 384 pixels of 100 µm × 100 µm distributed on four ASICs, resulting in a 2.16 megapixel detector, with a 16.5 cm × 16.5 cm active area and ∼80% coverage. The high dynamic range is achieved with three distinct gain settings (low, medium, high) as well as two auto-ranging modes (high-to-low and medium-to-low). Here the three fixed gain modes are evaluated. The resulting dynamic range (from single photon counting to 10000 photons pixel −1 pulse −1 at 8 keV) makes it suitable for a large number of different XFEL experiments. The ePix10k replaces the large CSPAD in operation since 2011. The dimensions of the two detectors are similar, making the upgrade from CSPAD to ePix10k straightforward for most setups, with the ePix10k improving on experimental performance. The SLAC-developed ePix cameras all utilize a similar platform, are tailored to target different experimental conditions and are designed to provide an upgrade path for future high-repetition-rate XFELs. Here the first measurements on this new ePix10k detector are presented and the performance under typical XFEL conditions evaluated during an LCLS X-ray diffuse scattering experiment measuring the 9.5 keV X-ray photons scattered from a thin liquid jet.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

slaclab/pgp-pcie-apps

This is the repository for "pgp-pcie-apps" developed by SLAC National Accelerator Laboratory.

Ruckman, Larry↗

CameraLink Gateway

This is the repository for "CameraLink Gateway" developed by SLAC National Accelerator Laboratory.

Ruckman, Larry↗

slaclab/pgp-gen3-pcie-card

This is the repository for "pgp-gen3-pcie-card" developed by SLAC National Accelerator Laboratory.

Ruckman, Larry↗

axi-pcie-core

This GIT repository is intended to be a common firmware library submodule used by many other applications.

Ruckman, Larry↗

slaclab/amc-carrier-core

This is the repository for "slaclab/amc-carrier-core" developed by SLAC National Accelerator Laboratory.

Ruckman, Larry↗

X-ray detectors at the Linac Coherent Light Source

Free-electron lasers (FELs) present new challenges for camera development compared with conventional light sources. At SLAC a variety of technologies are being used to match the demands of the Linac Coherent Light Source (LCLS) and to support a wide range of scientific applications. In this paper an overview of X-ray detector design requirements at FELs is presented and the various cameras in use at SLAC are described for the benefit of users planning experiments or analysts looking at data. Features and operation of the CSPAD camera, which is currently deployed at LCLS, are discussed, and the ePix family, a new generation of cameras under development at SLAC, is introduced.

43 PARTICLE ACCELERATORS↗