Engineering Papers⌕ Search

Engineering topics

Ward, Patrick A.

Publications and source records attributed to Ward, Patrick A..

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Systems and related methods for collecting light transmitted through an architectural opening

In one aspect, a system for collecting light directed through an architectural opening includes a plurality of optical fibers positioned within the architectural opening. A portion of light from a light source is absorbed by the plurality of optical fibers. One or more optical fibers of the plurality of optical fibers are configured to transmit the absorbed light to one or more light collection elements.

Ward, Patrick A.↗
DOE OSTI2024

Pressure-Dependent Phase Behavior of Chemically Synthesized Ytterbium Hydride Nanoparticles and Confinement in CMK-3

In this work, we developed a chemical synthesis protocol to prepare both spherical and rod shaped YbH x nanoparticles and infiltrate a mesoporous CMK-3 structure with YbH x nanoparticles. The phase evolution of the YbH x nanoparticles was monitored as a function of the pressure in a diamond anvil cell. The cell volume of the Yb atom showed an unexpected positive deviation from the calculated equation of state (EoS) for the α-phase (space group Pnma) of YbH x . Additionally, the β-phase (space group Fm3̅m) YbH x nanoparticles appeared to become amorphous at approximately 27 GPa, although the same behavior was not observed in the Pnma (α-phase). The Pmna phase remained stable (measured up to 59.3 GPa) and showed a significantly higher than expected volume per Yb atom relative to the calculated EoS. This deviation could be attributed to the nanoscale effect on the thermodynamics of ytterbium hydride formation, which could provide a path forward to accessing higher order ytterbium hydrides (YbH x , x > 3) at pressures much lower than in the bulk metal.

diamond anvil cell↗
DOE OSTI2024

Systems and related methods for collecting light transmitted through an architectural opening

In one aspect, a system for collecting light directed through an architectural opening includes a plurality of optical fibers positioned within the architectural opening. A portion of light from a light source is absorbed by the plurality of optical fibers. One or more optical fibers of the plurality of optical fibers are configured to transmit the absorbed light to one or more light collection elements.

Ward, Patrick A.↗
DOE OSTI2024

High temperature thermochemical energy storage materials

Disclosed are high enthalpy thermochemical energy storage materials that exhibit high thermal conductivity and stability at high temperature reaction conditions. Disclosed materials include hydride-based alloys that can undergo high temperature reversible hydrogenation/dehydrogenation reactions without phase change of any metal or metalloid components of the alloy. The materials undergo a reversible exothermic hydrogenation reaction to form a metal hydride and a ternary alloy that includes a high thermal conductivity metal that, in its pure state, would exhibit a phase change at the hydrogenation reaction conditions.

Ward, Patrick A.↗
DOE OSTI2024

Magnetic properties of Lutetium and Yttrium doped Ce 2 Fe 14 B magnets

The increasing demand for Nd-Dy and Sm-Co based permanent magnets is exacerbating the current critical materials shortage, therefore improving and optimizing current candidate critical element free permanent magnets is necessary to develop future clean energy technologies. In this work, we aim to increase the thermal stability and magnetic performance of Ce 2 Fe 14 B based permanent magnets through the substitution of Ce ions with noncritical rare earth elements Lu and Y. The substitution of Lu (x=0; 0.05; 0.1; 0.15) for Ce ions in (LuxCe 2-x )Fe 14 B was unsuccessful, likely due to disparities in ionic size and valencies, and failed to exhibit improved thermal stability or magnetic performance. In contrast, Y substitution for Ce ions in (Y x Ce 2-x )Fe14B (x= 0.1; 0.2; 0.3; 0.4; 0.5) alloys was successful. Notably, these alloys demonstrated enhanced thermal stability, as evidenced by an increase in the Curie temperature, reaching a peak of 443 K at x= 0.5. Y substitution also helped to suppress the CeFe2 Laves phase. Without loss of the anisotropy field Y substitution increased the saturation magnetization, MS, peaking at MS = 125 emu/g for a Y concentration of x= 0:4, demonstrating (Y 0.4 Ce 1.6 )Fe 14 B as a potential critical element free permanent magnet with an energy product as high as 29 MGOe. This work is advantageous in developing low cost high performance permanent magnets with reduced or little to no critical rare earth elements.

Rai, Binod K.↗
DOE OSTI2023

Influence of oxygen on the optical and electrical properties of magnetron-sputtered indium tin oxide thin films at ambient temperature

Indium Tin Oxide (ITO) thin films are commonly used as transparent conductive layers in the production of solar cells. ITO films are typically heat-treated at temperatures exceeding 200 °C after magnetron sputtering to optimize the physical, optical, and electrical characteristics for photovoltaic devices. Here, this high temperature heating procedure greatly limits the use of potential substrates, particularly those comprised of low-temperature-rated polymers. Herein, we examine the physical, optical, and electrical transport effects of oxygen:argon plasmas during radio frequency magnetron sputtering of ITO on glass and flexible polymer surfaces without subsequent heat treatment. ITO thin films were characterized via sheet resistance testing, UV-Vis spectroscopy, X-ray diffraction, and scanning electron microscopy imaging. Sheet resistance measurements revealed an increase in surface resistance with increasing oxygen concentration during sputtering. UV-Vis optical transmittance measurements demonstrated an improvement in optical transmittance with an increase in oxygen concentration reaching a maximum transmittance at an oxygen concentration of 1-2 %. Most importantly, it was discovered that producing bilayers of ITO with pure argon sputtered plasmas followed by oxygen:argon plasmas produced ITO thin films with suitable resistance and transmittance without the need for high temperature post annealing. These results highlight a methodology for the deposition of ITO thin films on temperature sensitive substrates for flexible photovoltaics and low-cost module production.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Tuning MXene Surface Terminations for Strategic Control of Physical Properties

Scientific Achievement • Ti3C2Tx surfaces with a higher hydroxyl group concentration play a pivotal role in surface properties and were found to be thermodynamically stable. • From the electronic bonding analysis, the charge density difference and electron localization function demonstrated a significant electron localization at the hydroxyl group, which results in a locally induced dipole on the surface. • A large tunability in the work function is found from different concentrations of functional groups on the surface which can be controlled by the concentration of HF used for etching of the MAX phase to produce the resulting MXene. Research Details • The influence of termination group distribution on the surface of Ti3C2Tx MXenes from various etching concentrations of HF was evaluated • The work functions of Ti3C2Tx MXenes with differing concentrations of functional groups were determined • The influence of termination group clustering on the surface of Ti3C2Tx MXenes was investigated by visualization of the electron localization function and charge density difference

Ward, Patrick A.↗
DOE OSTI2023

Synthesis and Characterization of Amorphous Lawsone Polymer Dots for Fluorescent Applications

In this work, a two-step hydrothermal/solvothermal process was developed to generate highly fluorescent lawsone polymer dots (LPDs) utilizing an inexpensive and abundant starting material, 2-hydroxy-1,4-napththoquinone (lawsone). This hydrothermal/solvothermal process produces LPDs that have excitation independent emission with well-defined electronic transitions. This two-step protocol provides a straightforward approach to remove unwanted small molecular fluorescence, which has plagued carbon dot systems, without the need for advanced chromatographic purification methods or steps. A series of spectroscopic, electrochemical, and theoretical experiments suggest that this process proceeds via a sequential dehydration and dehydrogenation pathway to cross-link the lawsone into a carbon dot structure. This polymerization process helps to stabilize and favor certain electronic transitions inherently present in the lawsone monomer. The generation of the LPDs results in a 2 order of magnitude increase in the emission intensity and a quantum yield of 37%. This behavior is likely the result of the cross-linked structure shielding these electronic states from deactivation caused by nonradiative processes such as vibrational coupling and excited state quenching from thermal deactivation and solvent collisions. This finding is consistent with a cross-linked enhanced emission (CEE) mechanism, as previously observed for other similar systems. The LPDs were then incorporated into a TiO2 photoanode and utilized as a photosensitizer in a dye-sensitized solar cell (DSSC) which showed an enhancement in photocurrent density over pure TiO2. We also prepared a derivative of the LPDs utilizing a diethylene triamine additive (nitrogen-doped lawsone polymer dots (N-LPDs)) using the same two-step protocol and demonstrated its potential as a fluorescence microscopy dye for imaging MDA-MB-231 cancer cells.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Influence of MXene termination groups on hydrogen interactions

MXenes are a relatively new class of nanomaterial consisting of alternating layers of transition metals and carbon or nitrogen, capped off on either end by terminal groups, usually from the P-block. They have been considered for a wide range of purposes, including hydrogen storage. In this study, thermogravimetric analysis and mass spectrometry residual gas analysis are performed on Ti 3 C 2 T x and Ti 2 CT x to characterize their terminal groups. The hydrogen absorption capabilities of the heat-treated samples are measured using a Sievert apparatus and compared against untreated samples. This reveals that, during heating, the MXenes lose hydrogen, water, fluoride, hydrofluoric acid, and carbon dioxide. Isothermal absorption measurements suggest that the removal of termination groups might improve hydrogen uptake kinetics at high temperatures, but has little effect at room temperatures.

08 HYDROGEN↗
DOE OSTI2022

Enhancing Charge Injection in Polyoxometalate-based Dye-Sensitized Solar Cells

A series of 3d-transition metal containing polyoxometalates have been synthesized. These materials were successfully characterized using a variety of spectroscopic and electrochemical techniques. A selected polyoxometalate was sensitized with a porphyrin-based dye to permit for more efficient solar spectrum utilization.

14 SOLAR ENERGY↗
DOE OSTI2022

Formation of high quality alane

Methods for forming alane are described. The method includes addition of toluene at a temperature above the crystallization temperature of alane to a lower temperature solution that includes alane adduct, ether, and toluene. Upon the addition, a crystallization mixture is formed that is at or near the crystallization temperature of alane. The alane of the mixture crystallizes over a period of time to form a high purity alane polymorph.

Zidan, Ragaiy↗
DOE OSTI2022

Study Non-Conventional Deep Eutectic Electrolytes for Lithium Ion Batteries [Poster]

In the field of energy storage, electrolytes are the materials or liquids used to transport ions or redox active chemicals to facilitate an electrochemical process. While conventional electrolytes are generally inexpensive and work well with lithium-ion batteries, they have many shortfalls however, such as corrosion of the cell, flammability, toxicity, price, and incompatibility with other metals. Our work highlights the formation of a novel deep eutectic electrolyte (DEE) based on methyl carbamate and lithium salts. This DEE shows good cycling performance with the potential for low temperature operation. This study provides insights into a relatively unexplored field of non-conventional electrolyte systems.

25 ENERGY STORAGE↗
DOE OSTI2022

Understanding Photocarrier and Gas Dynamics to Rationally Design Heterostructured Nanocatalysts for Efficient Solar CO 2 Conversion

Recent research in CO 2 photocatalysis has largely focused on exploring new catalysts; however, details of the relationship between charge carrier dynamics and gas dynamics on the surface of nanomaterials often remain unclear. Knowledge of these processes will allow one to rationally design highly efficient catalysts for solar CO 2 conversion. This project aimed to develop state-of-the-art techniques and establish new capabilities in SRNL to enable the study of photocatalysts and other materials in detail. In FY21, we developed two new in situ techniques that are unique to SRNL, allowing the study of reaction intermediates and adsorbed gases during photocatalysis at various wavelengths of excitation. We also established a new in-house capability for catalyst synthesis and product evaluation which enables a deep understanding of how catalyst preparation methodologies impact product generation. In FY22, we gained in-house expertise and knowledge on the newly constructed a physical vapor deposition device, i.e. glancing angle deposition (GLAD) system, and constructed a flow photoreactor system for CO 2 photoconversion and other photocatalytic studies.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

Solar Receiver with Integrated Thermal Storage for a Supercritical Carbon Dioxide Power Cycle

This project endeavors to design and demonstrate an integrated CSP system that meets the Department of Energy’s 6¢/kW-hr LCOE goal. This design is based on the 10 MW e Supercritical Transformational Electric Power (STEP) engine specifications, but adaptable to any sCO 2 power module up to 10 MW e . The enabling technology to be tested is a new class of metal hydride based thermal energy storage materials which can store thermal energy in the hydrogen bonds between the metal hydride and hydrogen. This thermochemical energy storage solution provides a much greater energy density than sensible and latent energy storage enabling an integrated system design that closely linked the metal hydride to the power block. This allows the entire system to be mounted up tower to provide cost reductions.

14 SOLAR ENERGY↗
DOE OSTI2022

Methyl Carbamate-Lithium Salt Deep Eutectic Electrolyte for Lithium-Ion Batteries

Deep eutectic electrolytes (DEEs) represent a burgeoning field in electrolytes for energy storage applications. Compared to the more conventionally studied Li-ion electrolyte systems, these electrolytes offer numerous advantages, such as high ion concentration, costs, lower temperature operation, and safety. In this work, the formation of a novel eutectic electrolyte based on lithium salts and methyl carbamate was reported. These DEEs were formed via mixing lithium salts and low-cost methyl carbamate at ratios varying from 1:2 to 1:5 (mol:mol). Here, the DEE formed from methyl carbamate and lithium hexafluorophosphate (LiPF 6 ) at a 1:5 molar ratio generated a 4V stability window and a 25°C conductivity of up to 3.16E –3 S cm –1 . The DEE formed from methyl carbamate and lithium bis(trifluoromethane)sulfonimide (LiTFSI) at a 1:5 molar ratio generated a 3.2 V stability window and a 25°C conductivity of up to 2.87E –3 S cm –1 . The LiPF 6 DEE also demonstrated a discharge capacity of 128 mAh g –1 after 50 cycles with 93% discharge capacity retention at moderate cycling rates of 0.5C in a lithium titanate (LTO)/lithium iron phosphate (LFP) full cell. These results demonstrate the potential for methyl carbamate to generate eutectics from lithium salts and offer alternative electrolytes for use in low-temperature Li-ion battery applications.

25 ENERGY STORAGE↗
DOE OSTI2022

Spectroscopic investigation of the electronic and excited state properties of para-substituted tetraphenyl porphyrins and their electrochemically generated ions

Porphyrins play pivotal roles in many crucial biological processes including photosynthesis. However, there is still a knowledge gap in understanding electronic and excited state implications associated with functionalization of the porphyrin ring system. These effects can have electrochemical and spectroscopic signatures that reveal the complex nature of these somewhat minor substitutions, beyond simple inductive or electronic effect correlations. To obtain a deeper insight into the influences of porphyrin functionalization, four free-base, meso-substituted porphyrins: tetraphenyl porphyrin (TPP), tetra(4-hydroxyphenyl) porphyrin (THPP), tetra(4-carboxyphenyl) porphyrin (TCPP), and tetra(4-nitrophenyl) porphyrin (TNPP), were synthesized, characterized, and investigated. The influence of various substituents, (-hydroxy,-carboxy, and -nitro) in the para position of the meso-substituted phenyl moieties were evaluated by spectroelectrochemical techniques (absorption and fluorescence), femtosecond transient absorption spectroscopy, cyclic and differential pulse voltammetry, ultraviolet photoelectron spectroscopy (UPS), and time-dependent density functional theory (TD-DFT). Spectral features were evaluated for the neutral porphyrins and differences observed among the various porphyrins were further explained using rendered frontier molecular orbitals pertaining to the relevant transitions. Electrochemically generated anionic and cationic porphyrin species indicate similar absorbance spectroscopic signatures attributed to a red-shift in the Soret band. Emissive behavior reveals the emergence of one new fluorescence decay pathway for the ionic porphyrin, distinct from the neutral macrocycle. Femtosecond transient absorption spectroscopy analysis provided further analysis of the implications on the excited-state as a function of the para substituent of the free-base meso-substituted tetraphenyl porphyrins. Herein, we provide an in-depth and comprehensive analysis of the electronic and excited state effects associated with systematically varying the induced dipole at the methine bridge of the free-base porphyrin macrocycle and the spectroscopic signatures related to the neutral, anionic, and cationic species of these porphyrins.

59 BASIC BIOLOGICAL SCIENCES↗