Engineering Papers⌕ Search

Engineering topics

Wang, Yaxin

Publications and source records attributed to Wang, Yaxin.

Polymer Single‐Chain Nanoparticles: Shaping Solid Surfactants

Polymer single-chain nanoparticles (SCNPs) have found a wide range of applications spanning catalysts, sensors and nanomedicine. The generation of structured SCNPs from star-shaped polymers with diverse architectures and functionalities affords a new avenue to expand the emerging research area. The large-scale synthesis of structured SCNPs is described by the electrostatics-mediated intramolecular crosslinking of three types of 3-armed star-shaped polymers (T-P4VP, T-PS-b-P4VP, and T-P4VP-b-PS), whose configuration is tunable from spherical to cage-shaped to dumbbell-shaped and star-shaped. The structured SCNPs are amphiphilic and can be used as solid surfactants to stabilize different types of emulsions.

Li, Shuailong↗

MXene-Based Porous Monoliths

In the past decade, a thriving family of 2D nanomaterials, transition-metal carbides/nitrides (MXenes), have garnered tremendous interest due to its intriguing physical/chemical properties, structural features, and versatile functionality. Integrating these 2D nanosheets into 3D monoliths offers an exciting and powerful platform for translating their fundamental advantages into practical applications. Introducing internal pores, such as isotropic pores and aligned channels, within the monoliths can not only address the restacking of MXenes, but also afford a series of novel and, in some cases, unique structural merits to advance the utility of the MXene-based materials. Here, a brief overview of the development of MXene-based porous monoliths, in terms of the types of microstructures, is provided, focusing on the pore design and how the porous microstructure affects the application performance.

2D nanomaterials↗

Evolution of Micro-structure and Magnetic Properties in L1{sub 0} CoPt Nanoparticles by Au Addition

L1{sub 0} CoPt-Au nanoparticles with face-centered tetragonal (FCT) structure were synthesized by sol-gel technique at 700°C. The micro-structure and magnetism of L1{sub 0} CoPt-Au were measured by different measuring technologies. The influences of Au on the micro-structure and magnetism of L1{sub 0} CoPt nanoparticles were investigated. The Au addition promoted the formation of ordered L1{sub 0} phase CoPt nanoparticles and improved the grain size of L1{sub 0} CoPt nanoparticles When the Au content increased to 10 at.%, coercivity increased and saturation magnetization decreased, which may be originated from the increased order degree and ferrimagnetic nature of L1{sub 0} CoPt nanoparticles. Interestingly, when the Au addition was more than 10 at.%, the coercivity decreased due to the decrease of the order degree.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effects of Au content on the structure and magnetic properties of L1{sub 0}-FePt nanoparticles synthesized by the sol–gel method

(FePt){sub 100−x}Au{sub x} (x=0, 5, 10, and 20) nanoparticles were synthesized by the sol–gel method, and effects of Au content on the structural and magnetic properties of samples were investigated. Au doping reduced the phase transition temperature from face-centered cubic (FCC) to face-centered tetragonal (FCT) structure. In addition, additive Au promotes the chemical ordering of L1{sub 0} FePt NPs and increases the grain size of L1{sub 0} FePt NPs. When Au content increased from 0 to 10 at%, the coercivity (H{sub c}) increased due to the increase in degree of ordering S and grain size of L1{sub 0} FePt NPs. By increasing the Au content to 20 at%, H{sub c} decreased. - Graphical abstract: (FePt){sub 100}Au{sub 0} NPs are the coexistence of FCT and FCC phases. However, no hints of FCC phase were found for the (FePt){sub 100−x}Au{sub x} NPs (x=5, 10 and 20), which indicates that addition of gold greatly promotes the FCC to FCT phase transition. - Highlights: • (FePt){sub 100−x}Au{sub x} (x=0, 5, 10 and 20) nanoparticles (NPs) were synthesized. • Au addition promotes the chemical ordering of L1{sub 0} FePt NPs. • Au addition reduces ordering temperature of L1{sub 0} FePt NPs from FCC to FCT phase. • (FePt){sub 90}Au{sub 10} NPs show a high coercivity of 9585 Oe at room temperature.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Enhanced magnetic behaviors of CoPt nanoparticles by addition of SiO{sub 2}

Equiatomic L1{sub 0} CoPt alloy nanoparticles (NPs) with various contents of SiO{sub 2} are synthesized by the simple sol–gel method. The SiO{sub 2} additions restrain the growth of grain and hinder the agglomeration formation. The coercivity increases first and then decreases with SiO{sub 2} addition. Compared to the 0 μl-SiO{sub 2} CoPt NPs, the higher ordering degree and better magnetic properties are obtained by the addition of amount 10 μl SiO{sub 2} in our sample. And the coercivity is two times as large as that of 0 μl-SiO{sub 2} NPs. When the addition of SiO{sub 2} is more than 10 μl, the deteriorated magnetic properties are ascribed to the transformation from hard magnetically phase to soft magnetically phase due to the decrease of particle size. - Graphical abstract: L1{sub 0} CoPt alloy nanoparticles with various contents of SiO{sub 2} are synthesized by sol–gel method. The effects of SiO{sub 2} on the structure and magnetic properties of CoPt nanoparticles are investigated. - Highlights: • The L1{sub 0} CoPt–SiO{sub 2} nanoparticles (NPs) were synthesized by sol–gel method. • Effects of SiO{sub 2} content on the structure and magnetic properties were investigated. • The addition of SiO{sub 2} restrained the growth of particle size. • CoPt–10 μl SiO{sub 2} NPs showed a higher ordering degree and better magnetic properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural and magnetic properties of the ordered FePt{sub 3}, FePt and Fe{sub 3}Pt nanoparticles

The Fe{sub x}Pt{sub 100−x} nanoparticles (NPs) with different nominal atomic rations (30≤x≤80) were synthesized at 700 °C by the sol–gel method. The structure, morphology and magnetic properties of the samples were investigated. When the Fe content in the Fe–Pt alloy NPs was 30 at%, FePt{sub 3} NPs were successfully synthesized. With the increase in Fe content up to 50 at%, it was found that the superlattice reflections (0 0 1) and (1 1 0) appeared, which indicated the formation of the L1{sub 0}-FePt phase. Meanwhile, the FePt{sub 3} fraction was reduced. When the Fe content increased to 60 at%, single-phase L1{sub 0}-FePt NPs were synthesized. The coercivity (Hc), saturation magnetization (Ms) and chemical order parameter S for Fe{sub 60}Pt{sub 40} NPs were as high as 10,200 Oe, 17.567 emu/g and 0.928, respectively. With the further increase of the Fe content to 80 at%, only Fe{sub 3}Pt phase existed and the Hc of the Fe{sub 3}Pt NPs decreased drastically to 360 Oe. - Graphical abstract: Fe{sub 3}Pt, FePt and FePt{sub 3} nanoparticles was obtained by sol–gel method. The effect of iron and platinum content on structural and magnetic properties of the FePt nanoparticles was investigated. Display Omitted - Highlights: • L1{sub 2}-FePt{sub 3}, L1{sub 0}-FePt and L1{sub 2}-Fe{sub 3}Pt NPs were synthesized by sol–gel method. • The chemical order parameter S affects the magnetic properties of the Fe–Pt alloy. • Structural and magnetic properties of the Fe–Pt alloy NPs were studied. • The synthetic route in this study will open up the possibilities of practical use.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A facile route to synthesis of CoPt magnetic nanoparticles

Graphical abstract: CoPt NPs are successfully synthesized by sol–gel method. Different distinct particle sizes with narrow particle size distribution of CoPt nanoparticles are obtained. The maximum coercivity of 254,720.3 A/m is obtained for 800 °C heat-treated sample. Display Omitted Highlights: ► L1{sub 0}-CoPt NPs with FCT structure are successfully synthesized by sol–gel method. ► The maximum value of 254,720.3 A/m is obtained for the samples heated at 800 °C. ► The synthetic route proposed in this study is less toxic and easy-to-handle. -- Abstract: The face-centered tetragonal (FCT) ordered L1{sub 0} CoPt nanoparticles (NPs) are prepared by the sol–gel method. Their structure and magnetic properties are characterized by the X-ray diffraction (XRD), the transmission electron microscope (TEM) and the vibrating sample magnetometer (VSM). The results indicate that the CoPt NPs heated at 400 °C are the disordered face-centered cubic (FCC) structure, whereas the samples annealed at the temperature above 600 °C exhibit an ordered FCT structure. TEM images show the increase of the particle size as the annealing temperature increases. SAED images show the appearance of the L1{sub 0} phase at 800 °C, and the maximum coercivity is 254,720.3 A/m.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Multifunctional Zn{sub 0.99-x}Mn{sub 0.01}Cu{sub x}S nanowires: Structure, luminescence and magnetism

The wurtzite-type Zn{sub 0.99-x}Mn{sub 0.01}Cu{sub x}S (x = 0, 0.003, 0.01) nanowires were prepared by a simple hydrothermal method at 180 {sup o}C. The structure and morphology of the samples were characterized by X-ray diffraction (XRD), X-ray absorption fine structure (XAFS), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), field emission scanning electron micrograph (FESEM) and X-ray photoelectron spectrum (XPS). The results showed that both the Mn{sup 2+} and Cu{sup 2+} ions substituted for the Zn{sup 2+} sites in the host ZnS. The ethylenediamine-mediated template was observed, which was used to explain the growth mechanism of the nanowires. The color-tunable emission can be obtained by adjusting the concentrations of Mn{sup 2+} and Cu{sup 2+} ions. The ferromagnetism was observed around room temperature.

36 MATERIALS SCIENCE↗

Electron Emission Observations from As-Grown and Vacuum-Coated Chemical Vapor Deposited Diamond

Field emission has been observed from chemical vapor deposited diamond grown on Mo and Si substrates. Emission was observed at fields as low as 20 kV/cm. The samples were tested in the as-grown form, and after coating with thin films of Au, CsI, and Ni. The emission current was typically maximum at the onset of the applied field, but was unstable, and decreased rapidly with time from the as-grown films. Thin Au layers, approximately 15 nm thick, vacuum deposited onto the diamond samples significantly improved the stability of the emission current at values approximately equal to those from uncoated samples at the onset of the applied field. Thin layers of CsI, approximately 5 nm thick, were also observed to improve the stability of the emission current but at values less than those from the uncoated samples at the onset of the applied field. While Au and CsI improved the stability of the emission, Ni was observed to have no effect.

Lamouri, A.↗

Effects of Surface Treatments on Secondary Electron Emission from CVD Diamond Films

Secondary electron emission (SEE) properties of polycrystalline diamond films grown by chemical vapor deposition (CVD) were measured. The total secondary yield (sigma) from as-grown samples was observed to be as high as 20 at room temperature and 48 while heating at 700 K in vacuum. Electron-beam-activated, alkali-terminated diamond films have shown stable values of sigma as high as 60 when coated with CsI and similarly high values when coated with other alkali halides. Diamond coated with BaF2 had a stable sigma of 6, but no enhancement of the SEE properties was observed with coatings of Ti or Au. Hydrogen was identified to give rise to this effect in as-grown films. However, electron beam exposure led to a reduction in sigma values as low as 2. Exposure to a molecular hydrogen environment restored sigma to its original value after degradation, and enabled stable secondary emission during electron beam exposure. Atomic hydrogen and hydrogen plasma treatments were performed on diamond/Mo samples in an attempt to increase the near-surface hydrogen concentration which might lead to increased stability in the secondary emission. Raman scattering analysis, scanning electron microscopy, and Auger electron spectroscopy (AES) confirmed that hydrogen plasma and atomic hydrogen treatments improved the quality of the CVD diamond significantly. Elastic recoil detection (ERD) showed that heating as-grown diamond targets to 7OO K, which was correlated with an increase in sigma, removed contaminants from the surface but did not drive hydrogen from the diamond bulk. ERD showed that the hydrogen plasma treatment produced an increase in the hydrogen concentration in the near-surface region which did not decrease while heating in vacuum at 700 K, but no improvement in the SEE properties was observed.

Mearini, G. T.↗