Engineering Papers⌕ Search

Engineering topics

Wang, Yanju

Publications and source records attributed to Wang, Yanju.

5 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Optimizing Vertical Crystallization for Efficient Perovskite Solar Cells by Buried Composite Layers

Planar-heterojunction perovskite solar cells (PSCs) have experienced rapid evolution in recent years because of the low-temperature processing, suitable alignment, and high mobility of the tin oxide buried contact layer. However, improper SnO 2 surface states and poor crystallinity of the top perovskite films are still the main obstacles for the planar PSCs in which performance always lags behind their mesoporous counterparts. Herein, a new buried contact is reported by introducing graphitic carbon nitride (g-C 3 N 4 ) into the commonly used SnO 2 which performs outstanding transmittance, conductivity, and surface states for a high-quality electron-transporting layer. Moreover, the vertical composition and crystallinity of the top perovskite film are manipulated by rich amino groups on the edge of the g-C 3 N 4 nanosheets which induce the prenucleation of the lead-rich species at the buried interface. Benefiting from the high-quality buried contacts and the optimized perovskite layers, the resultant PSCs achieve a champion efficiency of 21.5% with all photovoltaic parameters enhanced in comparison with their control counterparts (<20%).

planar-heterojunction perovskite solar cells↗
DOE OSTI2020

Structural and mechanical properties of magnesium aluminate nanoceramics under high pressure

Nanoceramics may have different structural and physical properties compared to their coarse-grained counterparts. Here, we report the high-pressure study of micro- and nano-crystalline MgAl2O4 in order to examine the effect of particle size on the structural stability. A reversible pressure-induced phase transition (cubic to tetragonal) is observed in MgAl2O4 nanocrystals under non-hydrostatic pressure at room temperature, in contrast to the previously reported structural transition of MgAl2O4 at high pressure and high temperature. It is also found that the compressed MgAl2O4 microcrystals do not fracture further below 60 nm, suggesting a plastic deformation mechanism transition. MgAl2O4 with a grain size above ∼60 nm exhibits normal cracking behaviors, but shows metal-like plastic deformation behaviors below this critical size. It is implied that combined ductility and strength can be achieved in nanoceramic MgAl2O4.

Xu, Jianing (ORCID:0000000325474344)↗
DOE OSTI2020

High-pressure strengthening in ultrafine-grained metals

The Hall–Petch relationship, according to which the strength of a metal increases as the grain size decreases, has been reported to break down at a critical grain size of around 10 to 15 nanometres. As the grain size decreases beyond this point, the dominant mechanism of deformation switches from a dislocation-mediated process to grain boundary sliding, leading to material softening. In one previous approach, stabilization of grain boundaries through relaxation and molybdenum segregation was used to prevent this softening effect in nickel–molybdenum alloys with grain sizes below 10 nanometres. Here we track in situ the yield stress and deformation texturing of pure nickel samples of various average grain sizes using a diamond anvil cell coupled with radial X-ray diffraction. Our high-pressure experiments reveal continuous strengthening in samples with grain sizes from 200 nanometres down to 3 nanometres, with the strengthening enhanced (rather than reduced) at grain sizes smaller than 20 nanometres. Here, we achieve a yield strength of approximately 4.2 gigapascals in our 3-nanometre-grain-size samples, ten times stronger than that of a commercial nickel material. A maximum flow stress of 10.2 gigapascals is obtained in nickel of grain size 3 nanometres for the pressure range studied here. We see similar patterns of compression strengthening in gold and palladium samples down to the smallest grain sizes. Simulations and transmission electron microscopy reveal that the high strength observed in nickel of grain size 3 nanometres is caused by the superposition of strengthening mechanisms: both partial and full dislocation hardening plus suppression of grain boundary plasticity. These insights contribute the ongoing search for ultrastrong metals via materials engineering.

36 MATERIALS SCIENCE↗