Engineering Papers⌕ Search

Engineering topics

Wang, Yangyang

Publications and source records attributed to Wang, Yangyang.

At least 73 records · Page 4

Study of segmental dynamics and ion transport in polymer–ceramic composite electrolytes by quasi-elastic neutron scattering

Composite electrolytes composed of a polymer electrolyte and an ion-conducting ceramic electrolyte are promising in fulfilling the requirements for a stable lithium metal anode. In this work, we identify the effects of the surface of a lithium-ion-conducting ceramic, the Ohara LICGC™ ceramic, on the segmental dynamics and ionic conductivity of polymer electrolyte consisting of poly(ethylene oxide) and lithium bis(trifluoromethanesulfonyl)imide (LiTFSI). Using quasi-elastic neutron scattering, we study the segmental motion of PEO chains under the confinement of LiTFSI salt and Ohara ceramic, in their melt state (363 K). We compare the relaxation time, τ, and the monomeric friction coefficient, ζ, of four samples: neat PEO, PEO + Ohara ceramic, PEO + LiTFSI and PEO + LiTFSI + Ohara ceramic. In the absence of LiTFSI, Ohara ceramic posed negligible change in the segmental dynamics of PEO. In contrast, with the presence of LiTFSI, Ohara ceramic slowed down the segmental motion of PEO chains by ~60% compared to neat PEO + LiTFSI. The intrinsic ionic conductivity of the polymer phase in the composite decreased by ~30% compared to the neat polymer electrolyte. The underpinnings of these results may be that polymer chains in the vicinity of the ceramic surface are less mobile due to coordination with surface bound lithium ions.

36 MATERIALS SCIENCE↗

Influence of side chain isomerism on the rigidity of poly(3-alkylthiophenes) in solutions revealed by neutron scattering

Here, using small-angle neutron scattering, we conducted a detailed conformational study of poly(3-alkylthiophene) solutions in deuterated dichlorobenzene. The focus was placed on addressing the influence of the spatial arrangement of side chain constituents on backbone conformation. We demonstrate that by introducing a branch point in the side chain, side chain steric interactions may promote torsional motion between backbone units, resulting in greater chain flexibility. Our findings highlight the key role of topological isomerism in determining the chain rigidity and throw new light on the debate about the effective approaches for optimizing the electronic properties of conducting polymers via side chain engineering.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Porous liquid zeolites: hydrogen bonding-stabilized H-ZSM-5 in branched ionic liquids

Porous liquids, as a newly emerging type of porous material, have great potential in gas separation and storage. However, the examples and synthetic strategies reported so far likely represent only the tip of the iceberg due to the great difficulty and challenge in engineering permanent porosity in liquid matrices. By taking advantage of the hydrogen bonding interaction between the alkane chains of branched ionic liquids and the Brønsted sites in H-form zeolites, as well as the mechanical bond of the long alkyl chain of the cation penetrated into the zeolite channel at the interface, the H-form zeolites can be uniformly stabilized in branched ionic liquids to form porous liquid zeolites, which not only significantly improve their gas sorption performance, but also change the gas sorption–desorption behavior because of the preserved permanent porosity. Furthermore, such a facile synthetic strategy can be extended to fabricate other types of H-form zeolite-based porous liquids by taking advantage of the tunability of the counter-anion (e.g., NTf 2 - , BF 4 - , EtSO 4 - , etc.) in branched ionic liquids, thus opening up new opportunities for porous liquids for specific applications in energy and environment.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Charge Transport in Imidazolium-Based Homo- and Triblock Poly(ionic liquid)s

Ion dynamics in a series of imidazolium-based triblock copolymers (triblock co-PILs) are investigated using broadband dielectric spectroscopy (BDS) and differential scanning calorimetry (DSC) and compared to their homopolymer counterparts (homo-PILs). Two calorimetric glass transition temperatures (T g ) are observed corresponding to the charged poly(ionic liquid) (PIL) blocks and noncharged polystyrene (PS) blocks. Varying the counterion from Br – to NTf 2 – decreases the T g of the charged block by over 50 °C, thereby increasing the room-temperature ionic dc conductivity by over 6 orders of magnitude. Interestingly, for a given anion, varying the volume fraction of the charged block, from ~0.5 to ~0.8, has very minimal effect on the dc ionic conductivity, indicating that the choice of counterion is the key factor influencing charge transport in these systems.

36 MATERIALS SCIENCE↗

Local elasticity in nonlinear rheology of interacting colloidal glasses revealed by neutron scattering and rheometry

The flow of colloidal suspensions is ubiquitous in nature and industry. Colloidal suspensions showcase a wide range of rheological behavior, which should be closely related to the microscopic structure of the systems. With in situ small-angle neutron scattering complemented by rheological measurements, we investigated the deformation behavior of a charge-stabilized colloidal glass at particle level undergoing steady shear. A short-lived, localized elastic response at particle level, termed as the transient elasticity zone (TEZ), was identified from the neutron spectra. The existence of the TEZ, which could be promoted by the electrostatic interparticle potential, is a signature of deformation heterogeneity: the body of fluids under shear behaves like an elastic solid within the spatial range of the TEZ but like fluid outside the TEZ. The size of the TEZ shrinks as the shear rate increases in the shear thinning region, which shows that the shear thinning is accompanied by a diminishing deformation heterogeneity. More interestingly, the TEZ is found to be the structural unit that provides the resistance to the imposed shear, as evidenced by the quantitative agreement between the local elastic stress sustained by the TEZ and the macroscopic stress from rheological measurements at low and moderate shear rates. Our findings indicate an understanding on the nonlinear rheology of interacting colloidal glasses from a micro-mechanical view.

36 MATERIALS SCIENCE↗

Polyamidoxime chain length drives emergent metal-binding phenomena

Emergence is complex behavior arising from the interactions of many simple constituents that do not display such behavior independently. Here, polyamidoxime (PAO) uranium adsorbents show such phenomena, as recent works articulate that the polymer binds uranium differently than the monomeric constituents. In order to investigate the origins of this emergent uranium-binding behavior, we synthesized a series of amidoxime polymers with low polydispersity and small molecules with lengths ranging from 1 to 125 repeat units. Following immersion in a uranyl-containing solution, the local, intermediate, and macroscopic structures were investigated by X-ray absorption fine structure (XAFS) spectroscopy, small angle neutron scattering (SANS), and dynamic light scattering (DLS). Fits of the extended XAFS (EXAFS) region revealed a progressive change in uranium coordination environment as a function of polymer molecular weight, identifying chain length as a driving force in emergent metal binding and resolving the controversy over how amidoxime adsorbents bind uranium.

36 MATERIALS SCIENCE↗

Scaling Behavior of Anisotropy Relaxation in Deformed Polymers

Drawing an analogy to the paradigm of quasielastic neutron scattering, we present a general approach for quantitatively investigating the spatiotemporal dependence of structural anisotropy relaxation in deformed polymers by using small-angle neutron scattering. Experiments and nonequilibrium molecular dynamics simulations on polymer melts over a wide range of molecular weights reveal that their conformational relaxation at relatively high momentum transfer Q and short time can be described by a simple scaling law, with the relaxation rate proportional to Q. Furthermore, this peculiar scaling behavior, which cannot be derived from the classical Rouse and tube models, is indicative of a surprisingly weak direct influence of entanglement on the microscopic mechanism of single-chain anisotropy relaxation.

42 ENGINEERING↗

Superstretchable, Self-Healing Polymeric Elastomers with Tunable Properties

Utilization of self-healing chemistry to develop synthetic polymer materials that can heal themselves with restored mechanical performance and functionality is of great interest. Self-healable polymer elastomers with tunable mechanical properties are especially attractive for a variety of applications. In this paper, a series of urea functionalized poly(dimethyl siloxane)-based elastomers (U-PDMS-Es) are reported with extremely high stretchability, self-healing mechanical properties, and recoverable gas-separation performance. Tailoring the molecular weights of poly(dimethyl siloxane) or weight ratio of elastic cross-linker offers tunable mechanical properties of the obtained U-PDMS-Es, such as ultimate elongation (from 984% to 5600%), Young's modulus, ultimate tensile strength, toughness, and elastic recovery. The U-PDMS-Es can serve as excellent acoustic and vibration damping materials over a broad range of temperature (over 100 °C). The strain-dependent elastic recovery behavior of U-PDMS-Es is also studied. After mechanical damage, the U-PDMS-Es can be healed in 120 min at ambient temperature or in 20 min at 40 °C with completely restored mechanical performance. Lastly, the U-PDMS-Es are also demonstrated to exhibit recoverable gas-separation functionality with retained permeability/selectivity after being damaged.

36 MATERIALS SCIENCE↗

Polymerized ionic liquids: Effects of counter-anions on ion conduction and polymerization kinetics

A novel imidazolium–containing monomer, 1–[ω–methacryloyloxydecyl]–3–(n–butyl)–imidazolium (1BDIMA), was synthesized and polymerized using free radical and controlled free radical polymerization followed by post–polymerization ion exchange with bromide (Br), tetrafluoroborate (BF 4 ), hexafluorophosphate (PF 6 ), or bis(trifluoromethylsulfonyl)imide (Tf 2 N). The thermal properties and ionic conductivity of the polymers showed a strong dependence on the counter–ions and had glass transition temperatures ( T g ) and ion conductivities at room temperature ranging from 10 °C to –42 °C and 2.09 × 10 –7 S cm –1 to 2.45 × 10 –5 S cm –1 . In particular, PILs with Tf 2 N counter–ions showed excellent ion conductivity of 2.45 × 10 –5 S cm –1 at room temperature without additional ionic liquids (ILs) being added to the system, making them suitable for further study as electro–responsive materials. In addition to the counter–ions, solvent was found to have a significant effect on the reversible addition–fragmentation chain–transfer polymerization (RAFT) for 1BDIMA with different counter–ions. For example, 1BDIMATf2N would not polymerize in acetonitrile (MeCN) at 65 °C and only achieved low monomer conversion (< 5%) at 75 °C. However, 1BDIMA–Tf 2 N proceeded to high conversion in dimethylformamide (DMF) at 65 °C and 1BDIMABr polymerized significantly faster in DMF compared to MeCN. NMR diffusometry was used to investigate the kinetic differences by probing the diffusion coefficients for each monomer and counter–ion in MeCN and DMF. Furthermore, these results indicate that the reaction rates are not diffusion limited, and point to a need for deeper understanding of the role electrostatics plays in the kinetics of free radical polymerizations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Strain heterogeneity in sheared colloids revealed by neutron scattering

Recent computational and theoretical studies have shown that the deformation of colloidal suspensions under a steady shear is highly heterogeneous at the particle level and demonstrate a critical influence on the macroscopic deformation behavior. Despite its relevance to a wide variety of industrial applications of colloidal suspensions, scattering studies focusing on addressing the heterogeneity of the non-equilibrium colloidal structure are scarce thus far. Here in this paper, we report the first experimental result using small-angle neutron scattering. From the evolution of strain heterogeneity, we conclude that the shear-induced deformation transforms from nearly affine behavior at low shear rates, to plastic rearrangements when the shear rate is high.

36 MATERIALS SCIENCE↗

Molecular Dynamics Investigation of the Relaxation Mechanism of Entangled Polymers after a Large Step Deformation

The chain retraction hypothesis of the tube model for nonlinear polymer rheology has been challenged by the recent small-angle neutron scattering (SANS) experiment. In this study, we further examine the microscopic relaxation mechanism of entangled polymer melts after a large step uniaxial extension by using large-scale molecular dynamics simulation. We show that the unique structural features associated with the chain retraction mechanism of the tube model are absent in our simulations, in agreement with the previous experimental results. In contrast to SANS experiments, molecular dynamics simulations allow us to accurately and unambiguously determine the evolution of the radius of gyration tensor of a long polymer chain after a large step deformation. Contrary to the prediction of the tube model, our simulations reveal that the radius of gyration in the perpendicular direction to stretching increases monotonically toward its equilibrium value throughout the stress relaxation. These results provide a critical step in improving our understanding of nonlinear rheology of entangled polymers.

36 MATERIALS SCIENCE↗

Reconstruction of three-dimensional anisotropic structure from small-angle scattering experiments

When subjected to flow, the structures of many soft-matter systems become anisotropic due to the symmetry breaking of the spatial arrangements of constituent particles at the microscopic level. At present, it is common practice to use various small-angle scattering techniques to explore flow-induced microstructural distortion. However, there has not been a thorough discussion in the literature on how a three-dimensional anisotropic structure can be faithfully reconstructed from two-dimensional small-angle scattering spectra. Here, in this work, we address this issue rigorously from a mathematical perspective by using real spherical harmonic expansion analysis. We first show that, except for cases in which mechanical perturbation is sufficiently small, the existing small-angle scattering techniques generally do not provide complete information on structural distortion. This limitation is caused by the linear dependence of certain real spherical harmonic basis vectors on the flow-vorticity and flow-velocity gradient planes in the Couette shear cell. To circumvent the constraint imposed by this geometry, an alternative approach is proposed in which a parallel sliding plate shear cell is used with a central rotary axis along the flow direction. Finally, from the calculation of rotation of the reference frame, we demonstrate the feasibility of this experimental implementation for a fully resolved three-dimensional anisotropic structure via a case study of sheared polymers.

36 MATERIALS SCIENCE↗

All acrylic-based thermoplastic elastomers with high upper service temperature and superior mechanical properties

All acrylic-based thermoplastic elastomers (TPEs) offer potential alternatives to the widely-used styrenic TPEs. However, the high entanglement molecular weight ( M e ) of polyacrylates, as compared to polydienes, leads to “disappointing” mechanical performance as compared to styrenic TPEs. In this study, triblock copolymers composed of alkyl acrylates with different pendant groups and different glass transition temperatures ( T g s), i.e. 1-adamatyl acrylate (AdA) and tetrahydrofurfuryl acrylate (THFA), were synthesized via reversible addition–fragmentation chain transfer (RAFT) polymerization. Thermal characterization of the resulting polymers was performed using differential scanning calorimetry (DSC), and the T g s of both segments were observed for the block copolymers. This indication of microphase separation behavior was further demonstrated using atomic-force microscopy (AFM) and small angle X-ray scattering (SAXS). Dynamic mechanical analysis (DMA) showed that the softening temperature of the PAdA domains is 123 °C, which is higher than that of both styrenic TPEs and commercial acrylic based TPEs with poly(methyl methacrylate) (PMMA) hard block. Here, the resulting triblock copolymers also exhibited stress–strain behavior superior to that of conventional all acrylic-based TPEs composed of PMMA and poly( n -butyl acrylate) (PBA) made by controlled radical processes, while the tensile strength was lower than for products made by living anionic polymerization.

36 MATERIALS SCIENCE↗