Engineering topics
Wang, Y
Publications and source records attributed to Wang, Y.
EFFECTS OF PERPENDICULAR DIFFUSION ON ENERGETIC PARTICLES ACCELERATED BY THE INTERPLANETARY CORONAL MASS EJECTION SHOCK
In this work, based on a numerical solution of the focused transport equation, we obtained the intensity and anisotropy time profiles of solar energetic particles (SEPs) accelerated by an interplanetary shock in the three-dimensional Parker magnetic field. The shock is treated as a moving source of energetic particles with an assumed particle distribution function. We computed the time profiles of particle flux and anisotropy as measured by an observer at 1 AU, equatorial plane, and various longitudes with respect to the shock propagation direction. With perpendicular diffusion, energetic particles can cross magnetic field lines. Particles may be detected before the observer's field line is connected to the shock. After the observer's field line breaks from the shock front, the observer still can see more particles are injected into its field line. Our simulations show that the particle onset time, peak time, peak intensity, decay rate, and duration of SEP event could be significantly influenced by the effect of perpendicular diffusion. The anisotropy with perpendicular diffusion is almost the same as that without perpendicular diffusion, but there is an obvious difference at the moment when the observer's field line begins to be connected to the shock.
First-principles calculations of interfacial and segregation energies in alpha-Cr2O3
Explore the source record for details and available documents.
Nano {gamma}'/{gamma}'' composite precipitates in Alloy 718
Nanoscale composite precipitates of Alloy 718 have been investigated with both high-resolution scanning transmission electron microscopy and phase field modeling. Chemical analysis via energy-dispersive x-ray spectroscopy allowed for the differentiation of {gamma}' and {gamma}'' particles, which is not otherwise possible through traditional Z-contrast methods. Phase field modeling was applied to determine the stress distribution and elastic interaction around and between the particles, respectively, and it was determined that a composite particle (of both {gamma}' and {gamma}'') has an elastic energy that is significantly lower than, for example, single {gamma}' and {gamma}'' precipitates which are non-interacting.
The thermal equation of state of FeTiO[subacript 3] ilmenite based on in situ X-ray diffraction at high pressures and temperatures
Abstract not provided
Density and Sound Velocity of Iron-Sulfur Alloying Liquids at High Pressures and Implications to Planetary Cores
Liquid Fe-light element alloys are likely present in the Earth's outer core and the cores (or outer cores) of other terrestrial planets such as Moon, Mercury, and Mars, suggested by geophysical and geochemical observations. In order to determine the abundances of light elements and their effects on the structure, dynamics, and evolution of planetary cores, it is crucial to determine the equation of state for Fe-light element alloying liquids under core conditions. However, density data on liquid Fe-light element alloys at core pressures are very limited and no sound velocity or bulk modulus data are available for these liquids at high pressures. This makes it difficult to extrapolate the equation of state to core pressures. As a result, density data on solid Fe alloys are often used in the literature to compare with seismological observations by making rough corrections for the volume of melting. In this study, we determine the density and sound velocity for Fe-S liquids with different sulfur contents at high pressure and temperature conditions up to 8 GPa and 2173 K using synchrotron X-ray techniques.
VARIATIONS OF SOLAR ELECTRON AND PROTON FLUX IN MAGNETIC CLOUD BOUNDARY LAYERS AND COMPARISONS WITH THOSE ACROSS THE SHOCKS AND IN THE RECONNECTION EXHAUSTS
The magnetic cloud boundary layer (BL) is a dynamic region formed by the interaction of the magnetic cloud (MC) and the ambient solar wind. In the present study, we comparatively investigate the proton and electron mean flux variations in the BL, in the interplanetary reconnection exhaust (RE), and across the MC-driven shock by using the Wind data from 1995 to 2006. In general, the proton flux has higher increments at lower energy bands compared with the ambient solar wind. Inside the BL, the core electron flux increases quasi-isotropically and the increments decrease monotonously with energy from {approx}30% (at 18 eV) to {approx}10% (at 70 eV); the suprathermal electron flux usually increases in either parallel or antiparallel direction; the correlation coefficient of electron flux variations in parallel and antiparallel directions changes sharply from {approx}0.8 below 70 eV to {approx}0 above 70 eV. Similar results are also found for RE. However, different phenomena are found across the shock where the electron flux variations first increase and then decrease with a peak increment (>200%) near 100 eV. The correlation coefficient of electron flux variations in parallel and antiparallel directions is always around 0.8. The similar behavior of flux variations in BL and RE suggests that reconnection may commonly occur in BL. Our work also implies that the strong energy dependence and direction selectivity of electron flux variations, which were previously thought to have not enough relevance to magnetic reconnection, could be considered as an important signature of solar wind reconnection in the statistical point of view.
Chemical Convention in the Lunar Core from Melting Experiments on the Ironsulfur System
By reanalyzing Apollo lunar seismograms using array-processing methods, a recent study suggests that the Moon has a solid inner core and a fluid outer core, much like the Earth. The volume fraction of the lunar inner core is 38%, compared with 4% for the Earth. The pressure at the Moon's core-mantle boundary is 4.8 GPa, and that at the ICB is 5.2 GPa. The partially molten state of the lunar core provides constraints on the thermal and chemical states of the Moon: The temperature at the inner core boundary (ICB) corresponds to the liquidus of the outer core composition, and the mass fraction of the solid core allows us to infer the bulk composition of the core from an estimated thermal profile. Moreover, knowledge on the extent of core solidification can be used to evaluate the role of chemical convection in the origin of early lunar core dynamo. Sulfur is considered an antifreeze component in the lunar core. Here we investigate the melting behavior of the Fe-S system at the pressure conditions of the lunar core, using the multi-anvil apparatus and synchrotron and laboratory-based analytical methods. Our goal is to understand compositionally driven convection in the lunar core and assess its role in generating an internal magnetic field in the early history of the Moon.
THE FERMI BUBBLE AS A SOURCE OF COSMIC RAYS IN THE ENERGY RANGE >10{sup 15} eV
The Fermi Large Area Telescope has recently discovered two giant gamma-ray bubbles that extend north and south of the Galactic center with diameters and heights of the order of H {approx} 10 kpc. We suggest that the periodic star capture processes by the Galactic supermassive black hole Sgr A*, with a capture rate of {tau}{sup -1}{sub cap} {approx} 3 Multiplication-Sign 10{sup -5} yr{sup -1} and an energy release of W {approx} 3 Multiplication-Sign 10{sup 52} erg per capture, can result in hot plasma injecting into the Galactic halo at a wind velocity of u {approx} 10{sup 8} cm s{sup -1}. The periodic injection of hot plasma can produce a series of shocks. Energetic protons in the bubble are re-accelerated when they interact with these shocks. We show that for energy larger than E > 10{sup 15} eV, the acceleration process can be better described by the stochastic second-order Fermi acceleration. We propose that hadronic cosmic rays (CRs) within the 'knee' of the observed CR spectrum are produced by Galactic supernova remnants distributed in the Galactic disk. Re-acceleration of these particles in the Fermi Bubble produces CRs beyond the knee. With a mean CR diffusion coefficient in this energy range in the bubble D{sub B} {approx} 3 Multiplication-Sign 10{sup 30} cm{sup 2} s{sup -1}, we can reproduce the spectral index of the spectrum beyond the knee and within it. The conversion efficiency from shock energy of the bubble into CR energy is about 10%. This model provides a natural explanation of the observed CR flux, spectral indices, and matching of spectra at the knee.
AGE SPREAD IN W3 MAIN: LARGE BINOCULAR TELESCOPE/LUCI NEAR-INFRARED SPECTROSCOPY OF THE MASSIVE STELLAR CONTENT
We present near-infrared multi-object spectroscopy and JHK{sub s} imaging of the massive stellar content of the Galactic star-forming region W3 Main, obtained with LUCI at the Large Binocular Telescope. We confirm 15 OB stars in W3 Main and derive spectral types between O5V and B4V from their absorption line spectra. Three massive young stellar objects are identified by their emission line spectra and near-infrared excess. The color-color diagram of the detected sources allows a detailed investigation of the slope of the near-infrared extinction law toward W3 Main. Analysis of the Hertzsprung-Russell diagram suggests that the Nishiyama extinction law fits the stellar population of W3 Main best (E(J - H)/E(H - K{sub s}) = 1.76 and R{sub K{sub s}} = 1.44). From our spectrophotometric analysis of the massive stars and the nature of their surrounding H II regions, we derive the evolutionary sequence of W3 Main and we find evidence of an age spread of at least 2-3 Myr. While the most massive star (IRS2) is already evolved, indications for high-mass pre-main-sequence evolution are found for another star (IRS N1), deeply embedded in an ultracompact H II (UCH II) region, in line with the different evolutionary phases observed in the corresponding H II regions. We derive a stellar mass of W3 Main of (4 {+-} 1) Multiplication-Sign 10{sup 3} M{sub Sun} by extrapolating from the number of OB stars using a Kroupa initial mass function and correcting for our spectroscopic incompleteness. We have detected the photospheres of OB stars from the more evolved diffuse H II region to the much younger UCH II regions, suggesting that these stars have finished their formation and cleared away their circumstellar disks very fast. Only in the hyper-compact H II region (IRS5) do the early-type stars seem to be still surrounded by circumstellar material.
Thermal Equation of State of CaIrO3 Post-perovskite
The pressure-volume-temperature (P-V-T) relation of CaIrO{sub 3} post-perovskite (ppv) was measured at pressures and temperatures up to 8.6 GPa and 1,273 K, respectively, with energy-dispersive synchrotron X-ray diffraction using a DIA-type, cubic-anvil apparatus (SAM85). Unit-cell dimensions were derived from the Le Bail full profile refinement technique, and the results were fitted using the third-order Birth-Murnaghan equation of state. The derived bulk modulus K{sub T0} at ambient pressure and temperature is 168.3 {+-} 7.1 GPa with a pressure derivative K{sub T0} = 5.4 {+-} 0.7. All of the high temperature data, combined with previous experimental data, are fitted using the high-temperature Birch-Murnaghan equation of state, the thermal pressure approach, and the Mie-Grueneisen-Debye formalism. The refined thermoelastic parameters for CaIrO{sub 3} ppv are: temperature derivative of bulk modulus ({partial_derivative}K{sub T}/{partial_derivative}T){sub P} = -0.038 {+-} 0.011 GPa K{sup -1}, {alpha}K{sub T} = 0.0039 {+-} 0.0001 GPa K{sup -1}, ({partial_derivative}K{sub T}/{partial_derivative}T){sub V} = -0.012 {+-} 0.002 GPa K{sup -1}, and ({partial_derivative}{sup 2}P/{partial_derivative}T{sup 2}){sub V} = 1.9 {+-} 0.3 x 10{sup -6} GPa{sup 2} K{sup -2}. Using the Mie-Grueneisen-Debye formalism, we obtain Grueneisen parameter {gamma}{sub 0} = 0.92 {+-} 0.01 and its volume dependence q = 3.4 {+-} 0.6. The systematic variation of bulk moduli for several oxide post-perovskites can be described approximately by the relationship K{sub T0} = 5406.0/V(molar) + 5.9 GPa.
The Structural Basis for the Function of Two Anti-VEGF Receptor 2 Antibodies
The anti-VEGF receptor 2 antibody IMC-1121B is a promising antiangiogenic drug being tested for treatment of breast and gastric cancer. We have determined the structure of the 1121B Fab fragment in complex with domain 3 of VEGFR2, as well as the structure of a different neutralizing anti-VEGFR2 antibody, 6.64, also in complex with VEGFR2 domain 3. The two Fab fragments bind at opposite ends of VEGFR2 domain 3; 1121B directly blocks VEGF binding, whereas 6.64 may prevent receptor dimerization by perturbing the domain 3:domain 4 interface. Mutagenesis reveals that residues essential for VEGF, 1121B, and 6.64 binding are nonoverlapping among the three contact patches.
The E2 Domains of APP and APLP1 Share a Conserved Mode of Dimerization
Amyloid precursor protein (APP) is genetically linked to Alzheimer's disease. APP is a type I membrane protein, and its oligomeric structure is potentially important because this property may play a role in its function or affect the processing of the precursor by the secretases to generate amyloid {beta}-peptide. Several independent studies have shown that APP can form dimers in the cell, but how it dimerizes remains controversial. At least three regions of the precursor, including a centrally located and conserved domain called E2, have been proposed to contribute to dimerization. Here we report two new crystal structures of E2, one from APP and the other from APLP1, a mammalian APP homologue. Comparison with an earlier APP structure, which was determined in a different space group, shows that the E2 domains share a conserved and antiparallel mode of dimerization. Biophysical measurements in solution show that heparin binding induces E2 dimerization. The 2.1 {angstrom} resolution electron density map also reveals phosphate ions that are bound to the protein surface. Mutational analysis shows that protein residues interacting with the phosphate ions are also involved in heparin binding. The locations of two of these residues, Arg-369 and His-433, at the dimeric interface suggest a mechanism for heparin-induced protein dimerization.
Effects of La2O3 on the Mixed Higher Alcohols Synthesis from Syngas over Co Catalysts: A Combined Theoretical and Experimental Study
The promoting role of lanthanum oxide (La{sub 2}O{sub 3}) in the catalytic synthesis of mixed higher (C{sub 2}-C{sub 6}) alcohols from syngas on Co-based catalysts was investigated using a combination of in situ and ex situ X-ray diffraction (XRD), photoelectron spectroscopy (XPS), catalyst reactivity performance studies, and ab initio molecular dynamics (AIMD) simulations. XRD measurements show that doping with La (0.5 wt %) onto activated carbon (AC) supported Co catalyst enhances the Co{sub 2}C phase formation, whereas the Co{sub 2}C phase formation is largely suppressed on alumina supported Co catalyst. A strong correlation of the selectivity toward alcohols with the ratio of Co{sub 2}C/Co particles present in the catalysts was observed. AIMD simulations suggest that on AC supports La exists as an oxide phase in the form of small clusters in the vicinity of Co particles. It was found that Co{sub 2}C formation is energetically favorable, especially for smaller Co particles because of the formation of surface carbide. Theoretical mechanistic studies indicate that oxygenated hydrocarbons can be formed on these catalysts by multiple routes involving the formation of CH{sub x}O and CH{sub x}CO species at the interface between the La{sub 2}O{sub 3} phase and Co/Co{sub 2}C. A detailed comparison with previous findings in the literature as well as discussion of the implications of these results upon the improvement of the selectivity of these catalysts toward higher alcohols is presented.
Graphene Nanosheets and Shear Flow Induced Crystallization in Isotactic Polypropylene Nanocomposites
Combined effects of graphene nanosheets (GNSs) and shear flow on the crystallization behavior of isotactic polypropylene (iPP) were investigated by in-situ synchrotron wide-angle X-ray diffraction (WAXD) and small-angle X-ray scattering (SAXS) techniques. For crystallization under quiescent condition (at 145 C), the half-crystallization time (t{sub 1/2}) of nanocomposites containing 0.05 and 0.1 wt % GNSs was reduced to at least 50% compared to that of neat iPP, indicating the high nucleation ability of GNSs. The crystallization rate of iPP was directly proportional to the GNS content. Under a relatively weak shear flow (at a rate of 20 s{sup -1} for 5 s duration) and a low degree of supercooling, the neat iPP exhibited an isotropic structure due to the relaxation of row nuclei. However, visible antisotropic crystals appeared in sheared iPP/GNSs nanocomposites, indicating that GNSs induced a network structure hindering the mobility of iPP chains and allowing the survival of oriented row nuclei for a long period of time. The presence of GNSs clearly enhanced the effects of shear-induced nucleation as well as orientation of iPP crystals. Two kinds of nucleating origins coexisted in the sheared nanocomposite melt: heterogeneous nucleating sites initiated by GNSs and homogeneous nucleating sites (row nuclei) induced by shear. The difference of t{sub 1/2} of nanocomposites with and without shear was significantly larger than that of neat iPP. The presence of GNSs and shear flow exhibited a synergistic interaction on promoting crystallization kinetics of iPP, although the effect of GNS concentration was not apparent. From WAXD results of isothermal and nonisothermal crystallization of sheared iPP, it was found that the appearance of {beta}-crystals depended on the preservation of row nuclei, where the {alpha}-crystals were predominant in the iPP/GNSs nanocomposites, indicating that GNSs could directly induce {alpha}-crystals of iPP.