Engineering Papers⌕ Search

Engineering topics

Wang, Y.

Publications and source records attributed to Wang, Y..

At least 163 records · Page 9

GRB 081024B and GRB 140402A: Two Additional Short GRBs from Binary Neutron Star Mergers

Theoretical and observational evidences for a two-fold classification of short bursts have been recently obtained: (1) short gamma-ray flashes (S-GRFs), with isotropic energy E{sub iso}<10{sup 52} erg and no black hole (BH) formation, and (2) authentic short gamma-ray bursts (S-GRBs), with isotropic energy E{sub iso}>10{sup 52} erg showing evidence of BH formation in the binary neutron star merging process. The signature for BH formation is the onset of high-energy (0.1–100 GeV) emission, coeval to the prompt emission, in all S-GRBs. No GeV emission is expected nor observed in S-GRFs. In this paper, we present two S-GRBs, GRB 081024B and GRB 140402A, in addition to the already identified S-GRBs, GRB 090227B, GRB 090510, and GRB 140619B. We also return to the absence of GeV emission in the S-GRB 090227B, at an angle of 71{sup ∘} from the Fermi-LAT boresight. All of the correctly identified S-GRBs correlate with high-energy emission, implying no significant presence of beaming in GeV emission. The existence of a common power-law behavior in the GeV luminosities, following the BH formation, when measured in the source rest frame, points to a commonality in the mass and spin of the newly formed BHs in all S-GRBs.

79 ASTRONOMY AND ASTROPHYSICS↗

Comparing the Pressure-Induced Structural Behavior of CuCr 2 O 4 and CuCr 2 Se 4 Spinels

We have conducted high-pressure measurements on the CuCr 2 O 4 and CuCr 2 Se 4 spinels to unravel the structural systematics of these materials under compression. Our studies have revealed diverse structural behavior in these two compounds. In particular, CuCr 2 O 4 retains its ambient-pressure I4 1 /amd structure up to 50 GPa. Close inspection of the lattice and interatomic parameters reveals a compressibility change near 23 GPa, which is accompanied by an expansion of the apical Cr–O bond distances. We speculate that an outer Cr 3+ 3d orbital reorientation might be at play in this system, manifesting as the change in compressibility at that pressure point. On the other hand, CuCr 2 Se 4 undergoes a structural transformation from the starting Fd3¯m phase toward a monoclinic structure initiated at ~8 GPa and completed at ~20 GPa. Furthermore, this high-pressure behavior resembles that of ZnCr 2 Se 4 , and it appears that, unlike similar chalcogenide Cr spinels, steric effects take a leading role in this pressure-induced Fd3¯m → monoclinic transition. Close comparison of our results with the reported literature yields significant insights behind the pressure-induced structural systematics of this important family of materials, thus both allowing for the careful manipulation of the structural/physical properties of these systems by strain and promoting our understanding of similar pressure-induced effects in relevant systems.

36 MATERIALS SCIENCE↗

Tipping the magnetic instability in paramagnetic S r 3 R u 2 O 7 by Fe impurities [Tipping the magnetic instability in paramagnetic S r 3 R u 2 O 7 by modest Fe substitution]

We report the magnetic and electronic properties of the bilayer ruthenate Sr 3 Ru 2 O 7 upon Fe substitution for Ru. We find that Sr 3 (Ru 1-x Fe x ) 2 O 7 shows spin-glass-like phase below 4 K for x = 0.01 and commensurate E-type antiferromagnetically ordered insulating ground state characterized by the propagation vector q c = (0.25 0.25 0) for x ≥ 0.03, in contrast to the paramagnetic metallic state in the parent compound with strong spin fluctuations occurring at wave vectors q = (0.09 0 0) and (0.25 0 0). The observed antiferromagnetic ordering is quasitwo-dimensional with very short correlation length along the c axis, a feature similar to the Mndoped Sr 3 Ru 2 O 7 . Lastly, our results suggest that this ordered ground state is associated with the intrinsic magnetic instability in the pristine compound, which can be readily tipped by the local magnetic coupling between the 3d orbitals of the magnetic dopants and Ru 4d orbitals.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A positive correlation between energetic electron butterfly distributions and magnetosonic waves in the radiation belt slot region

Energetic (hundreds of keV) electrons in the radiation belt slot region have been found to exhibit the butterfly pitch angle distributions. Resonant interactions with magnetosonic and whistler-mode waves are two potential mechanisms for the formation of these peculiar distributions. Here we perform a statistical study of energetic electron pitch angle distribution characteristics measured by Van Allen Probes in the slot region during a three-year period from May 2013 to May 2016. Our results show that electron butterfly distributions are closely related to magnetosonic waves rather than to whistlermode waves. Both electron butterfly distributions and magnetosonic waves occur more frequently at the geomagnetically active times than at the quiet times. In a statistical sense, more distinct butterfly distributions usually correspond to magnetosonic waves with larger amplitudes and vice versa. The averaged magnetosonic wave amplitude is less than 5 pT in the case of normal and flat-top distributions with a butterfly index BI = 1 but reaches ~ 35–95 pT in the case of distinct butterfly distributions with BI > 1:3. For magnetosonic waves with amplitudes > 50 pT, the occurrence rate of butterfly distribution is above 80%. Our study suggests that energetic electron butterfly distributions in the slot region are primarily caused by magnetosonic waves.

79 ASTRONOMY AND ASTROPHYSICS↗

Performance of beryllium targets with full-scale capsules in low-fill 6.72-mm hohlraums on the National Ignition Facility

When used with 1.06-mm beryllium (Be) capsules on the National Ignition Facility, gold hohlraums with the inner diameter of 5.75 mm and helium gas fill density of 1.6 mg/cm 3 exhibit significant drive degradation due to laser energy backscatter (of order 14%–17%) and “missing” X-ray drive energy (about 32% during the main pulse). Also, hard to simulate cross-beam energy transfer (CBET) must be used to control the implosion symmetry. Larger, 6.72-mm hohlraums with fill densities ≤0.6 mg/cm 3 generally offer improved drive efficiency, reduced hot-electron preheat, and better control of the implosion symmetry without CBET. Recently, we carried out an exploratory campaign to evaluate performance of 1.06-mm Be capsules in such hohlraums and determine optimal hohlraum parameters. Specifically, we performed in this paper a hohlraum fill-density scan with a three-shock, 9.5-ns laser pulse and found that an appropriate axial laser repointing and azimuthal outer-quad splitting resulted in significantly improved hohlraum energetics at fill densities ≤0.3 mg/cm 3 (with backscattered and “missing” energies being of about 5% and 23% of the total laser energy, respectively). The capsule shape at stagnation was slightly oblate and improved with lowering the fill density. We also performed an implosion with a lower-picket, 12.6-ns pulse at the hohlraum fill density of 0.15 mg/cm 3 to observe comparable hohlraum energetics (about 3% of backscattered and 27% of “missing” energy) but an even more oblate implosion shape. Finally, achieving symmetric implosions of 1.06-mm Be capsules in low-fill, 6.72-mm gold hohlraums with reasonably low-adiabat pulses may not be feasible. However, symmetric implosions have recently been successfully demonstrated in such hohlraums with 0.8-mm Be capsules.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Surface and interface of epitaxial CdTe film on CdS buffered van der Waals mica substrate

We report single crystal CdTe films are desirable for optoelectronic device applications. An important strategy of creating films with high crystallinity is through epitaxial growth on a proper single crystal substrate. We report the metalorganic chemical vapor deposition of epitaxial CdTe films on the CdS/mica substrate. The epitaxial CdS film was grown on a mica surface by thermal evaporation. Due to the weak van der Waals forces, epitaxy is achieved despite the very large interface lattice mismatch between CdS and mica (~21–55%). The surface morphology of mica, CdS and CdTe were quantified by atomic force microscopy. The near surface structures, orientations and texture of CdTe and CdS films were characterized by the unique reflection high-energy electron diffraction surface pole figure technique. The interfaces of CdTe and CdS films and mica were characterized by X-ray pole figure technique and transmission electron microscopy. The out-of-plane and in-plane epitaxy of the heteroepitaxial films stack are determined to be CdTe(111)//CdS(0001)//mica(001) and [$\overline{1}2\overline{1}$] CdTe //[$\overline{1}100$] CdS //[010] mica , respectively. The measured photoluminescence (PL), time resolved PL, photoresponse, and Hall mobility of the CdTe/CdS/mica indicate quality films. Finally, the use of van der Waals surface to grow epitaxial CdTe/CdS films offers an alternative strategy towards infrared imaging and solar cell applications.

36 MATERIALS SCIENCE↗

Quantum behavior of water nano-confined in beryl

The proton mean kinetic energy, Ke(H), of water confined in nanocavities of beryl (Be 3 Al 2 Si 6 O 18 ) at 5 K was obtained by simulating the partial vibrational density of states from density functional theory based first-principles calculations. The result, Ke(H) = 104.4 meV, is in remarkable agreement with the 5 K deep inelastic neutron scattering (DINS) measured value of 105 meV. This is in fact the first successful calculation that reproduces an anomalous DINS value regarding Ke(H) in nano-confined water. The calculation indicates that the vibrational states of the proton of the nano-confined water molecule distribute much differently than in ordinary H 2 O phases, most probably due to coupling with lattice modes of the hosting beryl nano-cage. These findings may be viewed as a promising step towards the resolution of the DINS controversial measurements on other H 2 O nano-confining systems, e.g., H 2 O confined in single and double walled carbon nanotubes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

MMS Observation of Inverse Energy Dispersion in Shock Drift Accelerated Ions

The four Magnetospheric Multiscale (MMS) spacecraft observed a ∼1 min burst of energetic ions (50–1000 keV) in the region upstream from the subsolar quasi-perpendicular bow shock on 6 December 2015. The composition, flux levels, and spectral indices of these energetic protons, helium, and oxygen ions greatly resemble those seen in the outer magnetosphere earlier while MMS crossed the magnetopause and differ significantly from those simultaneously observed far upstream by Advanced Composition Explorer (ACE). However, the event cannot be explained solely in terms of leakage from the magnetosphere. The strongly southward orientation of the interplanetary magnetic field (IMF) lines at the time of the event precludes any connection to the magnetosphere. This point is confirmed by the presence of energetic electrons, known to occur on magnetic field lines that graze the bow shock rather than connect to the magnetosphere. We suggest that the ions gradient drifted out of the nearby quasi-parallel foreshock and into the quasi-perpendicular bow shock. Each of the ion species exhibited an inverse energy dispersion. As predicted by models for shock drift acceleration, the energies of the ions increased as 𝜃(sub Bn), the angle between the IMF and the shock normal, increased. Finally, we note that a similar event was observed a few minutes later in the subsolar magnetosheath, indicating that such events can be swept downstream of the bow shock.

Lee, S. H.↗

Development of shashlik electromagnetic calorimeter prototype for SoLID

A shashlik electromagnetic calorimeter will be produced in Hall A of Jefferson Laboratory for Solenoidal large Intensity Device (SoLID) to measure the energy deposition of electrons and hadrons, and to provide particle identification after the energy of the accelerator was upgraded to 12 GeV. Tsinghua University is the member of Hall A collaboration in charge of development and production of the large shashlik electromagnetic calorimeter of SoLID. One module of that calorimeter is composed by 194 layers. Each layer consists of a 1.5 mm thick plastic scintillator put on top of a 0.5 mm thick lead plate. Scintillation light is read out by wave-length shifter fibers penetrating through the calorimeter modules longitudinally along the direction of flight of the impact particle. This paper describes the design and construction of that module, as well as a few optimization studies meant to improve its performance. A detailed Geant4 simulation also shows that an energy resolution of 5%/√ E (GeV) and a good containment for electromagnetic showers can be achieved, as well as some basic electron identification. In conclusion, a prototype of that module will be tested soon with an electron beam at JLab.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Feasibility study of SiGHT: a novel ultra low background photosensor for low temperature operation

Rare event search experiments, such as those searching for dark matter and observations of neutrinoless double beta decay, require ultra low levels of radioactive background for unmistakable identification. In order to reduce the radioactive background of detectors used in these types of event searches, low background photosensors are required, as the physical size of these detectors become increasing larger, and hence the number of such photosensors used also increases rapidly. Considering that most dark matter and neutrinoless double beta decay experiments are turning towards using noble liquids as the target choice, liquid xenon and liquid argon for instance, photosensors that can work well at cryogenic temperatures are required, 165 K and 87 K for liquid xenon and liquid argon, respectively. The Silicon Geiger Hybrid Tube (SiGHT) is a novel photosensor designed specifically for use in ultra low background experiments operating at cryogenic temperatures. It is based on the proven photocathode plus silicon photomultiplier (SiPM) hybrid technology and consists of very few other, but also ultra radio-pure, materials like fused silica and silicon for the SiPM. Lastly, the introduction of the SiGHT concept, as well as a feasibility study for its production, is reported in this article.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Non-Fermi surface nesting driven commensurate magnetic ordering in Fe-doped S r 2 Ru O 4

Sr 2 RuO 4 , an unconventional superconductor, is known to possess an incommensurate spin-density wave instability driven by Fermi surface nesting. Here we report a static spin-density wave ordering with a commensurate propagation vector q c = (0.250.250) in Fe-doped Sr 2 RuO 4 , despite the magnetic fluctuations persisting at the incommensurate wave vectors q ic = (0.30.3L) as in the parent compound. The latter feature is corroborated by the first-principles calculations, which show that Fe substitution barely changes the nesting vector of the Fermi surface. Finally, these results suggest that in addition to the known incommensurate magnetic instability, Sr 2 RuO 4 is also in proximity to a commensurate magnetic tendency that can be stabilized via Fe doping.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Reflectance dependence of polytetrafluoroethylene on thickness for xenon scintillation light

Many rare event searches including dark matter direct detection and neutrinoless double beta decay experiments take advantage of the high VUV reflective surfaces made from polytetrafluoroethylene (PTFE) reflector materials to achieve high light collection efficiency in their detectors. As the detectors have grown in size over the past decade, there has also been an increased need for ever thinner detector walls without significant loss in reflectance to reduce dead volumes around active noble liquids, outgassing, and potential backgrounds. We report on the experimental results to measure the dependence of the reflectance on thickness of two PTFE samples at wavelengths near 178 nm. No change in reflectance was observed as the wall thickness of a cylindrically shaped PTFE vessel immersed in liquid xenon was varied between 1 mm to 9.5 mm.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

An origin of functional fatigue of shape memory alloys

Functional fatigue (FF) during thermal and mechanical cycling, which leads to the generation of macroscopic irrecoverable strain and the loss of dimensional stability, is a critical issue that limits the service life of shape memory alloys (SMAs). Although it has been demonstrated experimentally that such a phenomenon is related to microstructural changes, a fundamental understanding of the physical origin of FF is still lacking, especially from a crystallographic point of view. In this study, we show that in addition to the normal martensitic phase transformation pathway (PTP), there is a symmetry-dictated non-phase-transformation pathway (SDNPTP) during phase transformation cycling, whose activation could play a key role in leading to FF. By investigating crystal symmetry changes along both the PTPs and SDNPTPs, the characteristic types of defects (e.g., dislocations and grain boundaries) generated during transformation cycling can be predicted systematically, and agree well with those observed experimentally in NiTi. By analyzing key materials parameters that could suppress the SDNPTPs, strategies to develop high performance SMAs with much improved FF resistance through crystallographic design and transformation pathway engineering are suggested.

36 MATERIALS SCIENCE↗

On the universal late X-ray emission of binary-driven hypernovae and its possible collimation

It has previously been discovered that there is a universal power-law behavior exhibited by the late X-ray emission (LXRE) of a “golden sample” of six long energetic GRBs, when observed in the rest frame of the source. This remarkable feature, independent of the different isotropic energy (E {sub iso}) of each GRB, has been used to estimate the cosmological redshift of some long GRBs. This analysis is extended here to a new class of 161 long GRBs, all with E{sub iso}>10{sup 52} erg. These GRBs are indicated as binary-driven hypernovae (BdHNe) in view of their progenitors: a tight binary system composed of a carbon–oxygen core (CO{sub core}) and a neutron star undergoing an induced gravitational collapse (IGC) to a black hole triggered by the CO{sub core} explosion as a supernova (SN). We confirm the universal behavior of the LXRE for the “enlarged sample” (ES) of 161 BdHNe observed up to the end of 2015, assuming a double-cone emitting region. We obtain a distribution of half-opening angles peaking at θ=17.62{sup ∘}, with a mean value of 30.05{sup ∘}, and a standard deviation of 19.65{sup ∘}. This, in turn, leads to the possible establishment of a new cosmological candle. Within the IGC model, such universal LXRE behavior is only indirectly related to the GRB and originates from the SN ejecta, of a standard constant mass, being shocked by the GRB emission. The fulfillment of the universal relation in the LXRE and its independence of the prompt emission, further confirmed in this article, establishes a crucial test for any viable GRB model.

79 ASTRONOMY AND ASTROPHYSICS↗