Engineering Papers⌕ Search

Engineering topics

Wang, Xiong

Publications and source records attributed to Wang, Xiong.

ProgLIMI: Programmable LInk Metric Identification in Software-Defined Networks

In this paper, we propose the Programmable LInk Metric Identification (ProgLIMI) infrastructure for software-defined networking (SDN) networks. ProgLIMI identifies round-trip link metrics (RTLMs) from accumulated end-to-end metrics of selected measurement paths by leveraging the flexible routing control capability of SDN networks. ProgLIMI mainly solves three sub-problems: (1) monitor placement; (2) linearly independent measurement path construction; and (3) flow rule design. To reduce measurement cost, ProgLIMI tries to minimize the number of required monitors and flow rules. In this paper, we address the three sub-problems for both full and hybrid SDN networks. For full SDN networks, ProgLIMI can achieve full RTLM identification using only one monitor and two flow rules in each SDN switch. In contrast, the RTLM identification in hybrid SDN networks is more complicated due to the routing constraint of hybrid SDN networks. We first prove that the monitor placement problem in hybrid SDN networks is NP-hard. We then formulate the monitor placement and measurement path selection problem in hybrid SDN networks and propose a greedy heuristic algorithm to solve the problem efficiently. Our evaluations on both physical testbed and simulation platform reveal that ProgLIMI can accurately identify the RTLMs (delay and loss rate). Besides, ProgLIMI is also resource efficient, i.e., it only requires two flow rules in each SDN switch and a small number of monitors, and the extra probing traffic load incurred by ProgLIMI is also low.

97 MATHEMATICS AND COMPUTING↗

Software defined network inference with evolutionary optimal observation matrices

A key requirement for network management is the accurate and reliable monitoring of relevant network characteristics. In today's large-scale networks, this is a challenging task due to the scarcity of network measurement resources and the hard constraints that this imposes. Here, this paper proposes a new framework, called SNIPER, which leverages the flexibility provided by Software-Defined Networking (SDN) to design the optimal observation or measurement matrix that can lead to the best achievable estimation accuracy using Matrix Completion (MC) techniques. To cope with the complexity of designing large-scale optimal observation matrices, we use the Evolutionary Optimization Algorithms (EOA) which directly target the ultimate estimation accuracy as the optimization objective function. We evaluate the performance of SNIPER using both synthetic and real network measurement traces from different network topologies and by considering two main applications for per-flow size and delay estimations. Our results show that SNIPER can be applied to a variety of network performance measurements under hard resource constraints. For example, by measuring only 8.8% of all per-flow path delays in Harvard network [1], congested paths can be detected with probability of 0.94. Finally, to demonstrate the feasibility of our framework, we also have implemented a prototype of SNIPER in Mininet.

97 MATHEMATICS AND COMPUTING↗

Thermoacoustic and photoacoustic characterizations of few-layer graphene by pulsed excitations

We characterized the thermoacoustic and photoacoustic properties of large-area, few-layer graphene by pulsed microwave and optical excitations. Due to its high electric conductivity and low heat capacity per unit area, graphene lends itself to excellent microwave and optical energy absorption and acoustic signal emanation due to the thermoacoustic effect. When exposed to pulsed microwave or optical radiation, distinct thermoacoustic and photoacoustic signals generated by the few-layer graphene are obtained due to microwave and laser absorption of the graphene, respectively. Clear thermoacoustic and photoacoustic images of large-area graphene sample are achieved. A numerical model is developed and the simulated results are in good accordance with the measured ones. This characterization work may find applications in ultrasound generator and detectors for microwave and optical radiation. It may also become an alternative characterization approach for graphene and other types of two-dimensional materials.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Converting Y(OH){sub 3} nanofiber bundles to YVO{sub 4} polyhedrons for photodegradation of dye contaminants

Highlights: • YVO{sub 4} polyhedrons were prepared from Y(OH){sub 3} nanofiber bundles through a hydrothermal conversion process. • In contrast to the bulk oxide, the photocatalytic performance of the polyhedrons was much improved. • The main active species involved in photocatalytic oxidative reaction were also investigated. - Abstract: This paper reports a hydrothermal conversion process of rare earth microstructures, Y(OH){sub 3} nanofiber bundles, into YVO{sub 4} polyhedrons, together with the investigation on the related photocatalytic properties. The as-synthesized samples were characterized by a variety of techniques, including XRD, SEM, TEM and UV–vis diffuse reflectance spectroscopy. The photocatalytic activities of YVO{sub 4} polyhedrons were comparatively evaluated by the photodegradation of Rhodamine B and methylene blue. In contrast to the bulk oxide, the photocatalytic performance of the polyhedrons was much improved. The mechanism and the main active species involved in photocatalytic oxidative reaction were also investigated through the carriers trapping experiments.

36 MATERIALS SCIENCE↗

Construction of nerve guide conduits from cellulose/soy protein composite membranes combined with Schwann cells and pyrroloquinoline quinone for the repair of peripheral nerve defect

Regeneration and functional reconstruction of peripheral nerve defects remained a significant clinical challenge. Nerve guide conduits, with seed cells or neurotrophic factors (NTFs), had been widely used to improve the repair and regeneration of injured peripheral nerve. Pyrroloquinoline quinone (PQQ) was an antioxidant that can stimulate nerve growth factors (NGFs) synthesis and accelerate the Schwann cells (SCs) proliferation and growth. In present study, three kinds of nerve guide conduits were constructed: one from cellulose/SPI hollow tube (CSC), another from CSC combined with SCs (CSSC), and the third one from CSSC combined with PQQ (CSSPC), respectively. And then they were applied to bridge and repair the sciatic nerve defect in rats, using autograft as control. Effects of different nerve guide conduits on the nerve regeneration were comparatively evaluated by general analysis, sciatic function index (SFI) and histological analysis (HE and TEM). Newly-formed regenerative nerve fibers were observed and running through the transparent nerve guide conduits 12 weeks after surgery. SFI results indicated that the reconstruction of motor function in CSSPC group was better than that in CSSC and CSC groups. HE images from the cross-sections and longitudinal-sections of the harvested regenerative nerve indicated that regenerative nerve fibers had been formed and accompanied with new blood vessels and matrix materials in the conduits. TEM images also showed that lots of fresh myelinated and non-myelinated nerve fibers had been formed. Parts of vacuolar, swollen and abnormal axons occurred in CSC and CSSC groups, while the vacuolization and swell of axons was the least serious in CSSPC group. These results indicated that CSSPC group had the most ability to repair and reconstruct the nerve structure and functions due to the comprehensive contributions from hollow CSC tube, SCs and PQQ. As a result, the CSSPC may have the potential for the applications as nerve guide conduits in the field of nerve tissue engineering. - Highlights: • A novel nerve conduit was constructed and applied to repair nerve defect in rats. • Transparent hollow cellulose/soy protein isolate tube was used as conduit matrix. • Pyrroloquinoline quinine was adsorbed into the hollow tube as nerve growth factor. • Schwann cells were cultured into the hollow tube as seed cells. • The new nerve conduit could repair and reconstruct the peripheral nerve defects.

60 APPLIED LIFE SCIENCES↗

Enhanced visible light-responsive photocatalytic activity of LnFeO{sub 3} (Ln = La, Sm) nanoparticles by synergistic catalysis

Highlights: • LnFeO{sub 3} (Ln = La, Sm) nanoparticles were prepared by a facile sol–gel method. • The samples exhibit superior visible-light-responsive photocatalytic activity. • Synergistic effect will enhance the photodegradation of RhB under visible light. - Abstract: LnFeO{sub 3} (Ln = La, Sm) nanoparticles were prepared by a facile sol–gel method with assistance of glycol at different calcination temperatures. The as-synthesized LnFeO{sub 3} was characterized by X-ray diffraction, transmission electron microscopy, differential scanning calorimeter and thermogravimetric analysis, and UV–vis absorption spectroscopy. The photocatalytic behaviors of LnFeO{sub 3} nanoparticles were evaluated by photodegradation of rhodamine B under visible light irradiation. The results indicate that the visible light-responsive photocatalytic activity of LnFeO{sub 3} nanoparticles was enhanced remarkably by the synergistic effect between the semiconductor photocatalysis and Fenton-like reaction. And a possible catalytic mechanism was also proposed based on the experimental results.

36 MATERIALS SCIENCE↗

A facile mixed-solvothermal route to γ-Bi{sub 2}MoO{sub 6} nanoflakes and their visible-light-responsive photocatalytic activity

Graphical abstract: γ-Bi2MoO6 nanoflakes were successfully synthesized by a mixed-solvothermal process. The visible-light-responsive photocatalytic activities of the obtained γ-Bi2MoO6 nanoflakes were evaluated by photodegradation of Rhodamie B under visible light. The high degradation efficiency of RhB was attributed to the good crystallization and flake-like morphology of γ-Bi2MoO6 nanostructures, which is in accord with the photocurrent result. - Highlights: • γ-Bi{sub 2}MoO{sub 6} nanoflakes were obtained by a mixed-solvothermal process with SDBS as surfactant. • The photocurrent test was taken to characterize the photocatalytic activity. • The nanopowders exhibit high efficient photocatalytic activity under visibile-light irradiation. - Abstract: γ-Bi{sub 2}MoO{sub 6} nanoflakes were successfully synthesized by a mixed-solvothermal process with SDBS involved in the reaction. The as-prepared γ-Bi{sub 2}MoO{sub 6} was characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), and UV–vis absorption spectroscopy. The effect of different ratio of solvents on the resulting products was investigated. The visible-light-responsive photocatalytic activities of the obtained γ-Bi{sub 2}MoO{sub 6} nanoflakes were evaluated by photodegradation of Rhodamie B under visible light (λ > 400 nm). The high degradation efficiency of RhB was attributed to the good crystallization and flake-like morphology of γ-Bi{sub 2}MoO{sub 6} nanostructures, which is in accord with the photocurrent result.

36 MATERIALS SCIENCE↗