Engineering Papers⌕ Search

Engineering topics

Wang, Xiaoping

Publications and source records attributed to Wang, Xiaoping.

At least 163 records · Page 9

Chloride Metathesis and Dimethylamide Transfer in the Reaction of TaCl(NMe2)4 with ZnMe2 and MeMgCl: Spectroscopic Studies and X-ray Diffraction Structures of TaCl(Me)(NMe2)3 and ZnCl2(NHMe2)2

The reaction of TaCl(NMe2)4 with ZnMe2 in hydrocarbon solvent has been examined and found to give a mixture of TaCl(Me)(NMe2)3, TaMe(NMe2)4, and Ta(NMe2)5 by 1H NMR spectroscopy. Depending upon the work-up conditions employed, the compounds TaCl(Me)(NMe2)3 and ZnCl2(NHMe2)2 have been isolated and structurally characterized by X-ray crystallography. TaCl(NMe2)4 reacts with MeMgCl is a similar fashion and affords TaCl(Me)(NMe2)3 and Ta(NMe2)5 as the principal reaction products.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Diphosphine- and CO-Induced Fragmentation of Chloride-bridged Dinuclear Complex and Cp*Ir(mu-Cl)(3)Re(CO)(3) and Attempted Synthesis of Cp*Ir(mu-Cl)(3)Mn(CO)(3): Spectroscopic Data and X-ray Diffraction Structures of the Pentamethylcyclopentadienyl Compounds [Cp*IrCl{(Z)-Ph2PCH = CHPPh2}][Cl]center dot 2CHCl(3) and Cp*Ir(CO)Cl-2

The confacial bioctahedral compound Cp*Ir(mu-Cl)(3)Re(CO)(3) (1) undergoes rapid fragmentation in the presence of the unsaturated diphosphine ligand (Z)-Ph2PCH = CHPPh2 to give the mononuclear compounds [Cp*IrCl {(Z)-Ph2PCH = CHPPh2}][Cl] (2) and fac-ClRe(CO)(3)[(Z)-Ph2PCH = CHPPh2] (3). 2 has been characterized by H-1 and P-31 NMR spectroscopy and X-ray diffraction analysis. 2 center dot 2CHCl(3) crystallizes in the monoclinic space group C2/c, a = 35.023 (8) angstrom, b = 10.189 (2) angstrom, c = 24.003 (6) angstrom, b = 103.340 (3), V = 8,335 (3) angstrom 3, Z = 8, and d(calc) = 1.647 Mg/m(3); R = 0.0383, R-w = 0.1135 for 8,178 reflections with I> 2 sigma(I). The Ir(III) center in 2 exhibits a six-coordinate geometry and displays a chelating diphosphine group. Compound 1 reacts with added CO with fragmentation to yield the known compounds Cp*Ir(CO)Cl-2 (4) and ClRe(CO)(5) (5) in near quantitative yield by IR spectroscopy. Using the protocol established by our groups for the synthesis of 1, we have explored the reaction of [Cp*IrCl2](2) with ClMn(CO)(5) as a potential route to Cp*Ir(mu-Cl)(3)Mn(CO)(3); unfortunately, 4 was the only product isolated from this reaction. The solid-state structure of 4 was determined by X-ray diffraction analysis. 4 crystallizes in the triclinic space group P-1, a = 7.4059 (4) angstrom, b = 7.8940 (4) angstrom, c = 11.8488 (7) angstrom, alpha = 80.020 (1), beta = 79.758 (1), gamma = 68.631 (1), V = 630.34 (6) angstrom(3), Z = 2, and d(calc) = 2.246 Mg/m(3); R = 0.0126, R-w = 0.0329 for 2,754 reflections with I> 2 sigma(I). The expected three-legged piano-stool geometry in 4 has been crystallographically confirmed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

New Pt(II)(dithiolate) Compounds Possessing an Energetically Accessible Diphosphine-Based LUMO: Syntheses, Redox Properties, and Solid-State Structures of PtCl2(pbpcd), Pt(tdt)(pbpcd), and Pt(tdt)(bpcd)

The new ligand 2-(pyren-1-ylidene)-4,5-bis- (diphenylphosphino)-4-cyclopenten-1,3-dione (pbpcd) has been synthesized from the Knoevenagel condensation using 1-pyrenecarboxaldehyde with 4,5-bis(diphenylphosphino)- 4-cyclopenten-1,3-dione (bpcd). Displacement of the cod ligand in PtCl2(cod) by pbpcd furnishes PtCl2 (pbpcd) (2) in near quantitative yield. Treatment of 2 with the dipotassium salt of toluene-3,4-dithiol (K2tdt) affords the dithiolate compound Pt(tdt)(pbpcd) (3) as a 1:1 mixture of diastereomers. An alternative synthesis of 3 from Pt(tdt)(bpcd) (5) and 1-pyrenecarboxaldehyde also affords 3 in 23% yield. The pbpcd ligand and all new diphosphinesubstituted compounds have been isolated and fully characterized in solution by IR and NMR spectroscopies, and the solid-state structures of 2_CH2Cl2, 3_toluene, and 5_CH2Cl2 established by X-ray diffraction analyses. The solid-state structure of each product exhibits a square-planar architecture at the metal center. The redox properties of the pbpcd ligand and the tdt-substituted compound 3 have been explored by cyclic and differential-pulse voltammetry, and these data are discussed with respect to extended Huckel MO calculations and the nature of the HOMO and LUMO levels in each compound.

36 MATERIALS SCIENCE↗

Synthesis of the donor acceptor ligand 2-(4-dimethylaminobenzylidene)-4,5-bis(diphenylphosphino)-4-cyclopenten-1,3-dione (dbpcd) and X-ray diffraction structure of the platinum(II) compound PtCl2(dbpcd) 1.5CH2Cl2

The synthesis of the donor acceptor ligand 2-(4-dimethylaminobenzylidene)-4,5-bis(diphenylphosphino)-4-cyclopenten-1,3-dione (dbpcd) from the Knoevenagel condensation of 4-(dimethylamino)benzaldehyde with 4,5-bis(diphenylphosphino)-4-cyclopenten-1,3-dione (bpcd) is reported. This new ligand reacts with PtCl2(cod) to afford the platinum(II) complex PtCl2(dbpcd) in high yield. The dbpcd ligand and PtCl2(dbpcd) have been isolated and characterized by IR and NMR spectroscopies, cyclic voltammetry, MO calculations at the extended H ckel level, and X-ray diffraction analysis in the case of PtCl2(dbpcd).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

New octahedral Ta(V) hydrazido-substituted compounds for atomic layer deposition: Syntheses, X-ray diffraction structures of TaCl(NMe2)(3)[N(TMS)NMe2] and Ta(NMe2)(4)[N(TMS)NMe2], and fluxional behavior of the amido and hydrazido ligands in solution

The synthesis and structural characterization of new tantalum(V) compounds containing a single hydrazido(1) ligand are reported. Hydrazinolysis of TaCl(NMe2)(4) using trimethylsilyl(dimethyl)hydrazine affords the compound TaCl(NMe2)(3)[N(TMS)NMe2] in essentially quantitative yield. Metathetical replacement of the chloride ligand in TaCl(NMe2)(3)]N(TMS)NMe2] by LiNMe2 gives the all-nitrogen coordinated compound Ta(NMe2)(4)[N(TMS)NMe2]. VT H-1 NMR studies support the existence of low-energy pathways involving rotation about the Ta-N bonds of the ancillary amido and hydrazido ligands in both hydrazido-substituted compounds. X-ray crystallographic analyses confirm the octahedral disposition about the tantalum metal in TaCl(NMe2)(3)[N(TMS)NMe2] and Ta(NMe2)(4)[N(TMS)NMe2] and the presence of an mu(2)-hydrazido(1) ligand. Preliminary data using Ta(NMe2)(4)[N(TMS)NMe2] as an ALD precursor for the preparation of tantalum nitride and tantalum oxide thin films are presented.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Directed Synthesis of the Triangular Mixed-Metal Cluster H2RhRe2Cp*(CO)9: Ligand Fluxionality and Facile Cluster Fragmentation in the Presence of CO, Halogenated Solvents, and Thiols

The reaction of H2Re2(CO)8 (1) with Cp*Rh(CO)2 (2) in refluxing hexane affords the mixed-metal clusters H2RhRe2Cp*(CO)9 (4, major product), HRh2ReCp*2(CO)6 (5), and HRhRe3Cp*(CO)14 (6). 4 and 5 are electron-precise 48e- clusters and display triangular metallic cores, while 6 contains 64-valence electrons and exhibits a spiked-triangular core having a pendant Re(CO)5 moiety. Heating 1 with Cp*2Rh2(CO)2 (3) gives 4 and 5 as the principal products, in addition to H2Rh2Re2Cp*2(CO)8 (7) in low yield. Cluster 7 possesses 60e- and contains a tetrametallic core with two face-capping CO and hydride groups. Heating 4 under CO leads to cluster fragmentation and formation of Re2(CO)10 and 2 in essentially quantitative yield, as assessed by IR spectroscopy. The kinetics for the fragmentation of 4 in toluene under CO have been investigated over the temperature range 325-349 K by UV-vis spectroscopy. On the basis of the first-order rate constants and the Eyring activation parameters [ H = 25.0(8) kcal/mol; S = -2.6(3) eu], a rate-limiting step involving a polyhedral opening of 4 is supported. 4 is thermally and photochemically sensitive and reactions conducted in the presence of chlorinated solvents furnish the face-shared bioctahedral compound Cp*Rh( -Cl)3Re(CO)3 (8). Heating 4 and H2S in benzene at ca. 60 EC furnishes the 48e- triangular cluster S2Rh3Cp*(CO)4 (9), which contains two Rh(CO)2 moieties and two face-capping sulfide groups. The reaction of 4 with p-methylbenzenethiol gives the sulfido-bridged dimer Cp*Rh( -SC6H4Me-p)3Re(CO)3 (11). The dinuclear compounds Cp*Rh( -Cl)( -SC6H4Me-p)2Re(CO)3 (10) and 11 are formed when 8 is allowed to react with p-methylbenzenethiol. Treatment of 8 and 10 with excess p-methylbenzenethiol yields 11 at elevated temperature in toluene. Compounds 4-11 have been isolated and fully characterized by IR and NMR spectroscopies and by X-ray crystallography. The reactivity displayed by 4 is contrasted with the known indenyl-substituted cluster H2Re2Ir( 5-ind)(CO)9 prepared earlier by Shapley and co-workers.

36 MATERIALS SCIENCE↗

Ligand substitution behavior of Ru6(mu6-C)(CO)17 with unsaturated diphosphines: facile capping of a polyhedral face and photochemically promoted P C bond cleavage in the cluster Ru6(mu6-C)(CO)14(mu3-bpcd)

The ligand substitution chemistry of the hexaruthenium cluster Ru-6(mu(6)-C)(CO)(17) (1) with several unsaturated diphosphine ligands has been investigated. Thermolysis of 1 with (Z)-Ph2PCH=CHPPh2 (dppen) furnishes the new cluster compounds Ru-5(mu(5)-C)(CO)(12)(mu(3)-dppen) (2), Ru-6(mu(6)-C)(CO)(14)(mu(3)-dppen) (3), and Ru-6(mu(6)-C)(CO)(12)(mu(3)-dppen)(mu-dppen) (4). Clusters 2 and 3 are also obtained when a mixture of 1 and dppen is treated with the oxidative-decarbonylation reagent Me3NO. Thermolysis or Me3NO activation of 1 in the presence of 4,5-bis(diphenylphosphino)-4-cyclopenten- 1,3-dione (bpcd) yields Ru-6(mu(6)-C)(CO)(14)(mu(3)-bpcd) (4) as the sole observable product. Near-UV irradiation of 4 leads to P-C bond cleavage and the formation of phosphido-bridged cluster Ru-6(mu(6)-C)(CO)(13)[mu(3)-C=C(PPh2)C(O)CH2C(O)](mu-PPh2) (6) in essentially quantitative yield. The reaction between 1 and the ligand 3,4-bis(diphenylphosphino)-5-methoxy-2(5H)-furanone (bmf) leads to the formation of Ru-6(mu(6)-C)(CO)(14)(mu(3)-bmf) (7), which exists as a single diastereomer in solution as shown by H-1 and P-31 NMR spectroscopy. The molecular structures and the binding mode of the ancillary diphosphine ligand(s) in 2-7 have all been established by X-ray diffraction analyses. The solid-state structure of 7 reveals that the chiral bmf ligand caps one of the metallic faces stereospecifically with the 5-methoxy moiety oriented distal or trans relative to the Ru-6 polyhedral core. The new substitution products are discussed relative to the products obtained from 1 and the related diphosphine ligands dppm, dppe, dppf, and dppbz.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Crystallographic Observation of Dynamic Gas Adsorption Sites and Thermal Expansion in a Breathable Fluorous Metal?Organic Framework

Playing accordion: Cooling a single crystal of a microporous fluorous metal-organic framework under ambient atmosphere leads to very large breathing upon gas adsorption, during which multiple N2 molecules are filled into channels and cages (see picture). While the framework exhibits remarkable positive thermal expansion under vacuum, a gigantic apparent negative thermal expansion takes place when the crystal is exposed to N2 at ambient pressure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Transfer of Amide and 2-Methoxyethoxy Groups and Sodium Encapsulation in the Reaction of TaCl3[N(TMS)2]2 with Sodium Bis(2-methoxyethoxy)aluminum Hydride: X-ray Structure of [NaAl{N(TMS)2}(OCH2CH2OMe)3]2

The reaction between the tantalum compound TaCl3[N(TMS)2]2 and the hydridic reducing agent sodium bis(2-methoxyethoxy)aluminum hydride (Vitride) has been investigated in toluene solution at room temperature and found to afford the dimeric aluminate complex [NaAl{N(TMS)2}(OCH2CH2OMe)3]2 as the sole isolable product. The molecular structure of the product establishes the existence of a four-coordinate aluminum atom and the formal transfer of the 2-methoxyethoxy and bis(trimethylsilyl)amide groups to the aluminate product. The aggregation of two NaAl{N(TMS)2}(OCH2CH2OMe)3 units serves to bind the two sodium cations in a crown-ether fashion through six ancillary oxygen atoms.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Syntheses, Spectroscopic Data, and X-ray Diffraction Structures of the Heterometallic RuRe Face-shared Bioctahedral (eta(6)-cymene)Ru(mu-Cl)(3)Re(CO)(3) and MnRu2 Edge-shared Trioctahedral [fac-ClRu(CO)(3)](2)(mu-Cl)(4)Mn(H2O)(2) Complexes

Thermolysis of the diruthenium compound [(eta(6)-cymene)RuCl2](2) (1) with ClRe(CO)(5) (2) leads to the formation of the new confacial bioctahedral compound (eta(6)-cymene) Ru(mu-Cl)(3)Re(CO)(3) (3) in good yields; the same product has also been isolated when a mixture of 1 and 2 is irradiated with near UV-vis light for an extended period of time. Heating 1 and ClMn(CO)(5) (4) does not furnish the corresponding manganese analogue of 3 but rather the trioctahedral halide-bridged product [fac-ClRu(CO)(3)](2)(mu-Cl)(4)Mn(H2O)(2) (5). 3 and 5 have been fully characterized in solution and their molecular structures established by X-ray crystallography.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

alpha-Diimine Ligand Coordination and C H Bond Activation in the Reaction of Os3(CO)10(MeCN)2 with 6-R-2,2'-Bipyridine (where R = Et, Ph): X-ray Diffraction Structures of the Ortho-Metalated

The reactivity of the labile cluster Os3(CO)10(MeCN)2 (1) with the monofunctionalized heterocyclic ligands 6-R-2,2 -bipyridine (where R = Et, Ph) has been investigated. The alkyl-substituted heterocycle 6-Et-2,2 -bipyridine reacts with 1 in refluxing CH2Cl2 to give an isomeric mixture of HOs3(CO)9(N2C12H11) due to cyclometalation of the side-chain ethyl group (2) and ortho metalation of the unsubstituted bipyridine ring (3). The solid-state structure of the latter cluster, HOs3(CO)9(N2C10H6-6-Et) (3), has unequivocally established the site of the C-H bond activation in the product. Treatment of 1 with the aryl-substituted ligand 6-Ph-2,2 -bipyridine proceeds similarly with ortho metalation at the ancillary phenyl group and the C-6 ortho site of the unsubstituted bipyridine ring, as verified by 1H NMR spectroscopy. The X-ray diffraction structure of the thermodynamically more stable bipyridine-metalated cluster HOs3(CO)9(N2C10H6-6-Ph) (5) has been determined. The course of these reactions is discussed with respect to our recent study involving the reaction of cluster 1 with the ligand 6-Me-2,2 -bipyridine. Graphical Abstract The reaction between the labile cluster Os3(CO)10(MeCN)2 (1) and the monofunctionalized heterocyclic ligand 6-Et-2,2 -bipyridine proceeds readily at room temperature to furnish an isomeric mixture of the cyclometalated and ortho-metalated hydride-bridged clusters HOs3(CO)9(N2C12H11) (2 and 3). Treatment of 1 with 6-Ph-2,2 -bipyridine also yields two distinct hydride-containing clusters that result from independent ortho-metalation paths involving the 6-phenyl substituent and unsubstituted bipyridine group. The bipyridine-derived ortho metalation attendant in the new clusters HOs3(CO)9(N2C10H6-6-Et) (3) and HOs3(CO)9(N2C10H6-6-Ph) (5) has been established by X-ray crystallography.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Preparation and reactivity of the heterobimetallic ReIr face-shared bioctahedral compounds Cp*Ir(mu-Cl)(3)Re(CO)(3) and Cp*Ir(mu-SC6H4Me-4)(3)Re(CO)(3): X-ray diffraction structures and redox behavior

Thermolysis of the dinuclear compound [Cp*IrCl2](2) (1) with ClRe(CO)(5) (2) leads to the formation of the confacial bioctahedral compound Cp*Ir(mu-Cl)(3)Re(CO)(3) (3) in high yield. Whereas the substitution of the chloride ligands in 3 is observed on treatment with excess p-methylbenzenethiol to furnish the sulfido-bridged compound Cp*Ir(mu-SC6H4Me-4)(3)Re(CO)(3) (4), 3 undergoes fragmentation upon reaction with tertiary phosphines [PPh3 and P(OMe)(3)] to furnish the mononuclear compounds CP*IrCl2P and fac-ClRe-(CO3)P-2. Both 3 and 4 have been isolated and fully characterized in solution by IR and H-1 NMR spectroscopies, and their solid-state structures have been established by X-ray crystallography. The redox properties of 3 and 4 have been explored by cyclic voltammetry, and the results are discussed relative to extended Huckel MO calculations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Arylpalladium Phosphonate Complexes as Reactive Intermediates in Phosphorus-Carbon Bond Forming Reactions

Phosphorus-carbon bond formation from discrete transition metal complexes have been investigated through a combination of synthetic, spectroscopic, crystallographic, and computational methods. Reactive intermediates of the type (diphosphine)Pd(aryl)(P(O)(OEt)(2)) have been prepared, characterized, and studied as possible intermediates in metal-mediated coupling reactions. Several of the reactive intermediates were characterized crystallographicaliy, and a discussion of the solid state structures is presented. In contrast to other carbon-heteroelement bond forming reactions, palladium complexes containing electron-donating substituents on the aromatic fragment exhibited faster rates of reductive elimination. Large bite angle diphosphine ligands induced rapid rates of elimination, while bipyridine and small bite angle diphosphine ligands resulted in much slower rates of elimination. An investigation of the effect of typical impurities on the elimination reaction was carried out. While excess diphosphine, pyridine, and acetonitrile had little effect on the observed rate, the addition of water slowed the phosphorus-carbon bond forming reaction. Coordination of water to the complex was observed spectroscopically and crystallographically. Computational studies were utilized to probe the reaction pathways for P-C bond formation via Pd catalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis and Characterization of Group 4 Amide Chloride and Amide Imide Complexes

Group 4 amide chloride complexes (Me2N)(2)Ht[N(SiMe3)(2)]Cl (1b), [(Me3Si)(2)N](2)MCl2Li(THF)(3)Cl (M = Zr, 2a; Hf, 2b), and [(Me3Si)(2)MCl2MCl2(THF) (M = Zr, 3a; Hf, 3b) and their X-ray crystal structures are reported. An improved synthesis of {[(Me3Si)(2)N]Ti(mu-NSiMe3)Cl}(2) (4) and its use to prepare amide imide {[(Me3Si)(2)N]Ti(mu-NSiMe3)(NMe2}(2) (5) are also presented. X-ray crystal structures of 5 and previously reported complexes (Me2N)(2)Zr[N(SiMe3)(2)]Cl (1a), [(Me3Si)(2)N](2)TiCl2 (6), and [(Me3Si)(2)N]ZrCl3(THF)(2) (7) have been determined. Both 1a and 1b are dimers {[(Me3Si)(2)N](2)TiCl2 (M = Zr, Hf) in the solid state.

36 MATERIALS SCIENCE↗

Synthesis, Reactivity Investigation, and X-ray Diffraction Structures of New Platinum(II) Compounds Containing Redox-Active Diphosphine Ligands

Substitution of the 1,5-cyclooctadiene (cod) ligand in PtCl2(cod) (1) by the diphosphine ligand 4,5-bis(diphenylphosphino)-4-cyclopenten-1,3-dione (bpcd) yields PtCl2(bpcd) (2). Knoevenagel condensation of 2 with 9-anthracenecarboxaldehyde leads to the functionalization of the bpcd ligand and formation of the corresponding 2-(9-anthracenylidene)-4,5-bis(diphenylphosphino)-4-cyclopenten-1,3-dione (abpcd) substituted compound PtCl2(abpcd) (3), which is also obtained from the direct reaction of 1 with the abpcd ligand in near quantitative yield. The reaction of 3 with disodium maleonitriledithiolate (Na2mnt) affords the chelating dithiolate compound Pt(mnt)(abpcd) (4). Compounds 2 C4 have been fully characterized in solution by IR and NMR spectroscopies (1H and 31P), and their molecular structures established by X-ray crystallography. The electrochemical properties of 2 C4 have examined by cyclic voltammetry, and the nature of the HOMO and LUMO levels in these systems has been established by MO calculations at the extended H ckel level, the results of which are discussed with respect to electrochemical data and related diphosphine derivatives.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

New platinum compounds containing the diphosphine ligand 2-(ferrocenylidene)-4,5-bis(diphenylphosphino)-4-cyclopenten-1,3-dione (fbpcd): Synthesis, redox behavior, and X-ray diffraction structures Of PtCl2(fbpcd) and Pt(mnt)(fbpcd)

The reaction of the redox-active diphosphine ligand 2-(ferrocenylidene)-4,5-bis(diphenylphosphino)-4-cyclopenten-1,3-dione (fbpcd) with PtCl2(1,5-cod) furnishes the platinum(II) compound PtCl2(fbpcd) (2). Treatment of 2 with disodium maleonitriledithiolate (Na(2)mnt) yields the chelating thiolate compound Pt(mnt)(fbpcd) (3). Both 2 and 3 have been fully characterized in solution by IR, UV-Vis, and NMR spectroscopies, and their molecular structures established by X-ray crystallography. The redox properties of the fbpcd ligand and compounds 2 and 3 have been investigated by cyclic voltammetry, and the composition of the HOMO and LUMO levels in these systems have been determined by extended Huckel MO calculations, the results of which are discussed with respect to electrochemical data.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗