Engineering Papers⌕ Search

Engineering topics

Wang, X.

Publications and source records attributed to Wang, X..

At least 127 records · Page 7

Investigation on Microsegregation of IN718 Alloy During Additive Manufacturing via Integrated Phase-Field and Finite-Element Modeling

In this work, we apply a multi-scale model combining finite-element method (FEM) and phase-field model (PFM) to simulate the evolution of solidification microstructures at different locations within a molten pool of an additively manufactured IN718 alloy. Specifically, the FEM is used to calculate the shape of molten pool and the relative thermal gradient G at the macroscale. Then, the calculated thermal information is input into PFM for microstructure simulation. Finally, the morphology of solidification structures and formation of Laves phase at different sites are studied and compared. We found that the solidification site with a large angle between the temperature gradient and the preferred crystalline orientation could build up a high niobium (Nb) concentration in the liquid during solidification but has less possibility of forming continuous long chain morphology of Laves phase particles. This finding provides an understanding of the microstructure evolution inside the molten pool of IN718 alloy during solidification. Further, the finding indicates that the site with a large misorientation angle will have a good hot cracking resistance after solidification.

36 MATERIALS SCIENCE↗

Vertical Magnetic Measurement System Commis-sioning and First Measurements of the First Full-Length Prototype Quadrupole Magnet for the LHC Hi-Lumi Upgrade

This paper will report the commissioning of the vertical magnetic measurement system and the warm (room temperature) and cold (cryogenic) magnetic field measurements of the first full-length (4.2 m) quadrupole built by the US Accelerator Upgrade Project (AUP) project (formerly the LARP collaboration) for the high luminosity upgrade of the Large Hadron Collider at CERN. The magnet, designated MQXFAP2, is a prototype preceding production for the AUP Accelerator Upgrade Project (AUP). AUP will provide ten 8.4 m superconducting insertion region (IR) quadrupoles for the Hi-Lumi Upgrade. The 8.4 m quadrupoles will be built by assembling two 4.2 m magnets in a single cryostat. Agreement between BNL’s and LBNL’s warm measurement data has indicated that the upgraded vertical magnetic measurement system at BNL is ready for MQXFA magnet production testing. The cold magnetic measurement has been performed and preliminary data analysis has been conducted. The measured data indicates that the MQXFAP2 magnet has good magnetic field which meets the preliminary MQXFA magnet acceptance criteria.

43 PARTICLE ACCELERATORS↗

Area-preserving scheme for efficiency enhancement in single-pass tapered free electron lasers

Efficiency enhancement of a single-pass short-wavelength high-gain tapered free electron laser (FEL) has recently been intensively studied. The goal is to sustain the growth of radiation power in the post-saturation regime. Among the various schemes, the undulator tapering is considered an effective route to achieve higher power extraction efficiency. The tapering strategy can be of constant or varying resonant phase along the undulator axis. In this paper we propose an efficiency-enhancement scheme based on preservation of the longitudinal phase space area which ensures trapping of resonant particles in the ponderomotive bucket as long as possible along the undulator axis before significant particle depletion occurs. In the meanwhile such a scheme takes advantage of the increase of the radiation field amplitude to precipitate the particle deceleration process at the middle stage of undulator tapering. We analyze such an area-preserving scheme of undulator tapering by formulating the post-saturation FEL interaction in a one-dimensional (1-D) model via introduction of the particle trapping fraction. The output performance is evaluated through numerical iteration and confirmed with 1-D particle tracking simulations. The results show that the optimal power extraction efficiency based on the proposed scheme, together with a prebunched beam, can be greatly improved within relatively short taper length compared with other schemes before radiation diffraction effect becomes significant. Besides, the undesired sideband effects are found to be effectively suppressed. For the proposed area-preserving taper scheme, we also derive an analytical approximate formula for the resonant phase as a function of undulator axis. In conclusion, we expect that the analysis can shed light on the aim to further enhance the power extraction efficiency in single-pass tapered FELs.

47 OTHER INSTRUMENTATION↗

13 TeV pp collisions, Exotics type, MADGRAPH/PY8 generator: tev13pp_mg5_chaHT_tbeta_tb

Production of charged Higgs (H-) (with different masses) associated with t (top) using MG5_aMC_v2_6_1 at LO QCD. PYTHI8 is used for H+ decays, PS and hadronisation. Charged higgs decay to t plus b-quark (done in Pythia8) in 100% cases. The cross sections are for tan(beta)=1-7. NNPDF23_LO used for PDF. It uses 5 flavour number scheme (b-quark is a part of proton PDF). Pythia8 is used for showering and hadronisation and deacys. H+ masses ranged from 500 GeV to 8000 GeV (included to the names of files as *_m[MASS]). Cross section for each file depends on generated masses. 5,000 events per file. LHE events from MG5 are in "tev13_mg5_HT5F.tgz" Samples are created with the help of Xiaoping Wang and Carlos E.M. Wagner. Decays: Decays of H+ are handled by PYTHIA8. Events are created assuming charged Higgs to decay to b-quark and to-quarks with 100% branching ratio. No specific decay of top quarks was used. To create realistic cross sections, you should multiply the obtained cross sections by the branching ratio [H- to b-t~]. Slimming: Particle records are slimmed (all stable with pT>0.3 GeV) and (PID=5 || PID=6) or PID>22 && PID<38) or PID>10 && PID<17).

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

13 TeV pp collisions, Exotics type, MADGRAPH/PY8 generator: tev13pp_mg5_chaHT_tbeta_hw

Production of charged Higgs (H-) (with different masses) associated with t (top) using MG5_aMC_v2_6_1 at LO QCD. PYTHI8 is used for H+ decays, parton shower and hadronisation. The cross sections are for tan(beta)=1-7. NNPDF23_LO used for PDF. It uses 5 flavour number scheme (b-quark is a part of proton PDF). Pythia8 is used for showering and hadronisation. H+ masses ranged from 500 GeV to 8000 GeV (included to the names of files as *_m[MASS]). Cross section for each file depends on generated masses. 5,000 events per file. LHE events from MG5 are in "tev13_mg5_HT5F.tgz" Samples are created with the help of Xiaoping Wang and Carlos E.M. Wagner. Decays: Decays of H+ are performed by PYTHIA8. Events are created assuming charged Higgs decay to SM Higgs and W+/- in 100% cases. SM Higgs decays to bbbar. To create realistic cross sections, you should multiply the obtained cross sections by the branching ratio of [H+ -> H0W], and multiply by the SM Higgs branching of 0.584 for [H0 -> bbar]. Slimming: Particle records are slimmed (all stable with pT>0.3 GeV) and (PID=5 || PID=6) or PID>22 && PID<38) or PID>10 && PID<17).

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

13 TeV pp collisions, Exotics type, MADGRAPH/PY8 generator: tev13pp_mg5_chaHW_tbeta_hw

Production of charged H+ (with different masses) plus W using MG5_aMC_v2_6_1 at LO QCD. Pythi8 is used for PS and hadronisation. The cross sections are for tan(beta)=1-7 (included to file names). NNPDF23_LO used for PDF. Pythia8 is used for decays, showering and hadronization. It uses 5 flavour number scheme (b-quark is a part of proton PDF). H+ masses ranged from 500 GeV to 8000 GeV (included to the names of files as *_m[MASS]). Cross section for each file depends on generated masses and tan(beta). 5,000 events per file. LHE events from MG5 are in "tev13_mg5_chaHW_LHE.tgz". Samples are created with the help of Xiaoping Wang and Carlos E.M. Wagner. Decays: Decays of H+ are performed by PYTHIA8. Events are created assuming charged Higgs decay to SM Higgs and W+/- in 100% cases. SM Higgs decays to bbbar. To create realistic cross sections, you should multiply the obtained cross sections by the branching ratio of [H+ -> H0W], and multiply by the SM Higgs branching of 0.584 for [H0 -> bbbar] deacys. Slimming: Particle records are slimmed (all stable with pT>0.3 GeV) and (PID=5 || PID=6) or PID>22 && PID<38) or PID>10 && PID<17).

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

13 TeV pp collisions, Exotics type, MADGRAPH/PY8 generator: tev13pp_mg5_chaHW_tbeta_tb

Production of charged H+ (with different masses) associated with W- using MG5_aMC_v2_6_1 at LO QCD. PYTHI8 is used for PS and hadronisation. The cross sections are for tan(beta)=1-7. NNPDF23_LO used for PDF. It uses 5 flavour number scheme (b-quark is a part of proton PDF). Pythia8 is used for H+ decays, showering and hadronization. H+ masses ranged from 500 GeV to 8000 GeV (included to the names of files as *_m[MASS]). Cross section for each file depends on generated masses. 5,000 events per file. LHE events from MG5 are in "tev13_mg5_chaHW_LHE.tgz" Samples are created with the help of Xiaoping Wang and Carlos E.M. Wagner. Decays: Decays are done by PYTHIA8. Events are created assuming charged Higgs to decay to b-quark and top-quarks in 100% cases. No specific decay of top quarks was used. To create realistic cross sections, you should multiply the obtained cross sections from ProMC files by the branching ratio [H- to b-t~] Slimming: Particle records are slimmed (all stable with pT>0.3 GeV) and (PID=5 || PID=6) or PID>22 && PID<38) or PID>10 && PID<17).

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Progress on HL-LHC Nb 3 Sn Magnets

The high-luminosity Large Hadron Collider (HL-LHC) project aims at allowing to increase the collisions in the LHC by a factor of ten in the decade 2025-2035. One essential element is the superconducting magnet around the interaction region points, where the large aperture magnets will be installed to allow to further reduce the beam size in the interaction point. The core of this upgrade is the Nb 3 Sn triplet, made up of 150-mm aperture quadrupoles in the range of 7-8 m. The project is being shared between the European Organization for Nuclear Research and the US Accelerator Upgrade Program, based on the same design, and on the two strand technologies. The project is ending the short model phase, and entering the prototype construction. We will report on the main results of the short model program, including the quench performance and field quality. A second important element is the 11 T dipole that replaces a standard dipole making space for additional collimators. The magnet is also ending the model development and entering the prototype phase. A critical point in the design of this magnet is the large current density, allowing increase of the field from 8 to 11 T with the same coil cross section as in the LHC dipoles. This is also the first two-in-one Nb 3 Sn magnet developed so far. We will report the main results on the test and the critical aspects.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Test Result of the Short Models MQXFS3 and MQXFS5 for the HL-LHC Upgrade

© 2002-2011 IEEE. In the framework of the High-Luminosity Large Hadron Collider, the installation of a new generation of quadrupole magnets is foreseen on each side of ATLAS and CMS experiments. The new magnets are based on Nb 3 Sn technology and shall be able to reach an ultimate current of 17.9 kA with a peak field of 12.3 T in the coil. In 2016 and 2017, the first two short models, called MQXFS3 and MQXFS5, have been tested at 4.2 and 1.9 K in the two new test benches at the European Organization for Nuclear Research. This paper presents the result of the quench performance of the two models; the first magnet reached nominal but failed to reach ultimate, showing detraining in one coil. MQXFS5 reached ultimate performance without any detraining phenomena, validating the PIT conductor used for the first time in this magnet program.

Bajas, Hugues↗

Production of Entanglement Entropy by Decoherence

We examine here the dynamics of entanglement entropy of all parts in an open system consisting of a two-level dimer interacting with an environment of oscillators. The dimer-environment interaction is almost energy conserving. We find the precise link between decoherence and production of entanglement entropy. We show that not all environment oscillators carry significant entanglement entropy and we identify the oscillator frequency regions which contribute to the production of entanglement entropy. For energy conserving dimer-environment interactions the models are explicitly solvable and our results hold for all dimer-environment coupling strengths. We carry out a mathematically rigorous perturbation theory around the energy conserving situation in the presence of small non-energy conserving interactions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Interactive microstructural phenomena during non-isothermal annealing of an Al-Mg-Si-Cu alloy

Highlights: • A non-isothermal annealing process that is concurrent with precipitation is investigated. • The mechanism of grain refinement through the interactions of precipitation, recovery and recrystallization is identified. • The combination of non-isothermal annealing and proper pre-deformation temper condition tetrads recovery. • Massive recrystallization nucleation is achieved by delaying recovery. • The growth of recrystallized grains is controlled by coarsening of precipitates that pin the grain boundaries. - Abstract: Interactions between precipitation, recovery and recrystallization during a non-isothermal annealing process in an Al-Mg-Si-Cu alloy have been investigated through a comprehensive experimental analysis. Non-isothermal annealing with a slow heating rate that starts from a low temperature is found to promote homogeneous nucleation of precipitates. The uniformly distributed precipitates limit the extent of recovery, which in turn facilitates extensive nucleation of new grains within the deformed microstructure. The growth of the recrystallized grains is strongly controlled through pinning of grain boundaries by precipitates. During the final stages of annealing, enhanced diffusion at the recrystallization front leads to preferential precipitate coarsening, release of grain boundaries from precipitates pinning, and completion of recrystallization. These interactive microstructural phenomena explain the effectiveness of a non-isothermal annealing route combined with an adequate level of deformation in obtaining a fine-grained recrystallized structure.

36 MATERIALS SCIENCE↗

Counting the electrons in a multiphoton ionization by elastic scattering of microwaves

Multiphoton ionization (MPI) is a fundamental first step in high-energy laser-matter interaction and is important for understanding the mechanism of plasma formation. With the discovery of MPI more than 50 years ago, there were numerous attempts to determine the basic physical constants of this process in direct experiments, namely photoionization rates and cross-sections of the MPI; however, no reliable data was available until now, and the spread in the literature values often reaches 2–3 orders of magnitude. This is due to the inability to conduct absolute measurements of plasma electron numbers generated by MPI, which leads to uncertainties and, sometimes, contradictions between MPI cross-section values utilized by different researchers across the field. Here, we report the first direct measurement of absolute plasma electron numbers generated at MPI of air, and subsequently we precisely determine the ionization rate and cross-section of eight-photon ionization of oxygen molecule by 800 nm photons σ 8 = (3.3 ± 0.3)×10 -130 W -8 m 16 s -1 . The method, based on the absolute measurement of the electron number created by MPI using elastic scattering of microwaves off the plasma volume in Rayleigh regime, establishes a general approach to directly measure and tabulate basic constants of the MPI process for various gases and photon energies.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

MoS 2 /TiO 2 heterostructures as nonmetal plasmonic photocatalysts for highly efficient hydrogen evolution

In this study, we report a nonmetal plasmonic MoS2@TiO2 heterostructure for highly efficient photocatalytic H2 generation. Large area laminated Z-scheme MoS2 in conjunction with TiO2 nanocavity arrays are achieved via carefully controlled anodization, physical vapor deposition, and chemical vapor deposition processes. Broad spectral response ranging from ultraviolet (UV)-visible (vis) to near-infrared (NIR) wavelengths and finite element frequency-domain simulation suggest that this MoS2@TiO2 heterostructured photocatalyst possesses an enhanced activity for H+ reduction. A high H2 yield rate of 580 mmol h-1 g-1 is achieved using a low catalyst loading mass of 10.2 μg. The spatially uniform heterostructure, correlated to plasmon-resonance through conformal coating MoS2 that effectively regulated charge transfer pathways, is proven to be vitally important for the unique solar energy harvesting and photocatalytic H2 production. As an innovative exploration, our study demonstrates that the photocatalytic activities of nonmetal, earth-abundant materials can be enhanced with plasmonic effects, which may serve as an excellent catalytic agent for solar energy conversion to chemical fuel. Periodically patterned MoS 2 /TiO 2 heterostructures were rationally designed as nonmetal plasmonic photocatalysts for highly efficient hydrogen evolution.

Environmental Molecular Sciences Laboratory↗

Study on the role of Hsa-miR-31-5p in hypertrophic scar formation and the mechanism

Highlights: • The level of miR31-5p in HS was higher than in NS. • MiR31-5p plays a central role for hypoxia induced ECM synthesis and contraction. • Blocking miR31-5p inhibits HIF-1a activation in hypoxic via upregulating FIH. Hypertrophic scar (HS) formation is associated with the fibrosis of fibrocytes caused by excessive extracellular matrix (ECM) synthesis and deposition, the initial event of HS formation. Our high throughput screen of miRNA expression profiles identified hsa-miR31-5p, whose transcription level was most differentially in normal skin fibroblasts (NS) and HS among other miRNAs. The level of hsa-miR31-5p in HS was significantly higher than in NS. In-vitro functional experiments showed hsa-miR31-5p knockdown remarkably suppressed the proliferation of hypertrophic scar fibroblasts (HSFBs) under hypoxia, promoted cell invasion, and inhibited the expression of Collagen I and III and Fibronectin (FN), suggesting that hsa-miR31-5p knockdown effectively reduces HS formation caused by excessive ECM synthesis and deposition in HSFBs under hypoxia. Mechanism study showed that the regulation of HS formation by hsa-miR31-5p was mediated by its target gene, factor-inhibiting HIF-1 (FIH): under hypoxia, hsa-miR31-5p down-regulated FIH and thus increased the level of hypoxia inducible factor-1α (HIF-1α), which subsequently activated the HIF-1α fibrosis regulation pathway in HSFBs, and stimulated the proliferation and ECM synthesis in HSFBs, eventually resulting in fibrosis and scar formation. The data also show that knockdown of hsa-miR31-5p in HSFBs impaired the trend of increased proliferation, reduced invasion and excessive ECM synthesis and deposition caused by HIF-1a activation under hypoxia through upregulating FIH, indicating that knockdown of hsa-miR31-5p effectively inhibits the formation of HS. In conclusion, hsa-miR31 -5p plays an important role in HS formation by inhibiting FIH and regulating the HIF-1α pathway. Therefore, hsa-miR31 -5p may be a novel therapeutic target for HS.

60 APPLIED LIFE SCIENCES↗