Engineering Papers⌕ Search

Engineering topics

Wang, W

Publications and source records attributed to Wang, W.

At least 37 records · Page 2

SU-E-J-119: What Effect Have the Volume Defined in the Alignment Clipbox for Cervical Cancer Using Automatic Registration Methods for Cone- Beam CT Verification?

Purpose: To investigate the impact of different clipbox volumes with automated registration techniques using commercially available software with on board volumetric imaging(OBI) for treatment verification in cervical cancer patients. Methods: Fifty cervical cancer patients received daily CBCT scans(on-board imaging v1.5 system, Varian Medical Systems) during the first treatment week and weekly thereafter were included this analysis. A total of 450 CBCT scans were registered to the planning CTscan using pelvic clipbox(clipbox-Pelvic) and around PTV clip box(clipbox- PTV). The translations(anterior-posterior, left-right, superior-inferior) and the rotations(yaw, pitch and roll) errors for each matches were recorded. The setup errors and the systematic and random errors for both of the clip-boxes were calculated. Paired Samples t test was used to analysis the differences between clipbox-Pelvic and clipbox-PTV. Results: . The SD of systematic error(σ) was 1.0mm, 2.0mm,3.2mm and 1.9mm,2.3mm, 3.0mm in the AP, LR and SI directions for clipbox-Pelvic and clipbox-PTV, respectively. The average random error(Σ)was 1.7mm, 2.0mm,4.2mm and 1.7mm,3.4mm, 4.4mm in the AP, LR and SI directions for clipbox-Pelvic and clipbox-PTV, respectively. But, only the SI direction was acquired significantly differences between two image registration volumes(p=0.002,p=0.01 for mean and SD). For rotations, the yaw mean/SD and the pitch SD were acquired significantly differences between clipbox-Pelvic and clipbox-PTV. Conclusion: The defined volume for Image registration is important for cervical cancer when 3D/3D match was used. The alignment clipbox can effect the setup errors obtained. Further analysis is need to determine the optimal defined volume to use the image registration in cervical cancer. Conflict of interest: none.

60 APPLIED LIFE SCIENCES↗

Can intra-aggregate pore structures affect the aggregate's effectiveness in protecting carbon?

Aggregates are known to provide physical protection to soil organic matter shielding it from rapid decomposition. Spatial arrangement and size distribution of intra-aggregate pores play an important role in this process. This study examined relationships between intra-aggregate pores measured using X-ray computed micro-tomography images and concentrations of total C in 4–6 mm macro-aggregates from two contrasting land use and management practices, namely, conventionally tilled and managed row crop agricultural system (CT) and native succession vegetation converted from tilled agricultural land in 1989 (NS). Previous analyses of these aggregates indicated that small (<15 μm) and large (>100 μm) pores prevail in NS aggregates while medium (30–90 μm) pores are more abundant in CT aggregates (Kravchenko et al., 2011; Wang et al., 2012). We hypothesized that these differences in pore size distributions affect the ability of macro-aggregates to protect C. The results of this study supported this hypothesis. Consistent with greater heterogeneity of pore distributions within NS aggregates we observed higher total C and greater intra-aggregate C variability in NS as compared with CT aggregates. Total C concentrations and intra-aggregate C standard deviations were negatively correlated with fractions of medium sized pores, indicating that presence of such pores was associated with lower but more homogeneously distributed total C. While total C was positively correlated with presence of small and large pores. The results suggest that because of their pore structure NS macro-aggregates provide more effective physical protection to C than CT aggregates.

Ananyeva, K↗

50% Advanced Energy Design Guides: Preprint

This paper presents the process, methodology, and assumptions for the development of the 50% Energy Savings Advanced Energy Design Guides (AEDGs), a design guidance document that provides specific recommendations for achieving 50% energy savings above the requirements of ANSI/ASHRAE/IESNA Standard 90.1-2004 in four building types: 1. Small to medium office buildings, 2. K-12 school buildings, 3.Medium to big box retail buildings, 4. Large hospital buildings.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Amorphous iron-(hydr) oxide networks at liquid/vapor interfaces: In situ X-ray scattering and spectroscopy studies

Surface sensitive X-ray reflectivity (XR), fluorescence (XF), and grazing incidence X-ray diffraction (GIXD) experiments were conducted to determine the accumulation of ferric iron Fe (III) or ferrous iron Fe (II) under dihexadecyl phosphate (DHDP) or arachidic acid (AA) Langmuir monolayers at liquid/vapor interfaces. Analysis of the X-ray reflectivity and fluorescence data of monolayers on the aqueous subphases containing FeCl3 indicates remarkably high levels of surface-bound Fe (III) in number of Fe3þ ions per molecule (DHDP or AA) that exceed the amount necessary to neutralize a hypothetically completely deprotonated monolayer (DHDP or AA). These results suggest that nano-scale iron (hydr) oxide complexes (oxides, hydroxides or oxyhydroxides) bind to the headgroups and effectively overcompensate the maximum possible charges at the interface. The lack of evidence of in-plane ordering in GIXD measurements and strong effects on the surface-pressure versus molecular area isotherms indicate that an amorphous network of iron (hydr) oxide complexes contiguous to the headgroups is formed. Similar experiments with FeCl2 generally resulted with the oxidation of Fe (II)–Fe (III) which consequently leads to ferric Fe (III) complexes binding albeit with less iron at the interface. Controlling the oxidation of Fe (II) changes the nature and amount of binding significantly. The implications to biomineralization of iron (hydr) oxides are briefly discussed.

36 MATERIALS SCIENCE↗

Molecular beam epitaxy growth of high quality p-doped SnS van der Waals epitaxy on a graphene buffer layer

We report on the systematic investigation of optoelectronic properties of tin (IV) sulfide (SnS) van der Waals epitaxies (vdWEs) grown by molecular beam epitaxy (MBE) technique. Energy band simulation using commercial CASTEP code indicates that SnS has an indirect bandgap of size 0.982 eV. Furthermore, our simulation shows that elemental Cu can be used as a p-type dopant for the material. Growth of high quality SnS thin films is accomplished by MBE technique using graphene as the buffer layer. We observed significant reduction in the rocking curve FWHM over the existing published values. Crystallite size in the range of 2-3 {mu}m is observed which is also significantly better than the existing results. Measurement of the absorption coefficient, {alpha}, is performed using a Hitachi U-4100 Spectrophotometer system which demonstrate large values of {alpha} of the order of 10{sup 4} cm{sup -1}. Sharp cutoff in the values of {alpha}, as a function of energy, is observed for the films grown using a graphene buffer layer indicating low concentration of localized states in the bandgap. Cu-doping is achieved by co-evaporation technique. It is demonstrated that the hole concentration of the films can be controlled between 10{sup 16} cm{sup -3} and 5 x 10{sup 17}cm{sup -3} by varying the temperature of the Cu K-cell. Hole mobility as high as 81 cm{sup 2}V{sup -1}s{sup -1} is observed for SnS films on graphene/GaAs(100) substrates. The improvements in the physical properties of the films are attributed to the unique layered structure and chemically saturated bonds at the surface for both SnS and the graphene buffer layer. Consequently, the interaction between the SnS thin films and the graphene buffer layer is dominated by van der Waals force and structural defects at the interface, such as dangling bonds or dislocations, are substantially reduced.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

RADIO-TO-TeV PHASE-RESOLVED EMISSION FROM THE CRAB PULSAR: THE ANNULAR GAP MODEL

The Crab pulsar is a quite young, famous pulsar that radiates multi-wavelength pulsed photons. The latest detection of GeV and TeV pulsed emission with an unprecedented signal-to-noise ratio, supplied by the powerful telescopes Fermi, MAGIC, and VERITAS, challenges the current popular pulsar models, and can be a valuable discriminator to justify the pulsar high-energy-emission models. Our work is divided into two steps. First, taking reasonable parameters (the magnetic inclination angle {alpha} = 45 Degree-Sign and the view angle {zeta} = 63 Degree-Sign ), we use the latest high-energy data to calculate radio, X-ray, {gamma}-ray, and TeV light curves from a geometric view to obtain crucial information on emission locations. Second, we calculate the phase-averaged spectrum and phase-resolved spectra for the Crab pulsar and take a theoretical justification from a physical view for the emission properties as found in the first step. It is found that a Gaussian emissivity distribution with the peak emission near the null charge surface in the so-called annular gap (AG) region gives the best modeled light curves. The pulsed radio, X-ray, {gamma}-ray, and TeV emission are mainly generated from the emission of primary particles or secondary particles with different emission mechanisms in the nearly similar region of the AG located in the only magnetic pole, which leads to the nearly 'phase-aligned' multi-wavelength light curves. The emission of peak 1 and peak 2 originates from the AG region near the null charge surface, while the emission of the bridge primarily originates from the core gap (CG) region. The charged particles cannot co-rotate with the pulsar and escape from the magnetosphere, which determines the original flowing primary particles. The acceleration electric field and potential in the AG and CG are huge enough and are in the several tens of neutron star radii. Thus, the primary particles are accelerated to ultra-relativistic energies and produce numerous secondary particles (pairs) in the inner regions of the AG and CG. We emphasize that there are mainly two types of pairs: one is curvature-radiation induced (CR-induced) and the other is inverse-Compton-scattering induced (ICS-induced). The phase-averaged spectrum and phase-resolved spectra from soft X-ray to TeV bands are produced by four components: synchrotron radiation from CR- and ICS-induced pairs dominates the X-ray band to soft {gamma}-ray band (100 eV to 10 MeV); curvature radiation and synchrotron radiation from the primary particles mainly contribute to the {gamma}-ray band (10 MeV to {approx}20 GeV); ICS from the pairs significantly contributes to the TeV {gamma}-ray band ({approx}20-400 GeV). The multi-wavelength pulsed emission from the Crab pulsar can be well modeled with the AG and CG model. To distinguish our single magnetic pole model from two-pole models, the convincing values of the magnetic inclination angle and the viewing angle will play a key role.

79 ASTRONOMY AND ASTROPHYSICS↗

MP-Pic simulation of CFB riser with EMMS-based drag model

MP-PIC (multi-phase particle in cell) method combined with the EMMS (energy minimization multi- scale) drag force model was implemented with the open source program MFIX to simulate the gas–solid flows in CFB (circulatingfluidizedbed) risers. Calculated solid flux by the EMMS drag agrees well with the experimental value; while the traditional homogeneous drag over-predicts this value. EMMS drag force model can also predict the macro-and meso-scale structures. Quantitative comparison of the results by the EMMS drag force model and the experimental measurements show high accuracy of the model. The effects of the number of particles per parcel and wall conditions on the simulation results have also been investigated in the paper. This work proved that MP-PIC combined with the EMMS drag model can successfully simulate the fluidized flows in CFB risers and it serves as a candidate to realize real-time simulation of industrial processes in the future.

97 MATHEMATICS AND COMPUTING↗

Radial transport of energetic ions in the presence of trapped electron mode turbulence

The nature of transport of hot ions is studied in the presence of microturbulence generated by the trapped electron mode in a Tokamak using massively parallel, first principle based global nonlinear gyrokinetic simulation, and with the help of a passive tracer method. Passing and trapped hot ions are observed to exhibit inverse and inverse square scaling with energy, while those with isotropic pitch distribution are found to exhibit inverse dependence on energy. For all types of hot ions, namely, isotropic, passing, and trapped, the radial transport appears to be subdiffusive for the parameters considered.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Gyrokinetic Particle Simulation of Turbulent Transport in Burning Plasmas

The three-year project GPS-TTBP resulted in over 152 publications and 135 presentations. This summary focuses on the scientific progress made by the project team. A major focus of the project was on the physics intrinsic rotation in tokamaks. Progress included the first ever flux driven study of net intrinsic spin-up, mediated by boundary effects (in collaboration with CPES), detailed studies of the microphysics origins of the Rice scaling, comparative studies of symmetry breaking mechanisms, a pioneering study of intrinsic torque driven by trapped electron modes, and studies of intrinsic rotation generation as a thermodynamic engine. Validation studies were performed with C-Mod, DIII-D and CSDX. This work resulted in very successful completion of the FY2010 Theory Milestone Activity for OFES, and several prominent papers of the 2008 and 2010 IAEA Conferences. A second major focus was on the relation between zonal flow formation and transport non-locality. This culminated in the discovery of the ExB staircase - a conceptually new phenomenon. This also makes useful interdisciplinary contact with the physics of the PV staircase, well-known in oceans and atmospheres. A third topic where progress was made was in the simulation and theory of turbulence spreading. This work, now well cited, is important for understanding the dynamics of non-locality in turbulent transport. Progress was made in studies of conjectured non-diffusive transport in trapped electron turbulence. Pioneering studies of ITB formation, coupling to intrinsic rotation and hysteresis were completed. These results may be especially significant for future ITER operation. All told, the physics per dollar performance of this project was quite good. The intense focus was beneficial and SciDAC resources were essential to its success.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Are upwind techniques in multi-phase flow models necessary?

Two alternatives of primary variables are compared for two-phase flow in heterogeneous media by solving fully established benchmarks. The first combination utilizes pressure of the wetting fluid and saturation of the non-wetting fluid as primary variables, while the second employs capillary pressure of the wetting fluid and pressure of the non-wetting fluid. While the standard Galerkin finite element method (SGFEM) is known to fail in the physical reproduction of two-phase flow in heterogeneous media (unless employing a fully upwind correction), the second scheme with capillary pressure as a primary variable without applying an upwind technique produces correct physical fluid behaviour in heterogeneous media, as observed from experiments.

97 MATHEMATICS AND COMPUTING↗

Hierarchical nanomorphologies promote exciton dissociation in polymer/fullerene bulk heterojunction solar cells.

PTB7 semiconducting copolymer comprising thieno[3,4-b]thiophene and benzodithiophene alternating repeat units set a historic record of solar energy conversion efficiency (7.4%) in polymer/fullerene bulk heterojunction solar cells. To further improve solar cell performance, a thorough understanding of structure-property relationships associated with PTB7/fullerene and related organic photovoltaic (OPV) devices is crucial. Traditionally, OPV active layers are viewed as an interpenetrating network of pure polymers and fullerenes with discrete interfaces. Here we show that the active layer of PTB7/fullerene OPV devices in fact involves hierarchical nanomorphologies ranging from several nanometers of crystallites to tens of nanometers of nanocrystallite aggregates in PTB7-rich and fullerene-rich domains, themselves hundreds of nanometers in size. These hierarchical nanomorphologies are coupled to significantly enhanced exciton dissociation, which consequently contribute to photocurrent, indicating that the nanostructural characteristics at multiple length scales is one of the key factors determining the performance of PTB7 copolymer, and likely most polymer/fullerene systems, in OPV devices.

14 SOLAR ENERGY↗