Engineering Papers⌕ Search

Engineering topics

Wang, Song

Publications and source records attributed to Wang, Song.

At least 55 records · Page 3

Machine Learning Applied to Star–Galaxy–QSO Classification and Stellar Effective Temperature Regression

In modern astrophysics, machine learning has increasingly gained popularity with its incredibly powerful ability to make predictions or calculated suggestions for large amounts of data. We describe an application of the supervised machine-learning algorithm, random forests (RF), to the star/galaxy/QSO classification and the stellar effective temperature regression based on the combination of Large Sky Area Multi-Object Fiber Spectroscopic Telescope and Sloan Digital Sky Survey spectroscopic data. This combination enables us to obtain reliable predictions with one of the largest training samples ever used. The training samples are built with a nine-color data set of about three million objects for the classification and a seven-color data set of over one million stars for the regression. The performance of the classification and regression is examined with validation and blind tests on the objects in the RAdial Velocity Extension, 6dFGS, UV-bright Quasar Survey and Apache Point Observatory Galactic Evolution Experiment surveys. We demonstrate that RF is an effective algorithm, with classification accuracies higher than 99% for stars and galaxies, and higher than 94% for QSOs. These accuracies are higher than machine-learning results in former studies. The total standard deviations of the regression are smaller than 200 K, which is similar to those of some spectrum-based methods. The machine-learning algorithm with the broad-band photometry provides us with a more efficient approach for dealing with massive amounts of astrophysical data than do traditional color cuts and spectral energy distribution fits.

79 ASTRONOMY AND ASTROPHYSICS↗

Continuously Tunable Pore Size for Gas Separation via a Bilayer Nanoporous Graphene Membrane

We report that pore size is a crucial factor impacting gas separation, but difficult to control for a single-layer nanoporous graphene membrane. Here, we propose a bilayer design of a nanoporous graphene membrane with a continuously tunable effective pore size, by shifting the lateral position of one graphene layer against the other. Molecular dynamics simulations of gas permeation reveal that selective separation of gases, such as CO 2 , N 2 , and CH 4 , of 3–4 Å in kinetic diameter can be achieved for a bilayer membrane from single-layer pores as large as 25 Å in size. Hence, this bilayer design allows both great flexibility of pore sizes in a single layer of graphene and continuous variation of the effective pore size through the bilayer at a sub-ångstrom level.

36 MATERIALS SCIENCE↗

Effect of pore density on gas permeation through nanoporous graphene membranes

Pore density is an important factor dictating gas separations through one-atom-thin nanoporous membranes, but how it influences the gas permeation is not fully understood. We use molecular dynamics (MD) simulations to investigate gas permeation through nanoporous graphene membranes with the same pore size (3.0 Å × 3.8 Å in dimensions) but varying pore densities (from 0.01 to 1.28 nm -2 ). We find that higher pore density leads to higher permeation per unit area of membrane for both CO 2 and He, but the rate of the increase decreases greatly for CO 2 at high pore densities. As a result, the per-pore permeance decreases for CO 2 but remains relatively constant for He with the pore density, leading to a dramatic change in CO 2 /He selectivity. By separating the total flux into direct flux and surface flux, we find that He permeation is dominated by direct flux and hence the per-pore permeation rate is roughly constant with the pore density. In contrast, CO 2 permeation is dominated by surface flux and the overall decreasing trend of the per-pore permeation rate of CO 2 with the pore density can be explained by the decreasing per-pore coverage of CO 2 on the feed side with the pore density. Finally, our work now provides a complete picture of the pore-density dependence of gas permeation through one-atom-thin nanoporous membranes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Study on Tribological Properties of CoCrMo Alloys against Metals and Ceramics as Bearing Materials for Artificial Cervical Disc

CoCrMo alloys are believed to be a kind of potential material for artificial cervical disc. However, the tribological properties of CoCrMo alloys against different metals and ceramics are not systematically studied. In this study, the tribological behaviors of CoCrMo alloys against metals (316L, Ti6Al4V) and ceramics (Si{sub 3}N{sub 4}, ZrO{sub 2}) were focused under dry friction and 25 wt.% newborn calf serum (NCS)-lubricated conditions using a ball-on-disc apparatus under reciprocating motion. The microstructure, composition and hardness of CoCrMo alloys were characterized using x-ray diffraction, scanning electron microscopy (SEM) and hardness testers, respectively. The contact angles of the CoCrMo alloys with deionized water and 25 wt.% NCS were measured by the OCA contact angle measuring instrument. The maximum wear width, wear depth and wear volume were measured by three-dimensional white light interference. The morphology and the EDX analysis of the wear marks on CoCrMo alloys were examined by SEM to determine the basic mechanism of friction and wear. The dominant wear mechanism in dry friction for CoCrMo alloys against all pairings was severe abrasive wear, accompanied with a lot of material transfer. Under 25 wt.% NCS-lubricated condition, the wear mechanism for CoCrMo alloys against ceramics (Si{sub 3}N{sub 4}, ZrO{sub 2}) was also mainly severe abrasive wear. However, severe abrasive wear and electrochemical corrosion occurred for the CoCrMo-316L pairing under lubrication. Severe abrasive wear, adhesive wear and electrochemical corrosion occurred for the CoCrMo-Ti6Al4V pairing under lubrication. According to the results, the tribological properties of CoCrMo alloys against ceramics were better than those against metals. The CoCrMo-ZrO{sub 2} pairing displayed the best tribological behaviors and could be taken as a potential candidate bearing material for artificial cervical disc.

36 MATERIALS SCIENCE↗

Optimal Size of a Cylindrical Pore for Post-Combustion CO 2 Capture

Pore size is an essential factor in controlling gas sorption in porous separation media. The overlap of the potential energy surface (PES) of CO 2 interacting with a cylindrical pore wall can be used to tune gas sorption inside a porous material, but how such overlap can benefit post-combustion CO 2 capture has not been fully addressed from a computational perspective. Here we use van der Waals density functional (vdW-DF) theory to assess the overlap of PES of CO 2 inside cylindrical pores as represented by carbon nanotubes (CNTs) of different diameters. Then we employ grand-canonical Monte Carlo simulations to obtain the adsorption capacity and selectivity of a CO 2 /N 2 mixture with a CO 2 partial pressure of 0.15 bar at room temperature. We find that the maximum PES overlap and maximum amount of CO 2 adsorbed are both achieved at a CNT diameter or cylindrical pore size of 7.8 Å, which corresponds to an accessible pore size of 4.4 Å. A further investigation of N2 adsorption corroborates the idea of PES overlap. GCMC simulations reveal that a maximum CO 2 /N 2 selectivity of ~33 is reached at a CNT diameter of 7.05 Å for the gas mixture. Here, this work suggests that a cylindrical pore size between 7 and 8 Å would be most beneficial for post-combustion CO 2 capture from overlap of PES.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

SRF Systems for the Jefferson Lab Electron Ion Collider (JLEIC)

We report on the development of new CW SRF systems for the colliding rings of a proposed electron-ion collider (EIC) at Jlab. Jefferson Lab is developing new strongly HOM-damped SRF cavities for the ion collider ring and a high-energy electron cooler at 952.6 MHz. The baseline design JLEIC will re-use the PEP-II 476 MHz cavities for the electron ring with a possible future upgrade to 952.6 MHz SRF cavities at a later date. We discuss the design optimization of the new high current cavities and compare options for the strong HOM damping required. A concept for a modular cryostat to house these various cavities will be shown, and an overview of the challenging high-level parameters will be presented. These designs and concepts may be useful in other high current storage rings and ERLs.

Rimmer, Robert↗

Design of Calix-Based Cages for CO 2 Capture

Cage compounds offer a unique opportunity to capture CO 2 , but a perfect design has been elusive. Herein, we computationally designed cage compounds by using linkers to connect two calix[4]pyrrole units together into a cage for capturing CO 2 . Quantum mechanical calculations based on dispersion-corrected density functional theory show that the -(CH 2 ) n – linker has an optimal length at n = 5 where the N–H groups from the pyrrole molecules form four H···O interactions with the two terminal O atoms of CO 2 . The cationic and zwitterionic cages can also achieve high CO 2 affinity and CO 2 /N 2 selectivity in the cage cavity compared with previously synthesized cages. Based on the computed potential energy curves of gas entering the cage, we conclude that all the cages are easily accessible by CO 2 . This work shows that the calix-based cages have great potential for selective CO 2 capture.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

CHANDRA ACIS SURVEY OF X-RAY POINT SOURCES IN NEARBY GALAXIES. II. X-RAY LUMINOSITY FUNCTIONS AND ULTRALUMINOUS X-RAY SOURCES

Based on the recently completed Chandra /ACIS survey of X-ray point sources in nearby galaxies, we study the X-ray luminosity functions (XLFs) for X-ray point sources in different types of galaxies and the statistical properties of ultraluminous X-ray sources (ULXs). Uniform procedures are developed to compute the detection threshold, to estimate the foreground/background contamination, and to calculate the XLFs for individual galaxies and groups of galaxies, resulting in an XLF library of 343 galaxies of different types. With the large number of surveyed galaxies, we have studied the XLFs and ULX properties across different host galaxy types, and confirm with good statistics that the XLF slope flattens from lenticular ( α ∼ 1.50 ± 0.07) to elliptical (∼1.21 ± 0.02), to spirals (∼0.80 ± 0.02), to peculiars (∼0.55 ± 0.30), and to irregulars (∼0.26 ± 0.10). The XLF break dividing the neutron star and black hole binaries is also confirmed, albeit at quite different break luminosities for different types of galaxies. A radial dependency is found for ellipticals, with a flatter XLF slope for sources located between D {sub 25} and 2 D {sub 25}, suggesting the XLF slopes in the outer region of early-type galaxies are dominated by low-mass X-ray binaries in globular clusters. This study shows that the ULX rate in early-type galaxies is 0.24 ± 0.05 ULXs per surveyed galaxy, on a 5 σ confidence level. The XLF for ULXs in late-type galaxies extends smoothly until it drops abruptly around 4 × 10{sup 40} erg s{sup −1}, and this break may suggest a mild boundary between the stellar black hole population possibly including 30 M {sub ⊙} black holes with super-Eddington radiation and intermediate mass black holes.

79 ASTRONOMY AND ASTROPHYSICS↗

Lactobacillus casei as a biocatalyst for biofuel production

Abstract Microbial fermentation of sugars from plant biomass to alcohols represents an alternative to petroleum-based fuels. The optimal biocatalyst for such fermentations needs to overcome hurdles such as high concentrations of alcohols and toxic compounds. Lactic acid bacteria, especially lactobacilli, have high innate alcohol tolerance and are remarkably adaptive to harsh environments. This study assessed the potential of five Lactobacillus casei strains as biocatalysts for alcohol production. L. casei 12A was selected based upon its innate alcohol tolerance, high transformation efficiency and ability to utilize plant-derived carbohydrates. A 12A derivative engineered to produce ethanol (L. casei E1) was compared to two other bacterial biocatalysts. Maximal growth rate, maximal optical density and ethanol production were determined under conditions similar to those present during alcohol production from lignocellulosic feedstocks. L. casei E1 exhibited higher innate alcohol tolerance, better growth in the presence of corn stover hydrolysate stressors, and resulted in higher ethanol yields.

Vinay-Lara, Elena↗

CHANDRA ACIS SURVEY OF X-RAY POINT SOURCES: THE SOURCE CATALOG

The Chandra archival data is a valuable resource for various studies on different X-ray astronomy topics. In this paper, we utilize this wealth of information and present a uniformly processed data set, which can be used to address a wide range of scientific questions. The data analysis procedures are applied to 10,029 Advanced CCD Imaging Spectrometer observations, which produces 363,530 source detections belonging to 217,828 distinct X-ray sources. This number is twice the size of the Chandra Source Catalog (Version 1.1). The catalogs in this paper provide abundant estimates of the detected X-ray source properties, including source positions, counts, colors, fluxes, luminosities, variability statistics, etc. Cross-correlation of these objects with galaxies shows that 17,828 sources are located within the D {sub 25} isophotes of 1110 galaxies, and 7504 sources are located between the D {sub 25} and 2 D {sub 25} isophotes of 910 galaxies. Contamination analysis with the log N –log S relation indicates that 51.3% of objects within 2 D {sub 25} isophotes are truly relevant to galaxies, and the “net” source fraction increases to 58.9%, 67.3%, and 69.1% for sources with luminosities above 10{sup 37}, 10{sup 38}, and 10{sup 39} erg s{sup −1}, respectively. Among the possible scientific uses of this catalog, we discuss the possibility of studying intra-observation variability, inter-observation variability, and supersoft sources (SSSs). About 17,092 detected sources above 10 counts are classified as variable in individual observation with the Kolmogorov–Smirnov (K–S) criterion ( P {sub K–S} < 0.01). There are 99,647 sources observed more than once and 11,843 sources observed 10 times or more, offering us a wealth of data with which to explore the long-term variability. There are 1638 individual objects (∼2350 detections) classified as SSSs. As a quite interesting subclass, detailed studies on X-ray spectra and optical spectroscopic follow-up are needed to categorize these SSSs and pinpoint their properties. In addition, this survey can enable a wide range of statistical studies, such as X-ray activity in different types of stars, X-ray luminosity functions in different types of galaxies, and multi-wavelength identification and classification of different X-ray populations.

79 ASTRONOMY AND ASTROPHYSICS↗

Predictive features of ligand-specific signaling through the estrogen receptor

Some estrogen receptor-α (ERα)-targeted breast cancer therapies such as tamoxifen have tissue-selective or cell-specific activities, while others have similar activities in different cell types. To identify biophysical determinants of cell-specific signaling and breast cancer cell proliferation, we synthesized 241 ERα ligands based on 19 chemical scaffolds, and compared ligand response using quantitative bioassays for canonical ERα activities and X-ray crystallography. Ligands that regulate the dynamics and stability of the coactivator-binding site in the C-terminal ligand-binding domain, called activation function-2 (AF-2), showed similar activity profiles in different cell types. Such ligands induced breast cancer cell proliferation in a manner that was predicted by the canonical recruitment of the coactivators NCOA1/2/3 and induction of the GREB1 proliferative gene. For some ligand series, a single inter-atomic distance in the ligand-binding domain predicted their proliferative effects. In contrast, the N-terminal coactivator-binding site, activation function-1 (AF-1), determined cell-specific signaling induced by ligands that used alternate mechanisms to control cell proliferation. Thus, incorporating systems structural analyses with quantitative chemical biology reveals how ligands can achieve distinct allosteric signaling outcomes through ERα.

59 BASIC BIOLOGICAL SCIENCES↗

Cross-Domain Recognition by Identifying Joint Subspaces of Source Domain and Target Domain

This paper introduces here a new method to solve the cross-domain recognition problem. Different from the traditional domain adaption methods which rely on a global domain shift for all classes between the source and target domains, the proposed method is more flexible to capture individual class variations across domains. By adopting a natural and widely used assumption that the data samples from the same class should lay on an intrinsic low-dimensional subspace, even if they come from different domains, the proposed method circumvents the limitation of the global domain shift, and solves the cross-domain recognition by finding the joint subspaces of the source and target domains. Specifically, given labeled samples in the source domain, we construct a subspace for each of the classes. Then we construct subspaces in the target domain, called anchor subspaces, by collecting unlabeled samples that are close to each other and are highly likely to belong to the same class. The corresponding class label is then assigned by minimizing a cost function which reflects the overlap and topological structure consistency between subspaces across the source and target domains, and within the anchor subspaces, respectively. We further combine the anchor subspaces to the corresponding source subspaces to construct the joint subspaces. Subsequently, one-versus-rest support vector machine classifiers are trained using the data samples belonging to the same joint subspaces and applied to unlabeled data in the target domain. We evaluate the proposed method on two widely used datasets: 1) object recognition dataset for computer vision tasks and 2) sentiment classification dataset for natural language processing tasks. Comparison results demonstrate that the proposed method outperforms the comparison methods on both datasets.

97 MATHEMATICS AND COMPUTING↗

Visual-Attention-Based Background Modeling for Detecting Infrequently Moving Objects

Motion is one of the most important cues to separate foreground objects from the background in a video. Using a stationary camera, it is usually assumed that the background is static, while the foreground objects are moving most of the time. However, in practice, the foreground objects may show infrequent motions, such as abandoned objects and sleeping persons. Meanwhile, the background may contain frequent local motions, such as waving trees and/or grass. Such complexities may prevent the existing background subtraction algorithms from correctly identifying the foreground objects. We propose a new approach that can detect the foreground objects with frequent and/or infrequent motions. Specifically, we use a visual-attention mechanism to infer a complete background from a subset of frames and then propagate it to the other frames for accurate background subtraction. Furthermore, we develop a feature-matching-based local motion stabilization algorithm to identify frequent local motions in the background for reducing false positives in the detected foreground. The proposed approach is fully unsupervised, without using any supervised learning for object detection and tracking. Extensive experiments on a large number of videos have demonstrated that the proposed approach outperforms the state-of-the-art motion detection and background subtraction methods in comparison.

42 ENGINEERING↗

TWO CANDIDATE OPTICAL COUNTERPARTS OF M82 X-1 FROM HST OBSERVATIONS

Optical counterparts can provide significant constraints on the physical nature of ultraluminous X-ray sources (ULXs). In this Letter, we identify six point sources in the error circle of a ULX in M82, namely M82 X-1, by registering Chandra positions onto Hubble Space Telescope images. Two objects are considered as optical counterpart candidates of M82 X-1, which show F658N flux excess compared to the optical continuum that may suggest the existence of an accretion disk. The spectral energy distributions of the two candidates match well with the spectra for supergiants, with stellar types as F5-G0 and B5-G0, respectively. Deep spatially resolved spectroscopic follow-up and detailed studies are needed to identify the true companion and confirm the properties of this BH system.

79 ASTRONOMY AND ASTROPHYSICS↗

AN UPDATED ULTRAVIOLET CATALOG OF GALEX NEARBY GALAXIES

The ultraviolet (UV) catalog of nearby galaxies compiled by Gil de Paz et al. presents the integrated photometry and surface brightness profiles for 1034 nearby galaxies observed by GALEX. We provide an updated catalog of 4138 nearby galaxies based on the latest Genral Release (GR6/GR7) of GALEX. These galaxies are selected from HyperLeda with apparent diameters larger than 1′. From the surface brightness profiles accurately measured using the deep NUV and FUV images, we have calculated the asymptotic magnitudes, aperture (D25) magnitudes, colors, structural parameters (effective radii and concentration indices), luminosities, and effective surface brightness for these galaxies. Archival optical and infrared photometry from HyperLeda, 2MASS, and IRAS are also integrated into the catalog. Our parameter measurements and some analyses are consistent with those of Paz et al. The (FUV − K) color provides a good criterion to distinguish between early- and late-type galaxies, which can be improved further using the concentration indices. The IRX–β relation is reformulated with our UV-selected nearby galaxies.

79 ASTRONOMY AND ASTROPHYSICS↗

SPECTROSCOPIC STUDIES OF AN ULTRALUMINOUS SUPERSOFT X-RAY SOURCE IN M81

Ultraluminous supersoft X-ray sources (ULSs) exhibit supersoft X-ray spectra with blackbody temperatures below 0.1 keV and bolometric luminosities above 10{sup 39} ergs s{sup −1}. In this Letter, we report the first optical spectroscopic observations of a ULS in M81 using the LRIS spectrograph on the Keck I telescope. The detected Balmer emission lines show a mean intrinsic velocity dispersion of 400 ± 80 km s{sup −1}, which is consistent with that from an accretion disk. The spectral index of the continuum on the blue side is also consistent with the multi-color disk model. The H{sub α} emission line exhibits a velocity of ∼180 km s{sup −1} relative to the local stellar environment, suggesting that this ULS may be a halo system in M81 belonging to an old population. No significant shift is found for the H{sub α} emission line between two observations separated by four nights.

79 ASTRONOMY AND ASTROPHYSICS↗

Sub-band transport mechanism and switching properties for resistive switching nonvolatile memories with structure of silver/aluminum oxide/p-type silicon

In this paper, we discuss a model of sub-band in resistive switching nonvolatile memories with a structure of silver/aluminum oxide/p-type silicon (Ag/Al{sub x}O{sub y}/p-Si), in which the sub-band is formed by overlapping of wave functions of electron-occupied oxygen vacancies in Al{sub x}O{sub y} layer deposited by atomic layer deposition technology. The switching processes exhibit the characteristics of the bipolarity, discreteness, and no need of forming process, all of which are discussed deeply based on the model of sub-band. The relationships between the SET voltages and distribution of trap levels are analyzed qualitatively. The semiconductor-like behaviors of ON-state resistance affirm the sub-band transport mechanism instead of the metal filament mechanism.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗