Engineering Papers⌕ Search

Engineering topics

Wang, S.

Publications and source records attributed to Wang, S..

At least 109 records · Page 6

Influence of resonant magnetic perturbations and induced islands on plasma rotations and turbulence properties in the J-TEXT tokamak

Dedicated experiments have been carried out at the J-TEXT tokamak for investigating plasma responses to the externally applied resonant magnetic perturbation (RMP) field with various RMP currents under four different toroidal phases. After its penetration, the dominant component of the RMP resonated at q =2 surface and excited an m/n =2/1 magnetic island, which rotated poloidally when changing the toroidal phase of the RMP. The experimental results show significant influence of the RMP on plasma toroidal and perpendicular rotations, density fluctuations and geodesic acoustic modes (GAMs) as well as nonlinear interaction of ambient turbulence. Whereas the plasma rotations do not show big difference at the RMP-induced island O- and X-point, the turbulence level is substantially lower at the island O-point due to reduced local temperature gradient. The GAM zonal flows outside the island area are profoundly affected by the RMP in various RMP phases. Furthermore, it was found that under certain RMP currents the nonlinear coupling of ambient turbulence was considerably enhanced, no matter of at the island O- or X-point. The results suggest a possible controlling role of the RMP in regulating the nonlinear interplay of electrostatic turbulence.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The two-fluid dynamics and energetics of the asymmetric magnetic reconnection in laboratory and space plasmas

Magnetic reconnection is a fundamental process in magnetized plasma where magnetic energy is converted to plasma energy. Despite huge differences in the physical size of the reconnection layer, remarkably similar characteristics are observed in both laboratory and magnetosphere plasmas. Here we present the comparative study of the dynamics and physical mechanisms governing the energy conversion in the laboratory and space plasma in the context of two-fluid physics, aided by numerical simulations. In strongly asymmetric reconnection layers with negligible guide field, the energy deposition to electrons is found to primarily occur in the electron diffusion region where electrons are demagnetized and diffuse. A large potential well is observed within the reconnection plane and ions are accelerated by the electric field toward the exhaust region. In conclusion, the present comparative study identifies the robust two-fluid mechanism operating in systems over six orders of magnitude in spatial scales and over a wide range of collisionality.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The Two-Fluid Dynamics and Energetics of the Asymmetric Magnetic Reconnection in Laboratory and Space Plasmas

Magnetic reconnection is a fundamental process in magnetized plasma where magnetic energy is converted to plasma energy. Despite huge differences in the physical size of the reconnection layer, remarkably similar characteristics are observed in both laboratory and magnetosphere plasmas. Here we present the comparative study of the dynamics and physical mechanisms governing the energy conversion in the laboratory and space plasma in the context of two-fluid physics, aided by numerical simulations. In strongly asymmetric reconnection layers with negligible guide field, the energy deposition to electrons is found to primarily occur in the electron diffusion region where electrons are demagnetized and diffuse. A large potential well is observed within the reconnection plane and ions are accelerated by the electric field toward the exhaust region. The present comparative study identifies the robust two-fluid mechanism operating in systems over six orders of magnitude in spatial scales and over a wide range of collisionality.

Yamada, M.↗

Effect of the Reconnection Electric Field on Electron Distribution Functions in the Diffusion Region of Magnetotail Reconnection

Abstract Electron distribution functions in the electron diffusion region during symmetric magnetic reconnection are investigated by means of theory and fully kinetic simulations. Crescent‐like striations are formed in distribution functions in the velocity plane perpendicular to the magnetic field. Using an analytical current sheet, we solve the equation of motion for electrons, and derive the shape of a crescent distribution, as a function of the distance from the neutral line, field gradients, and the reconnection electric field. Each crescent is tilted in the velocity plane because of the acceleration by the reconnection electric field, and multiple stripes appear due to multiple meandering bounces. Applying the theory to distribution functions observed in Earth's magnetotail, we deduce the amplitude of the reconnection electric field.

Bessho, N.↗

Nano-phase formation accompanying phase separation in undercooled CoCrCuFeNi-3 at.% Sn high entropy alloy

Highlights: • Undercooled multi-component CoCrCuFeNi-3 at.% Sn high-entropy alloy was studied. • Accompanying phase separation, the nano-precipitates were detected. • The effect of Sn on the microstructures and properties was clarified. • The microhardness increased markedly with the increase of undercooling. - Abstract: Highly undercooled multi-component CoCrCuFeNi-3 at.% Sn high-entropy alloy was studied by adopting molten glass purification combined with cycle superheating methods. Based on the critical undercooling ΔT{sup ⁎}, the characteristic of liquid-phase separation was researched at different undercoolings. Accompanying phase separation, two phases (CoCrFeNi-rich and CuNi-rich) and three kinds of nano-precipitates (CrCo-rich, CrSn-rich and Sn-rich nano-precipitates) were detected. The microhardness of undercooled CoCrCuFeNi-3 at.% Sn high-entropy alloys increased markedly with the increase of undercooling. The effect of Sn on the microstructure evolution and properties in the process of phase separation was clarified with the aid of nano-precipitates.

36 MATERIALS SCIENCE↗

Toroidal modeling of interaction between internal kink mode and plasma flow

Non-linear interaction between the internal kink mode and toroidal plasma rotation is numerically studied using the MARS-Q code. Simulation results show core plasma flow damping due to various toroidal torques, generated by a weakly stable internal kink mode. Here, the 3-D field perturbation induced torques, including the neoclassical toroidal viscous (NTV) torque, as well as that produced by the Maxwell and Reynolds stresses, act as sink terms in the toroidal momentum balance model. The NTV torque is found to play a dominant role in the flow damping in all cases considered in this study. The modification to the internal kink mode structure is observed during the flow damping. Whilst a steady state can be achieved in the coupled mode-flow evolution with a uniform initial flow, a sheared initial flow affects the linear stability of the mode and consequently changes the non-linear evolution. For cases where the steady state solution is achieved, the saturated plasma flow speed critically depends on the initial flow condition as well as the initial amplitude of the internal kink mode but is less sensitive to the on-axis safety factor q0, as long as the latter stays above 1.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The influence of Arctic amplification on mid-latitude summer circulation

Accelerated warming in the Arctic, as compared to the rest of the globe, might have profound impacts on mid-latitude weather. Most studies analyzing Arctic links to mid-latitude weather focused on winter, yet recent summers have seen strong reductions in sea-ice extent and snow cover, a weakened equator-to-pole thermal gradient and associated weakening of the mid-latitude circulation. We review the scientific evidence behind three leading hypotheses on the influence of Arctic changes on mid-latitude summer weather: Weakened storm tracks, shifted jet streams, and amplified quasi-stationary waves. We show that interactions between Arctic teleconnections and other remote and regional feedback processes could lead to more persistent hot-dry extremes in the mid-latitudes. The exact nature of these non-linear interactions is not well quantified but they provide potential high-impact risks for society.

54 ENVIRONMENTAL SCIENCES↗

Observation of Oblique Lower Band Chorus Generated by Nonlinear Three-Wave Interaction

Oblique whistler mode waves have been suggested to play an important role in radiation belt electron dynamics. Recently, Fu et al. [2017] proposed that highly oblique lower band whistler waves could be generated by nonlinear three-wave resonance. Here we present the first observational evidence of such process, using Van Allen Probes data, where an oblique lower band chorus wave is generated by two quasi-parallel waves through nonlinear three-wave interaction. The wave resonance condition is satisfied even in the presence of frequency chirping of one of the pump waves. Different from the simulation results of Fu et al. [2017], simultaneous particle data do not show a plateau in the electron distribution, which could be due to the very weak intensity of the generated waves. These results should help to better understand the generation of oblique waves in the inner magnetosphere and their relative roles in energetic electron dynamics.

79 ASTRONOMY AND ASTROPHYSICS↗

Laser sintering of Al nanoparticles for Al-air batteries

With the growing price of lithium material and associated safety concerns, there is an urgent need for developing new efficient, cost-effective battery systems as a successor for lithium ion batteries. Metal-air batteries have drawn huge attention and interest as energy storage devices due to their high theoretical energy density when Al, Zn, Ni, and Fe are used. In particular, Al-air batteries have the potential to become a promising primary battery system with their relatively low prices and significantly high energy density. In this paper, the authors report a printed Al anode for Al-air battery combined with a laser sintering method. The anode was fabricated by Al nanoparticle ink using squeezing printing. Furthermore, a laser sintering method was applied to remove the organic solvent in the slurry and increase the conductivity of the printed anode. By application of infrared laser sintering, the authors significantly improved electrical conductivity of Al nanoparticles and electrochemical performance of Al-air cells. A Pt/C coated hydrophobicity carbon paper was used for the air cathode to provide a good electrical conductivity, an oxygen flow ability, and the water vapor sealing. Gel-style KOH was introduced as the electrolyte, and waterways were also utilized in the chemical reaction. The authors show a full battery cell with a printed Al anode on flexible substrates. This microbattery can provide a 227 mWh/g energy density and a 239 mAh/g capacity at an operation voltage of 0.95 V.

25 ENERGY STORAGE↗

TRANSIENT BEAM LOADING DUE TO THE BUNCH TRAIN GAP AND ITS COMPENSATION EXPERIMENTS AT BEPC-II AND ALS

Non-uniform bunch fill patterns in storage rings, driven by the need to provide gaps for beam aborting and ion clearing cause a large beam loading change in the RF cavities. The induced turn-periodic transient in the cavity voltage modulates longitudinal beam properties along the train, such as synchronous phase and bunch length. We have carried out beam based experiments on the BEPC-II at IHEP and on the ALS at LBNL, using bunch-by-bunch diagnostic capabilities of the coupled-bunch feedback systems to study this transient effect. A modulated bunch filling pattern with higher charge density around the gap has been demonstrated to be effective in partially compensating this transient modulation. Details of the experimental setups and the data analysis will be presented.

Wang, H.↗

Electron Bulk Acceleration and Thermalization at Earth’s Quasiperpendicular Bow Shock [Electron Acceleration and Thermalization at Earth's Quasi-Perpendicular Bow Shock]

Electron heating at Earth’s quasiperpendicular bow shock has been surmised to be due to the combined effects of a quasistatic electric potential and scattering through wave-particle interaction. Here we report the observation of electron distribution functions indicating a new electron heating process occurring at the leading edge of the shock front. Incident solar wind electrons are accelerated parallel to the magnetic field toward downstream, reaching an electron-ion relative drift speed exceeding the electron thermal speed. The bulk acceleration is associated with an electric field pulse embedded in a whistler-mode wave. The high electron-ion relative drift is relaxed primarily through a nonlinear current-driven instability. Here, the relaxed distributions contain a beam traveling toward the shock as a remnant of the accelerated electrons. Similar distribution functions prevail throughout the shock transition layer, suggesting that the observed acceleration and thermalization is essential to the cross-shock electron heating.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Electron Bulk Acceleration and Thermalization at Earth's Quasiperpendicular Bow Shock

Electron heating at Earth's quasiperpendicular bow shock has been surmised to be due to the combined effects of a quasistatic electric potential and scattering through wave-particle interaction. Here we report the observation of electron distribution functions indicating a new electron heating process occurring at the leading edge of the shock front. Incident solar wind electrons are accelerated parallel to the magnetic field toward downstream, reaching an electron-ion relative drift speed exceeding the electron thermal speed. The bulk acceleration is associated with an electric field pulse embedded in a whistler-mode wave. The high electron-ion relative drift is relaxed primarily through a nonlinear current-driven instability. The relaxed distributions contain a beam traveling toward the shock as a remnant of the accelerated electrons. Similar distribution functions prevail throughout the shock transition layer, suggesting that the observedacceleration and thermalization is essential to the cross-shock electron heating.

Chen, L.-J.↗

Drift turbulence, particle transport, and anomalous dissipation at the reconnecting magnetopause

Here, using fully kinetic 3D simulations, the reconnection dynamics of asymmetric current sheets are examined at the Earth's magnetopause. The plasma parameters are selected to model MMS magnetopause diffusion region crossings with guide fields of 0.1, 0.4, and 1 of the reconnecting magnetosheath field. In each case, strong drift-wave fluctuations are observed in the lower-hybrid frequency range at the steep density gradient across the magnetospheric separatrix. These fluctuations give rise to cross-field electron particle transport. In addition, this turbulent mixing leads to significantly enhanced electron parallel heating in comparison to 2D simulations. We study three different methods of quantifying the anomalous dissipation produced by the drift fluctuations, based on spatial averaging, temporal averaging, and temporal averaging followed by integrating along magnetic field lines. A comparison of different methods reveals complications in identifying and measuring the anomalous dissipation. Nevertheless, the anomalous dissipation from short wavelength drift fluctuations appears weak for each case, and the reconnection rates observed in 3D are nearly the same as in 2D models. Finally, the 3D simulations feature a number of interesting new features that are consistent with recent MMS observations, including cold beams of magnetosheath electrons that penetrate into the hotter magnetospheric inflow, the related observation of decreasing temperature in regions of increasing total density, and an effective turbulent diffusion coefficient that agrees with predictions from quasi-linear theory.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗