Engineering Papers⌕ Search

Engineering topics

Wang, Ross

Publications and source records attributed to Wang, Ross.

26 records · Page 2

Assessing the Implications of Automated Merging Control in a Mixed and Heterogeneous Traffic Environment

Previous efforts to explore the implications of partial market penetration of connected and automated vehicles (CAVs) show a consensus on the benefits of higher market penetration rates (MPR) of vehicles enabled with connectivity and/or automation. There is, however, a level of uncertainty regarding the effects of lower market penetration rates and the consideration of heterogeneous vehicle fleets. Using VISSIM to perform microscopic traffic simulation and, vehicle simulation models, we assess the impacts of different CAVs market penetration rates on fuel consumption considering a heterogeneous traffic environment. The results show that the fuel efficiency benefits of optimal coordination control are maximized in moderate congested scenarios when the CAVs MPR exceeds 40%.

Rios Torres, Jackeline↗

Visualizing Vehicle Acceleration and Braking Energy at Intersections along a Major Traffic Corridor

Automobiles approaching a controlled intersection need to brake and come to a full stop when the signal transitions from green to red, and the vehicle must later accelerate to normal speeds after the signal changes back to green. These stops and starts associated with normal signal changes lead to unnecessary energy consumption and vehicle emissions. Previous studies have revealed that the optimization of traffic intersections' signal controls and coordination facilitates smoother traffic flows with reduced stop-and-go driving, which can significantly reduce traffic congestion and unnecessary fuel waste. This paper presents an interactive visual analytics dashboard that allows transportation planners to explore and analyze energy consumption patterns resulting from temporally varying traffic signal phases at multiple intersections along a major transportation corridor using traffic simulation outputs. The visual dashboard is implemented as an accessible and responsive web application and employs a combination of visualization techniques to cover multiple aspects of vehicle acceleration and braking at multiple adjacent intersections along a corridor. The paper presents a case study of a simulated traffic scenario on the Shallowford Road traffic corridor located in Chattanooga, Tennessee to demonstrate the capability of the visual dashboard.

Xu, Haowen↗

Multiscale and Multivariate Transportation System Visualization for Shopping District Traffic and Regional Traffic

In this paper, we present a suite of visualization techniques for sensor-based transportation system data at different scales to facilitate the exploration of interconnected traffic dynamics at intersections and highways. Additionally, these techniques are designed for analyzing multivariate traffic data from radar-based highway sensors and camera-based intersection sensors recording turn movements and vehicle speed, in the Chattanooga Metropolitan Area, with the capability of (a) revealing multiscale mobility patterns using different levels of data aggregation (e.g., individual sensor for microscale, multiple sensors along a corridor for mesoscale, and a larger number of sensors across the region for macroscale visualization) at different intervals (e.g., 5-min intervals, time of day, full day, and day-of-the-week), and (b) exploring the spatial variation of multiple traffic-related variables (e.g., volumes, speeds, turn movements, and traffic light colors) provided by the sensors. We close with a case study to demonstrate the effectiveness of our multiscale and multivariate visualization techniques. At microscale, we focused on intersection data from a shopping district around Shallowford Road in East Chattanooga. For mesoscale visualization, we studied the Shallowford Road corridor and an adjacent stretch of I-75. At macroscale, we included highway data from the Chattanooga Metropolitan Area. All visualizations were integrated into a web-based situational awareness tool to promote user access and interaction. At a minimum, each visualization provides the option for selecting dates for real-time (depending on sensor availability) and historical data, and additional information on hovering, though most provide more detailed information, including different views of the selected data, or interactive highlights.

33 ADVANCED PROPULSION SYSTEMS↗

Optimizing Signal Timing Control for Large Urban Traffic Networks Using an Adaptive Linear Quadratic Regulator Control Strategy

We discuss how traffic signal control is important for intersection safety and efficiency. However, most traffic signal control methods are designed for individual intersections or corridors. Although some adaptive control systems have been developed, the methods used are often proprietary and not published, making it difficult to evaluate their effectiveness. This study proposes an adaptive multi-input and multi-output traffic signal control method that not only can improve network-wide traffic operations in terms of reduced traffic delay and energy consumption, but also is more computationally feasible than existing centralized signal control methods. Considering intersection interactions, a linear dynamic traffic system model was built and adaptively updated to reflect how the signal control input of each intersection affects network-wide vehicle travel delay. Based on the system model, an adaptive linear-quadratic regulator (LQR) was designed to minimize both traffic delay and incremental changes in the control input. The proposed control method was evaluated in a microscopic traffic simulation environment with a 35-intersection network of Bellevue City, Washington. Simulation results show that the proposed method had shorter average traffic delays in the network when compared with the traffic delays controlled by the state-of-the-art max-pressure, self-organizing traffic lights, and independent deep Q network methods.

42 ENGINEERING↗

VRP-based Model for Lane Marking Assessment with MRU Vehicle

Evaluation of lane marking conditions has advanced from visual and/or manual inspections, which can be unsafe and time-consuming, to mobile assessments using vehicle-mounted devices that allow transportation agencies to collect retroreflectivity data at a large scale in a safer and efficient manner. However, cost-effectively routing and operating these mobile retroreflectivity units (MRUs) at a large scale can be a unique challenge. This study proposes a vehicle routing problem (VRP) based model to optimize the routing of MRUs. The model takes into account the additional costs of daily and weekly operations of MRUs, such as remounting the device and traveling between tasks.

Lin, Yu-Chun↗

Globalized Modeling and Signal Timing Control for Large-scale Networked Intersections

Traffic intersections are often the bottlenecks of traffic systems. Given a traffic network, an optimal traffic signal control strategy can result in smooth traffic flow and thus reduce energy consumption and environmental impact at intersections. This study aims to develop a new multi input and multi output (MIMO) traffic signal control method that can improve network wide traffic operations in terms of delay and energy consumption. In this context, a 35 intersection network of Bellevue, WA is used as the basis for the development of the algorithm, where modeling and intersection controls in a globalized setting are established using MIMO linear control theory and high matrix formulation. The proposed control method is evaluated in a microscopic traffic simulation environment, VISSIM. Simulation results show that the proposed method has much shorter average travel delays in the network when compared with the delays of conventional pretimed and actuated controls.

Wang, Hong↗

Development of a Real-Time Mobility Control and Visualization System with Predictive Vehicle Speed Control for Connected and Automated Vehicles (CAVs)

The Oak Ridge National Laboratory is developing a cloud-based platform for the deployment and evaluation of mobility- and efficiency-oriented connected and automated vehicles (CAVs) applications that will include fundamental data management, communications and visualization elements. This system will serve as a data portal, providing indirect communications that are relevant to efficiency applications, and can be used for both real world CAVs deployments and virtual systems that allow evaluation of new CAVs applications and algorithms. Predictive vehicle speed control algorithms have been developed and will be integrated with the real-time queryable transportation database and geospatial platform to achieve optimized energy efficiency and improved traffic flow in off-freeway driving. This paper describes the technology and summarizes evaluations being conducted for a corridor in Chattanooga, Tennessee, where the technology is expected to be initially deployed. To evaluate the fuel savings resulting from the vehicle speed control and the RTMCS data framework, vehicle powertrain simulations will be completed using results from a calibrated microscopic traffic model.

Laclair, Tim↗