Engineering Papers⌕ Search

Engineering topics

Wang, Peng

Publications and source records attributed to Wang, Peng.

At least 127 records · Page 7

In-Situ Proton Irradiation-Corrosion Study of ATF Candidate Alloys in Simulated PWR Primary Water

Irradiation enhanced corrosion behavior of Accident Tolerant Fuel candidate alloys T91 and Fe15Cr4Al were evaluated using in-situ proton irradiation-corrosion experiments in hydrogenated pure water (at 320 °C, 3 wppm H2) with a 5.4 MeV proton beam. The thin sample acted as a “window” to allow protons to fully penetrate the sample while maintaining system pressure. The area of the samples exposed to the proton beam experienced effects from displacement damage and radiolysis products. The aim of the study was to characterize the effect of radiation on the kinetics and character of oxidation caused by accelerated waterside corrosion under irradiation. Samples irradiated with protons for total displacement damage of *0.1 dpa (dose rate in water, 400 kGy/s) at an exposure time of 24 h were compared. Oxide morphology, phase structure, and composition of the oxide, metal and the metal/oxide interface were investigated using TEM and EDS and are related to the test conditions. The oxidation rate or resulting oxide thickness is dependent on the alloy Cr content; the oxidation rate increased as the Cr content decreased. The resulting oxide consists of an inner layer of Cr-rich spinel oxide and outer magnetite crystals in the unirradiated region; while the irradiated region consists of Cr-rich inner oxide spinel that was partially dissolved and coverage of outer non-faceted hematite precipitates.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Assessment of Corrosion Resistance of Candidate Alloys for Accident Tolerant Fuel Cladding under Reactor Conditions

The environment of a light water reactor (LWR) core is a combination of high temperatures, high pressures, high neutron and gamma fluxes, mechanical stresses and chemical aggressive coolants. All of these factors combined can induce changes in the microstructure of the fuel and cladding that are very difficult to predict in a systematic fashion [1] and are major challenge for the safety and life extension of current reactors. Throughout reactor transients and accidents, the cladding may experience deterioration caused by a temperature increase, oxidation embrittlement [1], [2], or mechanical interaction with the fuel caused by stress [3]. These events may lead to cracking or rupture of the cladding, causing the release of fission products into the coolant. Such events have been observed at the Three Mile Island and Fukushima accidents. To avoid such occurrences in LWRs, the accident tolerant fuels (ATF) program was initiated to focus on the replacement of zirconium-based alloys with materials that exhibit slower steam oxidation kinetics. This project focuses on several iron-based alloys such as T91, APMT, MA956, experimental Fe-Cr alloys and one experimental nanofeatured alloy (NFA). Experiments have been conducted in both PWR primary water at 320°C and BWR normal water chemistry at 288°C, spanning a large range in electrochemical corrosion potential (ECP). Samples were exposed to either proton irradiation (University of Michigan) or electron irradiation (Notre Dame Radiation Laboratory) to independently assess the roles of displacement damage or radiolysis on the corrosion rate, oxide thickness, morphology, structure and resistivity. Post-irradiation characterization of various regions of the electronirradiated samples was completed by means of microscopy (Notre Dame Integrated Imaging Facility) and spectroscopy (Notre Dame Materials Characterization Facility) techniques to provide high resolution information regarding the oxide layer present on the surface of the material.

Grdanovska, Slavica↗

Cell-Free Synthetic Biology Chassis for Nanocatalytic Photon-to-Hydrogen Conversion

We report on entirely man-made nanobio hybrid fabricated through assembly of cell-free expressed transmembrane proton pump and semiconductor nanoparticles as an efficient nanocatalysis for photocatalytic H 2 evolution. The system produces H 2 at a turnover rate of 239 (μmole protein) -1 h -1 under green and 17742 (μmole protein) -1 h -1 under white light at ambient conditions, in water at neutral pH with methanol as a sacrificial electron donor. Robustness and flexibility of this approach allows for systemic manipulation at nanoparticle-bio interface toward directed evolution of energy transformation materials and artificial systems.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Giant Ferroelectric Polarization in Ultrathin Ferroelectrics via Boundary-Condition Engineering

Tailoring and enhancing the functional properties of materials at reduced dimension is critical for continuous advancement of modern electronic devices. Here, the discovery of local surface induced giant spontaneous polarization in ultrathin BiFeO 3 ferroelectric films is reported. Using aberration-corrected scanning transmission electron microscopy, it is found that the spontaneous polarization in a 2 nm-thick ultrathin BiFeO 3 film is abnormally increased up to ≈90–100 µC cm -2 in the out-of-plane direction and a peculiar rumpled nanodomain structure with very large variation in c/a ratios, which is analogous to morphotropic phase boundaries (MPBs), is formed. By a combination of density functional theory and phase-field calculations, it is shown that it is the unique single atomic Bi 2 O 3-x layer at the surface that leads to the enhanced polarization and appearance of the MPB-like nanodomain structure. This finding clearly demonstrates a novel route to the enhanced functional properties in the material system with reduced dimension via engineering the surface boundary conditions.

36 MATERIALS SCIENCE↗

Electroplating lithium transition metal oxides

Materials synthesis often provides opportunities for innovation. We demonstrate a general low-temperature (260°C) molten salt electrodeposition approach to directly electroplate the important lithium-ion (Li-ion) battery cathode materials LiCoO 2 , LiMn 2 O 4 , and Al-doped LiCoO 2 . The crystallinities and electrochemical capacities of the electroplated oxides are comparable to those of the powders synthesized at much higher temperatures (700° to 1000°C). In conclusion, this new growth method significantly broadens the scope of battery form factors and functionalities, enabling a variety of highly desirable battery properties, including high energy, high power, and unprecedented electrode flexibility.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Novel high-efficiency visible-light responsive Ag 4 (GeO 4 ) photocatalyst

A novel high-efficiency visible-light responsive Ag 4 (GeO 4 ) photocatalyst was prepared by a facile hydrothermal method. The photocatalytic activity of as-prepared Ag 4 (GeO 4 ) was evaluated by photodegradation of methylene blue (MB) dye and water splitting experiments. The photodegradation efficiency and oxygen production efficiency of Ag 4 (GeO 4 ) were detected to be 2.9 and 1.9 times higher than those of Ag 2 O. UVvis diffuse reflectance spectroscopy (DRS), photoluminescence experiment and photoelectric effect experiments prove that the good light response and high carrier separation efficiency facilitated by the internal electric field are the main reasons for Ag 4 (GeO 4 )'s excellent catalytic activity. Radical-trapping experiments reveal that the photogenerated holes are the main active species. Lastly, first-principles theoretical calculations provide more insight into understanding the photocatalytic mechanism of the Ag 4 (GeO 4 ) catalyst.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Revealing mechanism responsible for structural reversibility of single-crystal VO 2 nanorods upon lithiation/delithiation

A pure phase of VO 2 (B) nanorods have been synthesized through an energy-efficient microwave hydrothermal reaction and used as cathode materials of lithium ion batteries, which exhibit promising specific capacity (e.g., 130 mA h g -1 even after 100 charge/discharge cycles) and rate capacity (e.g., ~130 mA h g -1 at a high current of 400 mA g -1 ). The excellent cyclability originates from the structural reversibility of VO 2 (B) upon lithiation/delithiation that is confirmed by the in situ high-energy synchrotron X-ray diffraction (HEXRD) and in situ x-ray adsorption near-edge spectroscopy (XANES) of the VO 2 nanorods in operating battery cells. As a result, the real-time results reveal that discharge forces lithium ions to insert firstly into the tunnels with the largest size along b direction followed by the second largest tunnels along c direction, which is completely reversible in the charge process.

36 MATERIALS SCIENCE↗

Crystal structures of Hsp104 N-terminal domains from Saccharomyces cerevisiae and Candida albicans suggest the mechanism for the function of Hsp104 in dissolving prions

Hsp104 is a yeast member of the Hsp100 family which functions as a molecular chaperone to disaggregate misfolded polypeptides. To understand the mechanism by which the Hsp104 N-terminal domain (NTD) interacts with its peptide substrates, crystal structures of the Hsp104 NTDs from Saccharomyces cerevisiae (ScHsp104NTD) and Candida albicans (CaHsp104NTD) have been determined at high resolution. The structures of ScHsp104NTD and CaHsp104NTD reveal that the yeast Hsp104 NTD may utilize a conserved putative peptide-binding groove to interact with misfolded polypeptides. In the crystal structures ScHsp104NTD forms a homodimer, while CaHsp104NTD exists as a monomer. The consecutive residues Gln105, Gln106 and Lys107, and Lys141 around the putative peptide-binding groove mediate the monomer–monomer interactions within the ScHsp104NTD homodimer. Dimer formation by ScHsp104NTD suggests that the Hsp104 NTD may specifically interact with polyQ regions of prion-prone proteins. The data may reveal the mechanism by which Hsp104 NTD functions to suppress and/or dissolve prions.

59 BASIC BIOLOGICAL SCIENCES↗

Field Test of Wake Steering at an Offshore Wind Farm

In this paper, a field test of wake steering control is presented. The field test is the result of a collaboration between the National Renewable Energy Laboratory (NREL) and Envision Energy, a smart energy management company and turbine manufacturer. In the campaign, an array of turbines within an operating commercial offshore wind farm in China have the normal yaw controller modified to implement wake steering according to a yaw control strategy. The strategy was designed using NREL wind farm models, including a computational fluid dynamics model, SOWFA, for understanding wake dynamics and an engineering model, FLORIS, for yaw control optimization. Results indicate that, within the certainty afforded by the data, the wake-steering controller was successful in increasing power capture, by amounts similar to those predicted from the models.

17 WIND ENERGY↗

Formation of solid thorium monoxide at near-ambient conditions as observed by neutron reflectometry and interpreted by screened hybrid functional calculations

Oxidation of a ~1000 Å sputter-deposited thorium thin film at 150 °C in 100 ppm of flowing oxygen in argon produces the long-sought solid form of thorium monoxide. Changes in the scattering length density (SLD) distribution in the film over the 700-min experiment measured by in-situ, dynamic neutron reflectometry (NR) shows the densities, compositions and thickness of the various thorium oxides layers formed. Screened, hybrid density-functional theory calculations of potential thorium oxides aid interpretation, providing atomic-level picture and energetics for understanding oxygen migration. NR provided evidence of the formation of substoichiometric thorium oxide, ThO y (y < 1) at the interface between the unreacted thorium metal and its dioxide overcoat which grows inward, consuming the thorium at a rate of 2.1 Å/min while y increases until reaching 1:1 oxygen-to-thorium. Its presence indicates that kinetically-favored solid-phase ThO can be preferentially generated as a majority phase under the thermodynamically-favored ThO 2 top layer at conditions close to ambient.

36 MATERIALS SCIENCE↗

Targeted Metabolomics of the Phenylpropanoid Pathway in Arabidopsis thaliana using Reversed Phase Liquid Chromatography Coupled with Tandem Mass Spectrometry: Measuring Lignin Precursors by LC-MS

The phenylpropanoid pathway is a source of a diverse group of compounds derived from phenylalanine, many of which are involved in lignin biosynthesis and serve as precursors for the production of valuable compounds, such as coumarins, flavonoids, and lignans. Consequently, recent efforts have been invested in mechanistically understanding monolignol biosynthesis, making the quantification of these metabolites vital. To develop an improved and comprehensive analytical method for (i) extensively profiling, and (ii) accurately quantifiying intermediates of the monolignol biosynthetic network, using Arabidopsis thaliana as a model system. A liquid chromatography-tandem mass spectrometry with electrospray ionization was developed to quantify phenylpropanoid metabolites in Arabidopsis wildtype and cinnamoyl CoA reductase1 (CCR1) deficient lines (ccr1). Vortexing at high temperatures (65°C) enhanced release of phenylpropanoids, specifically the more hydrophobic compounds. A pH of 5.3 and ammonium acetate buffer concentration of 2.5 mM resulted in an optimal analyte response across standards. Ion suppression was estimated using standard spike recovery studies for accurate quantitation. The optimized method was used to profile Arabidopsis wildtype and ccr1 stems. An increase in hydroxycinnamic acid derivatives and a decrease in the hydroxycinnamyl aldehydes and alcohols in ccr1 lines, supports a shift of flux from lignin synthesis to other secondary metabolites and phenylpropanoid derivatives. Compared to existing targeted profiling techniques, our method is capable of quantifying a wider range of intermediates (15 out of 22 in WT Arabidopsis stems) at low in vivo concentrations (~50 pmol/g-FW for certain compounds), while requiring minimal sample preparation.

09 BIOMASS FUELS↗

Irradiation Accelerated Corrosion of Stainless Steel and Ferritic-Martensitic Steel in Simulated Primary Water

Austenitic stainless steel, and ferritic-martensitic steel were irradiated with a proton beam while simultaneously exposed to simulated PWR primary water. Samples were exposed for 4-72 hr in 320°C water with 3 wppm hydrogen while simultaneously irradiated at surface dose rates from 400-4000 kGy/s (4x10-7 to 7x10-6 dpa/s). After exposure, samples were characterized with TEM, EDS, and Raman spectroscopy to determine the effects of radiation on the growth and stability of the oxide films. Samples which were irradiated during exposure had thinner inner oxides compared to unirradiated samples. Irradiated samples also had hematite on their surfaces, while unirradiated samples did not, indicating an increase in corrosion potential due to irradiation. Sample regions which were not irradiated but were exposed to the flow of irradiated water were similar to directly irradiated regions, suggesting that water radiolysis is the mechanism primarily responsible for the observed effects.

Stainless Steel, ferritic-martensitic steel, radia↗

MiR-509-5p suppresses the proliferation, migration, and invasion of non-small cell lung cancer by targeting YWHAG

Dysregulation of microRNAs (miRNAs) expression is prevalent in human malignancy development and progression. As previously reported, miR-509-5p has been identified as a tumor suppressor in various cancers, but its role and functional mechanism in non-small lung cancer (NSCLC) remains unknown. In the present study, we found that miR-509-5p was significantly downregulated in NSCLC tissues and cell lines using Quantitative real-time PCR (qRT-PCR). In addition, overexpression of miR-509-5p markedly inhibited the proliferation, migration, invasion and phosphorylation of Akt of NSCLC cells. Moreover, we identified tyrosine 3-monooxygenase/tryptophan 5-monooxygenase activation protein gamma (YWHAG) as a direct target of miR-509-5p. Knockdown of YWHAG mimicked the inhibitory effects of miR-509-5p on NSCLC cells for proliferation and motility. Finally, the negative correlation between miR-509-5p and YWHAG expression in NSCLC specimens was demonstrated. Taken together, our present study revealed the tumor suppressive role of miR-509-5p in NSCLC by targeting YWHAG, suggesting that miR-509-5p/YWHAG axis might be considered as a novel and potential target for clinical diagnosis and therapeutics of NSCLC. - Highlights: • The tumor suppressive role of miRNA-509-5p in non-small cell lung cancer is revealed. • MiR-509-5p exerts its influence on NSCLC cells by targeting YWHAG. • MiR-509-5p inhibits the phosphorylation of Akt in NSCLC cells. • MiR-509-5p can be deemed as a potential diagnostic and therapeutic target for NSCLC.

60 APPLIED LIFE SCIENCES↗

Chemical strain-dependent two-dimensional transport at R AlO 3 / SrTiO 3 interfaces ( R = La , Nd , Sm , and Gd )

Perovskite RAlO 3 (R = La, Nd, Sm, and Gd) films have been deposited epitaxially on (001) TiO 2 -terminated SrTiO 3 substrates. In this paper, it is observed that the two-dimensional transport characteristics at the RAlO 3 /SrTiO 3 interfaces are very sensitive to the species of rare-earth element, that is to chemical strain. Although electron energy loss spectroscopy measurements show that electron transfer occurs in all the four polar/nonpolar heterostructures, the amount of electrons transferred across SmAlO 3 /SrTiO 3 and GdAlO 3 /SrTiO 3 interfaces are much less than those across LaAlO 3 /SrTiO 3 and NdAlO 3 /SrTiO 3 interfaces. First-principles calculations reveal the competition between ionic polarization and electronic polarization in the polar layers in compensating the build-in polarization due to the polar discontinuity at the interface. Finally, in particular, a large ionic polarization is found in SmAlO 3 /SrTiO 3 and GdAlO 3 /SrTiO 3 systems (which experience the largest tensile epitaxial strain), hence reducing the amount of electrons transferred.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The ER stress sensor PERK luminal domain functions as a molecular chaperone to interact with misfolded proteins

PERK is one of the major sensor proteins which can detect the protein-folding imbalance generated by endoplasmic reticulum (ER) stress. It remains unclear how the sensor protein PERK is activated by ER stress. It has been demonstrated that the PERK luminal domain can recognize and selectively interact with misfolded proteins but not native proteins. Moreover, the PERK luminal domain may function as a molecular chaperone to directly bind to and suppress the aggregation of a number of misfolded model proteins. The data strongly support the hypothesis that the PERK luminal domain can interact directly with misfolded proteins to induce ER stress signaling. To illustrate the mechanism by which the PERK luminal domain interacts with misfolded proteins, the crystal structure of the human PERK luminal domain was determined to 3.2 Å resolution. Two dimers of the PERK luminal domain constitute a tetramer in the asymmetric unit. Superimposition of the PERK luminal domain molecules indicated that the β-sandwich domain could adopt multiple conformations. It is hypothesized that the PERK luminal domain may utilize its flexible β-sandwich domain to recognize and interact with a broad range of misfolded proteins.

59 BASIC BIOLOGICAL SCIENCES↗

Li 3 PO 4 Matrix Enables a Long Cycle Life and High Energy Efficiency Bismuth-Based Battery

Bismuth is a lithium-ion battery anode material that can operate at an equilibrium potential higher than graphite and provide a capacity twice as high as that of Li 4 Ti 5 O 12 , making it intrinsically free from lithium plating that may cause catastrophic battery failure. However, the potential of bismuth is hampered by its inferior cyclability (limited to tens of cycles). Here, we propose an “ion conductive solid-state matrix” approach to address this issue. By homogeneously confining bismuth nanoparticles in a solid-state γ-Li 3 PO 4 matrix that is electrochemically formed in situ, the resulting composite anode exhibits a reversible capacity of 280 mA hours per gram (mA h/g) at a rate of 100 mA/g and a record cyclability among bismuth-based anodes up to 500 cycles with a capacity decay rate of merely 0.071% per cycle. We further show that full-cell batteries fabricated from this composite anode and commercial LiFePO 4 cathode deliver a stable cell voltage of ~2.5 V and remarkable energy efficiency up to 86.3%, on par with practical batteries (80–90%). This work paves a way for harnessing bismuth-based battery chemistry for the design of high capacity, safer lithium-ion batteries to meet demanding applications such as electric vehicles.

25 ENERGY STORAGE↗

Multicolor fluorescent light-emitting diodes based on cesium lead halide perovskite quantum dots

High quantum yield, narrow full width at half-maximum and tunable emission color of perovskite quantum dots (QDs) make this kind of material good prospects for light-emitting diodes (LEDs). However, the relatively poor stability under high temperature and air condition limits the device performance. To overcome this issue, the liquid-type packaging structure in combination with blue LED chip was employed to fabricate the fluorescent perovskite quantum dot-based LEDs. A variety of monochromatic LEDs with green, yellow, reddish-orange, and red emission were fabricated by utilizing the inorganic cesium lead halide perovskite quantum dots as the color-conversion layer, which exhibited the narrow full width at half-maximum (<35 nm), the relatively high luminous efficiency (reaching 75.5 lm/W), and the relatively high external quantum efficiency (14.6%), making it the best-performing perovskite LEDs so far. Compared to the solid state LED device, the liquid-type LED devices exhibited excellent color stability against the various working currents. Furthermore, we demonstrated the potential prospects of all-inorganic perovskite QDs for the liquid-type warm white LEDs.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗