Multi-vinyl linked benzothiadiazole conjugated polymers: high performance, low crystalline material for transistors
A multi-vinyl linked conjugated polymer PTBTV exhibits a hole mobility of up to 3.2 cm 2 V -1 s -1 with relatively low crystallinity.
Engineering topics
Publications and source records attributed to Wang, Lin.
A multi-vinyl linked conjugated polymer PTBTV exhibits a hole mobility of up to 3.2 cm 2 V -1 s -1 with relatively low crystallinity.
Rational control of the interlayer space of multilayered Ti 3 C 2 T x enables the MXene to exhibit an excellent U( vi ) sorption capacity and an exceptional radionuclide encapsulation performance.
Organic matter affects the degradation of triclosan as both a sequester and an electron shuttle.
A series of new imidazoline-based iridium complexes has been developed for hydrogenation of CO 2 and dehydrogenation of formic acid. One of the proton-responsive complexes bearing two –OH groups at ortho and para positions on a coordinating pyridine ring (3 b) can catalyze efficiently the chemical fixation of CO 2 and release H 2 under mild conditions in aqueous media without using organic additives/solvents. Notably, hydrogenation of CO 2 can be efficiently carried out under CO 2 and H 2 at atmospheric pressure in basic water by 3 b, achieving a turnover frequency of 106 h –1 and a turnover number of 7280 at 25 °C, which are higher than ever reported. Furthermore, highly efficient CO-free hydrogen production from formic acid in aqueous solution employing the same catalyst under mild conditions has been achieved, thus providing a promising potential H 2 -storage system in water.
ZnO/ZnO:Sb core-shell structured nanowires (NWs) were grown by the metal organic chemical vapor deposition method where the shell was doped with antimony (Sb) in an attempt to achieve ZnO p-type conduction. To directly investigate the Sb doping effect in ZnO, scanning capacitance microscopy (SCM) and scanning spreading resistance microscopy (SSRM) were performed on the NWs' cross-sections mapping their two dimensional (2D) local electrical properties. Although no direct p-type inversion in ZnO was revealed, a lower net electron concentration was pointed out for the Sb-doped ZnO shell layer with respect to the non-intentionally doped ZnO core, indicating an evident compensating effect as a result of the Sb incorporation, which can be ascribed to the formation of Sb-related acceptors. The results demonstrate SCM/SSRM investigation being a direct and effective approach for characterizing radial semiconductor one-dimensional (1D) structures and, particularly, for the doping study on the ZnO nanomaterial towards its p-type realization.
Increasing the electron emission site density of nanostructured emitters with limited field screening effects is one of the key issues for improving the field emission (FE) properties. In this work, we reported the Au-nanoparticles-density-dependent field emission behaviors of surface-decorated SiC nanowires. The Au nanoparticles (AuNPs) decorated around the surface of the SiC nanowires were achieved via an ion sputtering technique, by which the densities of the isolated AuNPs could be adjusted by controlling the fixed sputtering times. The measured FE characteristics demonstrated that the turn-on fields of the SiC nanowires were tuned to be of 2.06, 1.14, and 3.35 V/μm with the increase of the decorated AuNPs densities, suggesting that a suitable decorated AuNPs density could render the SiC nanowires with totally excellent FE performances by increasing the emission sites and limiting the field screening effects.
A simple hydrothermal system was developed for controllable morphologies of the Prussian yellow Fe[Fe(CN){sub 6}] nanostructures in the presence of organic additives. Hollow and solid nanospheres of the Prussian yellow materials were successfully synthesized with suitable experimental conditions. It is found that the amounts of organic additives CTAB could result in the formation of the spherical nanocrystals and the hydrolysis of phosphate in the solution could play a role in the final morphology of the products. A possible formation mechanism of the Prussian yellow nanostructures is proposed. - Graphical abstract: A hydrothermal process was developed for controllable fabrication of the Prussian yellow hollow and solid nanospheres with the employment of different phosphate. The hydrolysis of phosphate in the solution could play a role in the morphology of the Prussian yellow nanomaterials. The acid phosphate (NaH{sub 2}PO{sub 4}) could result in the formation of the solid nanoparticles. The alkalescent phosphate (Na{sub 2}HPO{sub 4}) could result in the formation of the hollow nanoparticles. Display Omitted.
A numerical method for the solution of one-dimension drift-flux model has been developed. Correlations for heat and mass transfer and kinematic constitutive equation were used to close the set of the partial differential equations. The finite volume method based on the staggered grid and fully implicit backward Euler method were applied to discretize the spatial and time differential items, respectively. The discretization equations were solved iteratively in a same manner as in SIMPLE method for a single-phase flow. The verification and validation of the numerical method and closure model for one-dimension drift-flux model have been performed by comparing the code solution with the experimental data. Furthermore, the axial distribution of void fraction and pressure also have been investigated under different heated case. (authors)
We report a unique phase transition in compressed exposed curved surface nano-TiO{sub 2} with high photocatalytic activity using in situ synchrotron X-ray diffraction and Raman Spectroscopy. High-pressure studies indicate that the anatase phase starts to transform into baddeleyite phase upon compression at 19.4 GPa, and completely transforms into the baddeleyite phase above 24.6 GPa. Upon decompression, the baddeleyite phase was maintained until the pressure was released to 6.4 GPa and then transformed into the α-PbO{sub 2} phase at 2.7 GPa. Together with the results of high-resolution transmission electron microscopy and the pressure-volume relationship, this phase transition's characteristics during the compression-decompression cycle demonstrate that the truncated biconic morphology possessed excellent stability. This study may provide an insight to the mechanisms of stability for high photocatalytic activity of nano-TiO{sub 2}.
In this study, pressure-induced phase transformation and fluorescent properties of ErF 3 were investigated here using in-situ synchrotron X-ray diffraction and photoluminescence up to 32.1 GPa at room temperature. Results showed that ErF 3 underwent a reversible pressure-induced phase transition from the β-YF 3 –type to the fluocerite LaF 3 -type at 9.8 GPa. The bulk moduli B 0 for low- and high-pressure phases were determined to be 130 and 208 GPa, respectively. Also, photoluminescencent studies showed that new emission lines belonging to the transition of 2 H 11/2 → 4 I 15/2 , 4 S 3/2 → 4 I 15/2 , and 4 F 9/2 → 4 I 15/2 appeared during phase transition, suggesting pressure-induced electronic band splitting. Remarkably, significant pressure-induced enhancement of photoluminescence was observed, which was attributed to lattice distortion of the material under high pressure.
We proposed and investigated a terahertz Orotron, which is based on the recently revealed special Smith–Purcell radiation. It overcomes the main obstacles of the traditional Orotron in the terahertz region—unreachable high starting-current-density and low radiation power. With the experimentally available electron beam and facilities, its average output power can reach hundreds of milliwatts and even several watts in terahertz region, which is many orders of magnitude higher than that of the traditional Orotron. Additionally, it can be controlled to operate in ether the first or the second order mode, and the radiation frequency can extend from 0.1 THz to 1 THz. These remarkable advantages make it a promising terahertz source for practical applications.
Morphological, structural, and optical characterization of microwave synthesized ZnO single crystal microtubes were investigated in this work. The structure and morphology of the ZnO microtubes are characterized using X-ray diffraction (XRD), single crystal diffraction (SCD), field emission scanning electron microscopy (FESEM), energy dispersive X-ray spectroscopy (EDX), and transmission electron microscopy (TEM). The results reveal that the as-synthesized ZnO microtube has a highly regular hexagonal cross section and smooth surfaces with an average length of 650–700 μm, an average outer diameter of 50 μm and wall thickness of 1–3 μm, possessing a single crystal wurtzite hexagonal structure. Optical properties of ZnO single crystal microtubes were investigated by photoluminescence (PL) and ultraviolet-visible (UV-vis) absorption techniques. Room-temperature PL spectrum of the microtube reveal a strong UV emission peak at around 375.89 nm and broad and a weak visible emission with a main peak identified at 577 nm, which was assigned to the nearest band-edge emission and the deep-level emission, respectively. The band gap energy of ZnO microtube was found to be 3.27 eV. - Highlights: • ZnO microtube length of 650–700 μm, diameter of 50 μm, wall thickness of 1–3 μm • ZnO microtube possesses a single crystal wurtzite hexagonal structure. • The crystal system is hexahedral oriented along a-axis with indices of (100). • A strong and sharp UV emission at 375.89 nm (3.29 eV) • One prominent absorption band around 378.88 nm (3.27 eV)
Hydrogen sulfides have recently received a great deal of interest due to the record high superconducting temperatures of up to 203 K observed on strong compression of dihydrogen sulfide ( H 2 S ). A joint theoretical and experimental study is presented in this paper in which decomposition products and structures of compressed H 2 S are characterized, and their superconducting properties are calculated. In addition to the experimentally known H 2 S and H 3 S phases, our first-principles structure searches have identified several energetically competitive stoichiometries that have not been reported previously: H 2 S 3 , H 3 S 2 , HS 2 , and H 4 S 3 . In particular, H 4 S 3 is predicted to be thermodynamically stable within a large pressure range of 25–113 GPa. High-pressure x-ray diffraction measurements confirm the presence of H 3 S and H 4 S 3 through decomposition of H 2 S that emerges at 27 GPa and coexists with residual H 2 S , at least up to the highest pressure of 140 GPa studied in our experiments. Electron-phonon coupling calculations show that H 4 S 3 has a small T c of below 2 K, and that H 2 S is mainly responsible for the observed superconductivity of samples prepared at low temperature ( < 100 K).
CrAs was observed to possess the bulk superconductivity under high-pressure conditions. To understand the superconducting mechanism and explore the correlation between the structure and superconductivity, the high-pressure structural evolution of CrAs was investigated using the angle-dispersive X-ray diffraction (XRD) method. The structure of CrAs remains stable up to 1.8 GPa, whereas the lattice parameters exhibit anomalous compression behaviors. With increasing pressure, the lattice parameters a and c both demonstrate a nonmonotonic change, and the lattice parameter b undergoes a rapid contraction at ~0.18–0.35 GPa, which suggests that a pressure-induced isostructural phase transition occurs in CrAs. Above the phase transition pressure, the axial compressibilities of CrAs present remarkable anisotropy. A schematic band model was used to address the anomalous compression behavior of CrAs. Lastly, the present results shed light on the structural and related electronic responses to high pressure, which play a key role toward understanding the superconductivity of CrAs.
The density of the nanowires is one of the key issues for their field emission (FE) properties of the nanoarrays, since it plays an important role on the electron emission sites and field screening effect. Here, we reported the nanowire-density-dependent FE properties of the n-type 3C-SiC nanoarrays. The highly oriented and large-scale SiC nanoarrays were grown on the 6H-SiC wafer via pyrolysis of polyureasilazane by adjusting the thicknesses of Au films used as the catalysts. The densities of the nanoarrays were tunable to be ∼2.9 × 10{sup 7}, ∼4.0 × 10{sup 7}, and ∼5.7 × 10{sup 7} nanowires/cm{sup 2} by controlling the Au film thicknesses of 50, 70, and 90 nm, respectively. The measured FE characteristics disclosed that the turn-on fields of the samples could be tailored to be of ∼1.79, 1.57, and 1.95 V/μm with the increase of the densities, suggesting that a suitable nanowire density could favor the enhanced electron emission from the SiC nanoarrays with improved emission sites and limited field screening effects.
CdMnTe films were prepared on quartz substrates by closed-space sublimation of polycrystalline Cd{sub 0.74}Mn{sub 0.26}Te powders. This was performed at different substrate temperatures (T{sub s} = 200, 300, 350, and 400 °C). The interfacial adhesion strength between the films and substrates, when fabricated from polycrystalline powders, was greater than that of films grown using a bulk source. X-ray diffraction studies revealed that the as-deposited films had a zinc blende structure with a preferential (111) orientation. Precipitation of Te occurred in the films deposited at T{sub s} = 200 °C, as confirmed using scanning electron microscopy, x-ray diffraction, and Raman spectroscopy. The growth mode and re-evaporation dependence on the value of T{sub s} of the films were investigated. Our results suggested that materials suitable for radiation detection can be grown from a powder source at lower substrate temperatures then when grown from a bulk source.
Abstract not provided