Engineering Papers⌕ Search

Engineering topics

Wang, Lin-Wang

Publications and source records attributed to Wang, Lin-Wang.

At least 127 records · Page 7

Electronic Properties of Electrical Vortices in Ferroelectric Nanocomposites from Large-Scale Ab Initio Computations

An original ab initio procedure is developed and applied to a ferroelectric nanocomposite, in order to reveal the effect of electrical vortices on electronic properties. Such procedure involves the combination of two large-scale numerical schemes, namely, the effective Hamiltonian (to incorporate ionic degrees of freedom) and the linear-scaling three-dimensional fragment method (to treat electronic degrees of freedom). The use of such procedure sheds some light into the origin of the recently observed current that is activated at rather low voltages in systems possessing electrical vortices. Finally, it also reveals a novel electronic phenomena that is a systematic control of the type of the band-alignment (i.e., type I versus type II) within the same material via the temperature-driven annihilation/formation of electrical topological defects.

band alignment↗

Fully self-consistent solution of the Dyson equation using a plane-wave basis set

Self-consistent solutions of the Dyson equation are obtained using a plane-wave basis set for seven small molecules. Such self-consistent solutions can help to unify the different GW self-consistent schemes, reduce the scatter of results in current GW calculations, and shed light on the true effects of GW self-consistency. Unlike other works of self-consistent GW calculations, in the present work the Green's function is expressed as a matrix under the plane-wave basis set. The algorithmic details which enable such calculations are presented. Finally, the ability to solve the full Green's function using a plane-wave basis set may open the door for future beyond- GW many-body perturbation theory calculations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Nanoscale charge localization induced by random orientations of organic molecules in hybrid perovskite CH3NH3PbI3.

Perovskite-based solar cells have achieved high solar-energy conversion efficiencies and attracted wide attentions nowadays. Despite the rapid progress in solar-cell devices, many fundamental issues of the hybrid perovskites have not been fully understood. Experimentally, it is well-known that in CH3NH3PbI3 the organic molecules CH3NH3 are randomly orientated at the room temperature, but the impact of the random molecular orientation has not been investigated. Because of the dipole moment of the organic molecule, the random orientation creates a novel system with long-range potential fluctuations unlike alloys or other conventional disordered systems. Using linear scaling ab initio methods, we find that the charge densities of the conduction band minimum and the valence band maximum are localized in nanoscales due to the potential fluctuations. The charge localization causes electron-hole separation and reduces carrier recombination rates, which may contribute to the long carrier lifetime observed in experiments.

Ma, Jie↗

Oxygen vacancy and hole conduction in amorphous TiO 2

The amorphous titanium dioxide (a-TiO2) has drawn attention recently due to the finding that it holds promise for coating conventional photoelectrodes for corrosion protection while still allowing the holes to transport to the surface. The mechanism of hole conductivity at a level much higher than the edge of the valence band is still a mystery. In this work, an amorphous TiO2 model is obtained from molecular dynamics employing the “melt-and-quench” technique. The electronic properties, polaronic states and the hole conduction mechanism in amorphous structure were investigated by means of density functional theory with Hubbard's energy correction (DFT + U) and compared to those in crystalline (rutile) TiO2. The formation energy of the oxygen vacancy was found to reduce significantly (by a few eV) upon amorphization. Our theoretical study suggested that the oxygen vacancies and their defect states provide hopping channels, which are comparable to experimental observations and could be responsible for hole conduction in the “leaky” TiO2 recently discovered for the photochemical water-splitting applications.

Marcus theory↗

Facet development during platinum nanocube growth

An understanding of how facets of a nanocrystal develop is critical for controlling nanocrystal shape and designing novel functional materials. Yet, the atomic pathways of nanocrystal facet development are mostly unknown because of the lack of direct observation.We report the imaging of platinum nanocube growth in a liquid cell using transmission electron microscopy with high spatial and temporal resolution. The growth rates of all low index facets are similar until the {100} facets stop growth. The continuous growth of the rest facets leads to a nanocube. Our calculation reflects that the much lower ligand mobility on the {100} facets is responsible for the arresting of {100} growing facets. These results shed light on nanocrystal shape-control mechanisms and future design of nanomaterials.

Liao, Hong-Gang↗

Revealing the Atomic Restructuring of Pt–Co Nanoparticles

We studied Pt-Co bimetallic nanoparticles during oxidation in O2 and reduction in H2 atmospheres using an aberration corrected environmental transmission electron microscope. During oxidation Co migrates to the nanoparticle surface forming a strained epitaxial CoO film. It subsequently forms islands via strain relaxation. The atomic restructuring is captured as a function of time. During reduction cobalt migrates back to the bulk, leaving a monolayer of platinum on the surface.

36 MATERIALS SCIENCE↗

Atomic and electronic structures of lattice mismatched Cu 2 O/TiO 2 interfaces

Heterojunction interfaces between metal oxides are often highly lattice mismatched. The atomic and electronic structures of such interfaces, however, are not well understood. Here, we have synthesized Cu 2 O/TiO 2 heterojunction thin films with 13% lattice mismatch and studied the interface via experimental methods and large-scale density function theory calculations of supercells containing 1300 atoms. We find that an interface of epitaxial quality is formed via a coincidence site lattice of 8 Cu 2 O unit cells matching 9 TiO 2 unit cells. Calculations reveal the existence of a dislocation core of the O sublattices at the interface and a random arrangement of one layer of interfacial Cu atoms. The interfacial electronic structure is found to be mostly determined by the interfacial Cu distribution, rather than by the O dislocation core. The conduction band minimum and valence band maximum states are spatially separated, and there is no strongly localized state near the core.

74 ATOMIC AND MOLECULAR PHYSICS↗

In-Gap States in Electronic Structure of Nonpolar Surfaces of Insulating Metal Oxides

Ab initio calculations show that a cleanly cleaved nonpolar surface of considered nonmagnetic insulating metal oxides always has a band gap. If the bulk valence band edge has mainly oxygen 2p character while the bulk conduction band edge has mainly metal d character, then there is no in-the-band-gap surface state. A simple procedure to identify the polarity of a given arbitrary surface is presented.

Chemistry↗

An efficient atomistic quantum mechanical simulation on InAs band-to-band tunneling field-effect transistors

We have presented a fully atomistic quantum mechanical simulation method on band-to-band tunneling (BTBT) field-effect transistors (FETs). Our simulation approach is based on the linear combination of bulk band method with empirical pseudopotentials, which is an atomist method beyond the effective-mass approximation or k.p perturbation method, and can be used to simulate real-size devices (∼10{sup 5} atoms) efficiently (∼5 h on a few computational cores). Using this approach, we studied the InAs dual-gate BTBT FETs. The I-V characteristics from our approach agree very well with the tight-binding non-equilibrium Green's function results, yet our method costs much less computationally. In addition, we have studied ways to increase the tunneling current and analyzed the effects of different mechanisms for that purpose.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Hole Transfer Dynamics from a CdSe/CdS Quantum Rod to a Tethered Ferrocene Derivative

Hole transfer between a CdSe/CdS core/shell semiconductor nanorod and a surface-ligated alkyl ferrocene is investigated by a combination of ab initio quantum chemistry calculations and electrochemical and time-resolved photoluminescence measurements. The calculated driving force for hole transfer corresponds well with electrochemical measurements of nanorods partially ligated by 6-ferrocenylhexanethiolate. The calculations and the experiments suggest that single step hole transfer from the valence band to ferrocene is in the Marcus inverted region. Additionally, time-resolved photoluminescence data suggest that two-step hole transfer to ferrocene mediated by a deep trap state is unlikely. However, the calculations also suggest that shallow surface states of the CdS shell could play a significant role in mediating hole transfer as long as their energies are close enough to the nanorod highest occupied molecular orbital energy. Regardless of the detailed mechanism of hole transfer, our results suggest that holes may be extracted more efficiently from well-passivated nanocrystals by reducing the energetic driving force for hole transfer, thus minimizing energetic losses.

Chemistry↗

PbS Nanoparticles Capped with Tetrathiafulvalenetetracarboxylate: Utilizing Energy Level Alignment for Efficient Carrier Transport

We manufacture a field-effect transistor by covalently functionalizing PbS nanoparticles with tetrathiafulvalenetetracarboxylate. Following experimental results from cyclic voltammetry and ambient-pressure X-ray photoelectron spectroscopy, we postulate a near-resonant alignment of the PbS 1S h state and the organic HOMO, which is confirmed by atomistic calculations. Considering the large width of interparticle spacing, we observe an abnormally high field-effect hole mobility, which we attribute to the postulated resonance. In opposition to nanoparticle devices coupled through common short-chained ligands, our system maintains a large degree of macroscopic order as revealed by X-ray scattering. This provides a contrasting approach to the design of hybrid organic-inorganic nanomaterials, circumvents the problem of phase segregation, and holds for versatile ways to design ordered, coupled nanoparticle thin films.

field-effect transistors↗

Double-hole-induced oxygen dimerization in transition metal oxides

Rather than being free carriers or separated single-hole polarons, double holes in anatase TiO${}_{2}$ prefer binding with each other, to form an O-O dimer after large structural distortion. This pushes the hole states upward into the conduction band and traps the holes. Similar double-hole-induced O-O dimerization (a bipolaron) exists in other transition metal oxides (TMOs) such as V${}_{2}$O${}_{5}$ and MoO${}_{3}$, which have the highest valence bands composed mainly of O 2p states, loose lattices, and short O-O distances. Since the dimerization can happen in impurity-free TMO lattices, independent of any extrinsic dopant, it acts as an intrinsic and general limit to the p-type conductivity in these TMOs.

Chen, Shiyou↗

Enhancement of band-to-band tunneling in mono-layer transition metal dichalcogenides two-dimensional materials by vacancy defects

The band-to-band tunneling of monolayer transition metal dichalcogenides nano-junction is investigated using atomistic ab initio quantum transport simulations. From the simulation, it is found that the transition metal vacancy defect in the two-dimensional MX{sub 2} (M = Mo,W; X = S,Se) band-to-band tunneling diode can dramatically boost the on-state current up to 10 times while maintaining the device sub-threshold swing. The performance enhancement mechanism is discussed in detail by examining partial density of states of the system. It is found that the transition metal vacancy induces band-gap states, which reduce the effective length of the tunneling transition region.

36 MATERIALS SCIENCE↗

Phase stability and defect physics of a ternary ZnSnN(2) semiconductor: first principles insights.

First-principles calculations show that ZnSnN2 has a very small formation enthalpy, and the donor defects such as SnZn antisites and ON impurities have high concentration, making the material degenerately n-type, which explains the observed high electron concentration. ZnSnN2 can be regarded as a new material that combines a metal-like conductivity with an optical bandgap around 2 eV.

Chen, Shiyou↗

Fast plane wave density functional theory molecular dynamics calculations on multi-GPU machines

Plane wave pseudopotential (PWP) density functional theory (DFT) calculation is the most widely used method for material simulations, but its absolute speed stagnated due to the inability to use large scale CPU based computers. By a drastic redesign of the algorithm, and moving all the major computation parts into GPU, we have reached a speed of 12 s per molecular dynamics (MD) step for a 512 atom system using 256 GPU cards. This is about 20 times faster than the CPU version of the code regardless of the number of CPU cores used. Our tests and analysis on different GPU platforms and configurations shed lights on the optimal GPU deployments for PWP-DFT calculations. An 1800 step MD simulation is used to study the liquid phase properties of GaInP.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗