Engineering Papers⌕ Search

Engineering topics

Wang, Lin-Wang

Publications and source records attributed to Wang, Lin-Wang.

At least 91 records · Page 5

Reply to “Comment on ‘Comparative study of ab initio nonradiative recombination rate calculations under different formalisms’ ”

As pointed out by the comments of Wickramaratne et al., there was indeed an algebra error in our original publication [Phys. Rev. B 91, 205315 (2015)] in calculating the 1D model. We have corrected this error, and did a renewed calculation and comparison of the 1D model and other approximated models. The revised comparison provides some insights for the origin of the difference between the full phonon spectrum electron-phonon coupling static formula results and other approximated results, especially for how to evaluate the amplitude of electron-phonon coupling.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Strongly Quantum Confined Colloidal Cesium Tin Iodide Perovskite Nanoplates: Lessons for Reducing Defect Density and Improving Stability

We report that within the last several years, metal halide perovskites such as methylammonium lead iodide, CH 3 NH 3 PbI 3 , have come to the forefront of scientific investigation as defect-tolerant, solution-processable semiconductors that exhibit excellent optoelectronic properties. The vast majority of study has focused on Pb-based perovskites, which have limited applications because of their inherent toxicity. To enable the broad application of these materials, the properties of lead-free halide perovskites must be explored. Here, two-dimensional, lead-free cesium tin iodide, (CsSnI 3 ), perovskite nanoplates have been synthesized and characterized for the first time. These CsSnI 3 nanoplates exhibit thicknesses of less than 4 nm and exhibit significant quantum confinement with photoluminescence at 1.59 eV compared to 1.3 eV in the bulk. Ab initio calculations employing the generalized gradient approximation of Perdew-Burke-Ernzerhof elucidate that although the dominant intrinsic defects in CsSnI 3 do not introduce deep levels inside the band gap, their concentration can be quite high. These simulations also highlight that synthesizing and processing CsSnI 3 in Sn-rich conditions can reduce defect density and increase stability, which matches insights gained experimentally. Lastly, this improvement in the understanding of CsSnI 3 represents a step toward the broader challenge of building a deeper understanding of Sn-based halide perovskites and developing design principles that will lead to their successful application in optoelectronic devices.

36 MATERIALS SCIENCE↗

Electrochemical Reaction Mechanism of the MoS 2 Electrode in a Lithium-Ion Cell Revealed by in Situ and Operando X-ray Absorption Spectroscopy

As a typical transition metal dichalcogenide, MoS 2 offers numerous advantages for nanoelectronics and electrochemical energy storage due to its unique layered structure and tunable electronic properties. When used as the anode in lithium-ion cells, MoS 2 undergoes intercalation and conversion reactions in sequence upon lithiation, and the reversibility of the conversion reaction is an important but still controversial topic. Here, we clarify unambiguously that the conversion reaction of MoS 2 is not reversible, and the formed Li 2 S is converted to sulfur in the first charge process. Li 2 S/sulfur becomes the main redox couple in the subsequent cycles and the main contributor to the reversible capacity. In addition, due to the insulating nature of both Li 2 S and sulfur, a strong relaxation effect is observed during the cycling process. This study clearly reveals the electrochemical lithiation-delithiation mechanism of MoS 2 , which can facilitate further developments of high-performance MoS 2 -based electrodes.

25 ENERGY STORAGE↗

Effects of the c-Si/a-SiO 2 interfacial atomic structure on its band alignment: an ab initio study

The crystalline-Si/amorphous-SiO 2 (c-Si/a-SiO 2 ) interface is an important system used in many applications, ranging from transistors to solar cells. The transition region of the c-Si/a-SiO 2 interface plays a critical role in determining the band alignment between the two regions. However, the question of how this interface band offset is affected by the transition region thickness and its local atomic arrangement is yet to be fully investigated. Here in this study, by controlling the parameters of the classical Monte Carlo bond switching algorithm, we have generated the atomic structures of the interfaces with various thicknesses, as well as containing Si at different oxidation states. A hybrid functional method, as shown by our calculations to reproduce the GW and experimental results for bulk Si and SiO 2 , was used to calculate the electronic structure of the heterojunction. This allowed us to study the correlation between the interface band characterization and its atomic structures. We found that although the systems with different thicknesses showed quite different atomic structures near the transition region, the calculated band offset tended to be the same, unaffected by the details of the interfacial structure. Our band offset calculation agrees well with the experimental measurements. This robustness of the interfacial electronic structure to its interfacial atomic details could be another reason for the success of the c-Si/a-SiO 2 interface in Si-based electronic applications. Nevertheless, when a reactive force field is used to generate the a-SiO 2 and c-Si/a-SiO 2 interfaces, the band offset significantly deviates from the experimental values by about 1 eV

14 SOLAR ENERGY↗

Effect of strain and thickness on the transition temperature of epitaxial FeRh thin-films

The separate effects of strain and film thickness on the antiferromagnetic-to-ferromagnetic phase transition temperature of FeRh thin films by both experiment and density functional calculations were determined. Strain was introduced by epitaxial growth onto MgO, SrTiO 3 , and KTaO 3 substrates. Film thicknesses below 15 nm substantially suppress the transition temperature, T, to below room temperature in unstrained films. For strained films, tensile/compressive strain decreases/increases T, respectively. KTaO 3 (001) substrates produce sufficient compressive strain to increase the transition temperature of 10 nm FeRh films above room temperature, which is useful for many proposed applications previously limited by the stabilization of the ferromagnetic state at small thicknesses. These results demonstrate that a judicious use of film thickness and substrate can be used to manipulate FeRh's transition temperature over a ~200 K range.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Curved-line search algorithm for ab initio atomic structure relaxation

Ab initio atomic relaxations often take large numbers of steps and long times to converge, especially when the initial atomic configurations are far from the local minimum or there are curved and narrow valleys in the multidimensional potentials. An atomic relaxation method based on on-the-flight force learning and a corresponding curved-line search algorithm is presented to accelerate this process. In this work, results demonstrate the superior performance of this method for metal and magnetic clusters when compared with the conventional conjugate-gradient method.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Dynamic Disorder and Potential Fluctuation in Two-Dimensional Perovskite

The structural and electronic properties of 2D perovskite (C 4 H 9 NH 3 ) 2 PbBr 4 are investigated from first-principles calculations. It is found that despite the existence of carbon chain, the organic molecule C 4 H 9 NH 3 in 2D perovskite is able to rotate at room temperature, showing a highly dynamic behavior. The dynamic disorder of C 4 H 9 NH 3 introduces dynamic potential fluctuation, which is sufficient to localize the wave function and to separate the valence band maximum and conduction band minimum states. We further showed that, rather than a pure dipole rotation model, the disorder effect of the molecules can be better described by the motion of the net charge centers of the molecules, which contributes to the potential fluctuation. Therefore, polar molecule is not the necessary condition to create potential fluctuation in perovskite, which is further demonstrated by the calculations of 2D inorganic perovskite Cs 2 PbBr 4 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Excess Li-Ion Storage on Reconstructed Surfaces of Nanocrystals To Boost Battery Performance

Abstract. Due to the enhanced kinetic properties, nanocrystallites have received much attention as potential electrode materials for energy storage. However, because of the large specific surface areas of nanocrystallites, they usually suffer from decreased energy density, reduced cycling stability and total electrode capacity. In this work, we report a size-dependent excess capacity beyond the theoretical value of 170 mAhg-1 in a special carbon coated LiFePO4 composite cathode material, which delivers capacities of 191.2 and 213.5 mAhg-1 with the mean particle sizes of 83 nm and 42 nm, respectively. Moreover, this LiFePO4 composite also shows excellent cycling stability and high rate performance. Our further experimental tests and ab initio calculations reveal that the excess capacity comes from the charge passivation for which the C-O-Fe bonds would lead to charge redistribution on the surface of LiFePO4 and hence to enhance the bonding interaction between surface O atoms and Li-ions. The surface reconstruction for excess Li-ion storage makes full use of the large specific surface area for the nanocrystallites, which can maintain the fast Li-ion transport and enhance the capacity greatly that the nanocrystallites usually suffers.

Duan, Yandong↗

First-principles Green-Kubo method for thermal conductivity calculations

We present a first-principles approach to calculate the phonon thermal conductivity based on the Green-Kubo formalism. In this approach, the density functional theory energy is distributed to each atom, and a two-step method in the molecular dynamics is introduced to avoid the atomic position R wrapping problem in a periodic system when the heat current is calculated. We show that this first-principles Green-Kubo approach is particularly suitable for disordered systems like amorphous and liquid, where the thermal conductivities are small due to strong phonon scattering but difficult to be calculated using anharmonic interaction energy. We have applied our method to liquid Ar, liquid Si, and amorphous Si. In this work, the calculated thermal conductivities agree well with previous theoretical and experimental results. We have also compared our method to previous works combining first-principles simulations with the Green-Kubo formalism.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Tunable Anisotropic Photon Emission from Self-Organized CsPbBr 3 Perovskite Nanocrystals

In this paper, we report controllable anisotropic light emission of photons originating from vertically aligned transition dipole moments in spun-cast films of CsPbBr 3 nanocubes. By depositing films of nanocrystals on precoated substrates we can control the packing density and resultant radiation pattern of the emitted photons. We develop a technical framework to calculate the average orientation of light emitters, i.e., the angle between the transition dipole moment vector (TDM) and the substrate. This model is applicable to any emissive material with a known refractive index. Theoretical modeling indicates that oriented emission originates from an anisotropic alignment of the valence band and conduction band edge states on the ionic crystal lattice and demonstrates a general path to model the experimentally less accessible internal electric field of a nanosystem from the photoluminescent anisotropy. The uniquely accessible surface of the perovskite nanoparticles allows for perturbation of the normally isotropic emissive transition. Finally, the reported sensitive and tunable TDM orientation and control of emitted light will allow for applications of perovskite nanocrystals in a wide range of photonic technologies inaccessible to traditional light emitters.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

The Nature of Electron Mobility in Hybrid Perovskite CH 3 NH 3 PbI 3

The peroskovite CH 3 NH 3 PbI 3 one of the most promising candidates for cheap and high-efficiency solar cells. One of its unique features is the long carrier diffusion length (>100 μm), but its carrier mobility is rather modest. The nature of the mobility is unclear. Here, using nonadiabatic wave function dynamics simulations, we show that the random rotations of the CH 3 NH 3 cations play an important role in the carrier mobility. Our previous work showed that the electron and hole wave functions were localized and spatially separated due to the random orientations of the CH 3 NH 3 cations in the tetragonal phase. We find that the localized carriers are able to conduct random walks due to the electrostatic potential fluctuation caused by the CH 3 NH 3 random rotations. The calculated electron mobilities are in the experimentally measured range. We thus conclude that the carrier mobility of CH 3 NH 3 PbI 3 is likely driven by the dynamic disorder that causes the fluctuation of the electrostatic potential.

14 SOLAR ENERGY↗

Glass-like energy and property landscape of Pt nanoclusters

Pt nanoclusters play an important role in catalysis-related applications. Essential to their activities are their geometries and energy landscapes. In this work, we studied the energy landscapes of Pt clusters using a parallel differential evolution optimization algorithm and an accelerated ab initio atomic relaxation method, which allowed us to explore unprecedentedly large numbers of geometry local minima at ab initio level. We found many lower-energy isomers with low symmetry in their geometry. The energy landscapes were demonstrated to be glass-like with a large number of local minimum structures close to the global minimum. The electronic and magnetic properties of most glass-like local minima were dramatically different from the global minimum, and they should be observed in the experimental measurements. The connections between these local minima were further analyzed using data mining techniques.

Chen, Zhanghui↗

GPU implementation of the linear scaling three dimensional fragment method for large scale electronic structure calculations

LS3DF, namely linear scaling three-dimensional fragment method, is an efficient linear scaling ab initio total energy electronic structure calculation code based on a divide-and-conquer strategy. In this paper, we present our GPU implementation of the LS3DF code. Our test results show that the GPU code can calculate systems with about ten thousand atoms fully self-consistently in the order of 10 min using thousands of computing nodes. This makes the electronic structure calculations of 10,000-atom nanosystems routine work. This speed is 4.5–6 times faster than the CPU calculations using the same number of nodes on the Titan machine in the Oak Ridge leadership computing facility (OLCF). Such speedup is achieved by (a) carefully re-designing of the computationally heavy kernels; (b) redesign of the communication pattern for heterogeneous supercomputers.

Computer Science↗

Fully converged plane-wave-based self-consistent G W calculations of periodic solids

The GW approximation is a well-known method to obtain the quasiparticle and spectral properties of systems ranging from molecules to solids. In practice, GW calculations are often employed with many different approximations and truncations. In this work, we describe the implementation of a fully self-consistent GW approach based on the solution of the Dyson equation using a plane wave basis set. Algorithmic, numerical, and technical details of the self-consistent GW approach are presented. The fully self-consistent GW calculations are performed for GaAs, ZnO, and CdS including semicores in the pseudopotentials. No further approximations and truncations apart from the truncation on the plane wave basis set are made in our implementation of the GW calculation. After adopting a special potential technique, a ~100Ry energy cutoff can be used without the loss of accuracy. We found that the self-consistent GW (sc-GW) significantly overestimates the bulk band gaps, and this overestimation is likely due to the underestimation of the macroscopic dielectric constants. On the other hand, the sc-GW accurately predicts the d-state positions, most likely because the d-state screening does not sensitively depend on the macroscopic dielectric constant. Our work indicates the need to include the high-order vertex term in order for the many-body perturbation theory to accurately predict the semiconductor band gaps. Further, it also sheds some light on why, in some cases, the G 0 W 0 bulk calculation is more accurate than the fully self-consistent GW calculation, because the initial density-functional theory has a better dielectric constant compared to experiments.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

High Defect Tolerance in Lead Halide Perovskite CsPbBr 3

The formation energies and charge-transition levels of intrinsic point defects in lead halide perovskite CsPbBr 3 are studied from first-principles calculations. It is shown in this study that the formation energy of dominant defect under Br-rich growth condition is much lower than that under moderate or Br-poor conditions. Thus avoiding the Br-rich condition can help to reduce the defect concentration. Interestingly, CsPbBr 3 is found to be highly defect-tolerant in terms of its electronic structure. Most of the intrinsic defects induce shallow transition levels. Only a few defects with high formation energies can create deep transition levels. Therefore, CsPbBr 3 can maintain its good electronic quality despite the presence of defects. Such defect tolerance feature can be attributed to the lacking of bonding–antibonding interaction between the conduction bands and valence bands.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗