Engineering topics
Publications and source records attributed to Wang, K..
In the original PDF online version of this article, DOI: 10.1140/epja/s10050-020-00135-7, the references 22–26 were missing.
Control of impurities, fuel recycling and hydrogen content by lithium evaporative coatings and real-time lithium powder injection (LPI) in EAST are studied for high performance H-mode discharges of up to ~100 s. The results show that the lithium evaporative coatings significantly reduced both the low-Z impurity carbon and high-Z impurity tungsten as well as molybdenum concentration in the plasmas, and the impurities concentration significantly reduced with the accumulated lithium coatings and maintained well afterwards. Specifically the high-Z tungsten core impurity concentration was maintained between 3 ppm–15 ppm during the 101 s H-mode discharge, which is acceptable for the long pulse operation. In addition, real-time wall conditioning via LPI successfully reduced the core high-Z metal impurities by 50% during ~35 s long pulse H-mode discharge, exhibiting strong compatibility between real-time LPI with long pulse discharges. In addition, evaporative lithium coatings demonstrated fuel recycling control, with fuel recycling obviously reducing with lithium coatings and maintaining well afterwards. Also, the lithium evaporative coatings reduced the hydrogen minority species content, represented by the density ratio H/(H + D), from ~50% down to ~5% with accumulated lithium coatings; low hydrogen fraction improved the ICRF minority heating efficiency. Finally the real-time LPI reduced the recycling coefficient R global from 0.95 to 0.82. With these wall conditionings help, the plasma density controlled well during the 101 s long pulse H-mode discharge. Furthermore, these results provide valuable references on impurities, fuel recycling and hydrogen content control for future longer pulse high performance H-mode operation (≥400 s) in EAST and future fusion devices.
Explore the source record for details and available documents.
Fast timing detectors are an essential element in the experimental setup for time-of-flight (ToF) mass measurements of unstable nuclei. We have upgraded the scintillator detectors used in experiments at the National Superconducting Cyclotron Laboratory (NSCL) by increasing the number of photomultiplier tubes that read out their light signals to four per detector, and characterized them in a test experiment with 48 Ca beam at the NSCL. The new detectors achieved a time resolution (σ) of 7.5 ps. We systematically investigated different factors that affect their timing performance. In addition, we evaluated the ability of positioning the hitting points on the scintillator using the timing information and obtained a resolution (σ) below 1 mm for well-defined beam spots.
Measurements of elastic electron scattering data within the past decade have highlighted two-photon exchange contributions as a necessary ingredient in theoretical calculations to precisely evaluate hydrogen elastic scattering cross sections. This correction can modify the cross section at the few percent level. In contrast, dispersive effects can cause significantly larger changes from the Born approximation. The purpose of this experiment is to extract the carbon-12 elastic cross section around the first diffraction minimum, where the Born term contributions to the cross section are small to maximize the sensitivity to dispersive effects. The analysis uses the LEDEX data from the high resolution Jefferson Lab Hall A spectrometers to extract the cross sections near the first diffraction minimum of 12 C at beam energies of 362 MeV and 685 MeV. The results are in very good agreement with previous world data, although with less precision. The average deviation from a static nuclear charge distribution expected from linear and quadratic fits indicate a 30.6% contribution of dispersive effects to the cross section at 1 GeV. The magnitude of the dispersive effects near the first diffraction minimum of 12 C has been confirmed to be large with a strong energy dependence and could account for a large fraction of the magnitude for the observed quenching of the longitudinal nuclear response. These effects could also be important for nuclei radii extracted from parity-violating asymmetries measured near a diffraction minimum.
Cross-sectional scanning tunneling microscopy (X-STM) is used to experimentally study the influence of isovalent Bi atoms on the electronic structure of InP. In this work, we map the spatial pattern of the Bi impurity state, which originates from Bi atoms down to the sixth layer below the surface, in topographic, filled-state X-STM images on the natural {110} cleavage planes. The Bi impurity state has a highly anisotropic bowtielike structure and extends over several lattice sites. These Bi-induced charge redistributions extend along the $\langle$110$\rangle$ directions, which define the bowtielike structures we observe. Local tight-binding calculations reproduce the experimentally observed spatial structure of the Bi impurity state. In addition, the influence of the Bi atoms on the electronic structure is investigated in scanning tunneling spectroscopy measurements. These measurements show that Bi induces a resonant state in the valence band, which shifts the band edge toward higher energies. Furthermore, we show that the energetic position of the Bi-induced resonance and its influence on the onset of the valence band edge depend crucially on the position of the Bi atoms relative to the cleavage plane.
Not Available
In this work, we investigate the depinning dynamics of two-dimensional dusty plasmas driven over one-dimensional periodic substrates using Langevin dynamical simulations. We find that, for a specific range of substrate strengths, as the external driving force increases from zero, there are three different states, which are the pinned, the disordered plastic flow, and the moving ordered states, respectively. These three states are clearly observed using different diagnostics, including the collective drift velocity, static structural measures, the particle trajectories, the mean-squared displacements, and the kinetic temperature. Overall, we compare the observed depinning dynamics here with the depinning dynamics in other systems.
In this study, we implement the Heisenberg principle into the Constrained Molecular Dynamics model with a similar approach to the Pauli principle using the one-body occupation probability $\bar{f}_i$. Results of the modified and the original model with comparisons to data are given. The binding energies and the radii of light nuclei obtained with the modified model are more consistent with the experimental data than the original one. The collision term and the density distribution are tested through a comparison to p+ 12 C elastic scattering data. Some simulations for fragmentation and superheavy nuclei production are also discussed.
In this work we studied the production of the theranostic radionuclide 67 Cu (t 1/2 =62h) via the reaction of a 70 Zn beam at 15 MeV/nucleon with a hydrogen gas target. The 67 Cu radionuclide, alongside other coproduced isotopes, was collected after the gas target on an Al catcher foil. Radioactivity was measured by offline gamma-ray analysis. After 36h from the end of the irradiation, apart from the product of interest 67Cu, the main radioimpurity coming from the 70 Zn+p reaction was $^{69m}$Zn (t 1/2 =13.8h). Moreover, along with the radionuclide of interest produced in inverse kinematics, the production of additional radioisotopes is possible by making use of the forward-focused neutrons from the reaction and letting them interact with a secondary target. A preliminary test of this concept was realized in the present study. The main requirement to obtain activities appropriate for preclinical studies is the development of high-intensity heavy-ion primary beams.
Not Available
We investigate the phonon spectra of two-dimensional liquid dusty plasmas on a one-dimensional periodic substrate using numerical simulations. The propagation of the waves across the potential wells of the substrate is inhibited due to the confinement of the dust particles by the substrate minima. If the substrate wells are narrow or deep, one-dimensional chains of particles are formed in each minimum, and the longitudinal motion of an individual chain dominates the propagation of waves along the potential wells of the substrate. Increasing the width or decreasing the depth of the substrate minima allows the particles to buckle into a zigzag structure, and the resulting spectra develop two branches, one for sloshing motion and one for breathing motion. Lastly, the repulsion between neighboring dust particles produces backward propagation of the sloshing wave for small wave numbers.
Using the multiconfiguration Dirac–Fock method, calculations for the lowest 62 levels of the ([Ar] 3d{sup 10})4s{sup 2}4p{sup 5}, ([Ar] 3d{sup 10})4s{sup 2}4p{sup 3}4d{sup 2}, ([Ar] 3d{sup 10})4s{sup 2}4p{sup 4}4d, ([Ar] 3d{sup 10})4s4p{sup 6}, and ([Ar] 3d{sup 10})4s4p{sup 5}4d configurations are performed for the bromine isoelectronic sequence La XXIII-Dy XXXII, W XL. Results of energy levels, lifetimes, wavelengths, and electric dipole, magnetic dipole, electric quadrupole, and magnetic quadrupole radiative rates are presented. In order to assess the accuracy of results, independent calculations for W XL have been carried out using the many-body perturbation theory (MBPT) method. Comparisons are made with available theoretical results from other calculations and the observed values of the Atomic Spectra Database of the National Institute of Standards and Technology. Energy levels are estimated to be accurate to better than 1%, and radiative rates (and lifetimes) are accurate to better than 20% for a majority of strong transitions. These results should be useful in many applications of lanthanide ions related to broad area of research such as applied physics, laser physics and fusion science.
Highlights: • A complete and accurate data set of excitation energies, lifetimes, wavelengths and E1, M1, E2, M2 and E3 line strengths, transition rates, and oscillator strengths for Ga-like to Br-like Gd ions is reported. • The Multi-configuration Dirac–Hartree–Fock method is employed. • The effects of core–valence electron correlation from the deep subshells 3d and 3p have been investigated. • The computed excitation energies from the present MCDHF calculations of the VV+CV{sub 3d}+CV{sub 3p} model agree well with the experimental values. The differences are less than ±0.1% for most of the levels. - Abstract: Theoretical calculations of Ga-like to Br-like gadolinium ions were performed by using the fully relativistic multi-configuration Dirac–Hartree–Fock (MCDHF) method. Extensive lists of excitation energies, wavelengths, line and oscillator strengths, and E1, M1, E2, M2, and E3 transition rates are presented. The effects of core–valence electron correlation from the deep subshells 3d and 3p are investigated and the accuracy of the results is confirmed by comparing with available theoretical and experimental data sets.
Explore the source record for details and available documents.
Not Available