Engineering Papers⌕ Search

Engineering topics

Wang, John

Publications and source records attributed to Wang, John.

At least 37 records · Page 2

Mesoporous nanocrystalline film architecture for capacitive storage devices

A mesoporous, nanocrystalline, metal oxide construct particularly suited for capacitive energy storage that has an architecture with short diffusion path lengths and large surface areas and a method for production are provided. Energy density is substantially increased without compromising the capacitive charge storage kinetics and electrode demonstrates long term cycling stability. Charge storage devices with electrodes using the construct can use three different charge storage mechanisms immersed in an electrolyte: (1) cations can be stored in a thin double layer at the electrode/electrolyte interface (non-faradaic mechanism); (2) cations can interact with the bulk of an electroactive material which then undergoes a redox reaction or phase change, as in conventional batteries (faradaic mechanism); or (3) cations can electrochemically adsorb onto the surface of a material through charge transfer processes (faradaic mechanism).

25 ENERGY STORAGE↗

Ferroelectricity emerging in strained (111)-textured ZrO{sub 2} thin films

(Anti-)ferroelectricity in complementary metal-oxide-semiconductor (CMOS)-compatible binary oxides have attracted considerable research interest recently. Here, we show that by using substrate-induced strain, the orthorhombic phase and the desired ferroelectricity could be achieved in ZrO{sub 2} thin films. Our theoretical analyses suggest that the strain imposed on the ZrO{sub 2} (111) film by the TiN/MgO (001) substrate would energetically favor the tetragonal (t) and orthorhombic (o) phases over the monoclinic (m) phase of ZrO{sub 2}, and the compressive strain along certain 〈11-2〉 directions may further stabilize the o-phase. Experimentally ZrO{sub 2} thin films are sputtered onto the MgO (001) substrates buffered by epitaxial TiN layers. ZrO{sub 2} thin films exhibit t- and o-phases, which are highly (111)-textured and strained, as evidenced by X-ray diffraction and transmission electron microscopy. Both polarization-electric field (P-E) loops and corresponding current responses to voltage stimulations measured with appropriate applied fields reveal the ferroelectric sub-loop behavior of the ZrO{sub 2} films at certain thicknesses, confirming that the ferroelectric o-phase has been developed in the strained (111)-textured ZrO{sub 2} films. However, further increasing the applied field leads to the disappearance of ferroelectric hysteresis, the possible reasons of which are discussed.

36 MATERIALS SCIENCE↗

Ternary metal fluorides as high-energy cathodes with low cycling hysteresis

In this study, transition metal fluorides are an appealing alternative to conventional intercalation compounds for use as cathodes in next-generation lithium batteries due to their extremely high capacity (3–4 times greater than the current state-of-the-art). However, issues related to reversibility, energy efficiency and kinetics prevent their practical application. Here we report on the synthesis, structural and electrochemical properties of ternary metal fluorides (M 1 y M 2 1-y F x : M 1 , M 2 = Fe, Cu), which may overcome these issues. By substituting Cu into the Fe lattice, forming the solid–solution Cu y Fe 1-y F 2 , reversible Cu and Fe redox reactions are achieved with surprisingly small hysteresis (<150 mV). This finding indicates that cation substitution may provide a new avenue for tailoring key electrochemical properties of conversion electrodes. In conclusion, although the reversible capacity of Cu conversion fades rapidly, likely due to Cu + dissolution, the low hysteresis and high energy suggest that a Cu-based fluoride cathode remains an intriguing candidate for rechargeable lithium batteries.

36 MATERIALS SCIENCE↗

Integration and Testing of LCS Software

Kennedy Space Center is in the midst of developing a command and control system for the launch of the next generation manned space vehicle. The Space Launch System (SLS) will launch using the new Spaceport Command and Control System (SCCS). As a member of the Software Integration and Test (SWIT) Team, command scripts, and bash scripts were written to assist in integration and testing of the Launch Control System (LCS), which is a component of SCCS. The short term and midterm tasks are for the most part completed. The long term tasks if time permits will require a presentation and demonstration.

Command Script↗

Photovoltaic effect in an indium-tin-oxide/ZnO/BiFeO{sub 3}/Pt heterostructure

We have studied the photovoltaic effect in a metal/semiconductor/ferroelectric/metal heterostructure of In{sub 2}O{sub 3}-SnO{sub 2}/ZnO/BiFeO{sub 3}/Pt (ITO/ZnO/BFO/Pt) multilayer thin films. The heterolayered structure shows a short-circuit current density (J{sub sc}) of 340 μA/cm{sup 2} and an energy conversion efficiency of up to 0.33% under blue monochromatic illumination. The photovoltaic mechanism, specifically in terms of the major generation site of photo-excited electron-hole (e-h) pairs and the driving forces for the separation of e-h pairs, is clarified. The significant increase in photocurrent of the ITO/ZnO/BFO/Pt compared to that of ITO/BFO/Pt is attributed to the abundant e-h pairs generated from ZnO. Ultraviolet photoelectron spectroscopy reveals the energy band alignment of ITO/ZnO/BFO/Pt, where a Schottky barrier and an n{sup +}-n junction are formed at the BFO/Pt and ZnO/BFO interfaces, respectively. Therefore, two built-in fields developed at the two interfaces are constructively responsible for the separation and transport of photo-excited e-h pairs.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A Numerical and Experimental Study of Damage Growth in a Composite Laminate

The present study has three goals: (1) perform an experiment where a simple laminate damage process can be characterized in high detail; (2) evaluate the performance of existing commercially available laminate damage simulation tools by modeling the experiment; (3) observe and understand the underlying physics of damage in a composite honeycomb sandwich structure subjected to low-velocity impact. A quasi-static indentation experiment has been devised to provide detailed information about a simple mixed-mode damage growth process. The test specimens consist of an aluminum honeycomb core with a cross-ply laminate facesheet supported on a stiff uniform surface. When the sample is subjected to an indentation load, the honeycomb core provides support to the facesheet resulting in a gradual and stable damage growth process in the skin. This enables real time observation as a matrix crack forms, propagates through a ply, and then causes a delamination. Finite element analyses were conducted in ABAQUS/Explicit(TradeMark) 6.13 that used continuum and cohesive modeling techniques to simulate facesheet damage and a geometric and material nonlinear model to simulate core crushing. The high fidelity of the experimental data allows a detailed investigation and discussion of the accuracy of each numerical modeling approach.

McElroy, Mark↗

Analysis of CSIRT/SOC Incidents and Continuous Monitoring of Threats

Security Operations Centers (SOC) contain a wealth of data which, if properly classified and tagged upfront, can yield a wealth of real-time information about your organizations IT Security posture, risks, and threats. These include answers to relevant and actionable questions such as: What are our biggest threats? Who is attacking us and what do they want? What controls are working or not working? How effective was the new technology we just implemented? What is our ROI?

Wang, John↗

Valence-driven electrical behavior of manganese-modified bismuth ferrite thin films

BiFe{sub 0.95}R{sub 0.05}O{sub 3} (Mn{sup 2+}, Mn{sup 3+}, and Mn{sup 4+}) thin films with (110) orientation were fabricated on SrRuO{sub 3}/Pt/TiO{sub 2}/SiO{sub 2}/Si(100) substrates via rf sputtering. With the increasing valence of Mn in BiFe{sub 0.95}R{sub 0.05}O{sub 3}, the concentration of Fe{sup 2+} increases, whereas the concentration of oxygen vacancies decreases. The electrical properties of BiFe{sub 0.95}R{sub 0.05}O{sub 3} are correlated with the valence of Mn. Their leakage current density is dependent on the concentration of oxygen vacancies caused by different valences of Mn. Their P-E loops become better with the increasing valence of Mn owing to a lower leakage current density in high electric field regions, and a large remanent polarization of 2P{sub r} {approx} 145.2 {mu}C/cm{sup 2} is obtained for the Mn{sup 4+}-doped film. For the Mn{sup 2+}-doped bismuth ferrite film, the space-charge-limited conduction and Schottky barrier dominate its leakage behavior under a negative electric field, the Ohmic conduction and Schottky barrier are involved in the leakage behavior under a positive electric field, and the interface-limited Fowler-Nordheim tunneling is their dominant mechanism in a high electric field region. In contrast, an Ohmic conduction dominates the leakage behavior of Mn{sup 3+}- and Mn{sup 4+}-doped films regardless of negative and positive directions or measurement temperatures.

36 MATERIALS SCIENCE↗

Combined effects of bilayer structure and ion substitutions on bismuth ferrite thin films

To understanding the combined effects of bilayer structure and ion substitutions on electrical behavior of BiFeO{sub 3} thin films, the Bi{sub 0.90}La{sub 0.10}Fe{sub 0.90}Zn{sub 0.10}O{sub 3}/Bi{sub 0.90}La{sub 0.10}Fe{sub 0.90}Sn{sub 0.10}O{sub 3} bilayers with different thickness ratios were fabricated on SrRuO{sub 3}/Pt/TiO{sub 2}/SiO{sub 2}/Si(100) substrates by radio frequency sputtering. Their dielectric constant increases and the fatigue endurance becomes better with increasing Bi{sub 0.90}La{sub 0.10}Fe{sub 0.90}Zn{sub 0.10}O{sub 3} thickness ratios. The bilayer with the thickness ratio of 210: 90 exhibits a high remanent polarization, and a better fatigue behavior is induced by higher driving electric fields and frequencies.

36 MATERIALS SCIENCE↗

Growth rate induced monoclinic to tetragonal phase transition in epitaxial BiFeO{sub 3} (001) thin films

Epitaxial BiFeO{sub 3} thin films were deposited on SrRuO{sub 3} buffered SrTiO{sub 3} (001) substrates at different growth rates by varying the radio frequency sputtering power. With increasing growth rate, the crystal structure of BiFeO{sub 3} films develops from monoclinic lattice to a mixture phase of tetragonal lattice T{sub 1} with c/a{approx}1.05 and giant tetragonal lattice T{sub 2} with c/a{approx}1.23, finally to a single tetragonal phase T{sub 2}, as shown by high resolution synchrotron x-ray diffraction reciprocal space mappings. The observed phase transitions, induced by film growth rate, offer an alternative strategy to manipulate crystalline phases in epitaxial ferroelectric thin films.

36 MATERIALS SCIENCE↗

Mutual Ferromagnetic-Ferroelectric Coupling in Multiferroic Copper-Doped ZnO

A mutual ferromagnetic and ferroelectric coupling (multiferroic behavior) in Cu-doped ZnO is demonstrated via deterministic control of Cu doping and defect engineering. The coexistence of multivalence Cu ions and oxygen vacancies is important to multiferroic behaviors in ZnO:Cu. The samples show clear ferroelectric and ferromagnetic domain patterns. These domain structures may be written reversibly via electric and magnetic bias.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

ZnO as a buffer layer for growth of BiFeO{sub 3} thin films

Multiferroic BiFeO{sub 3} thin film was grown on the ZnO-buffered Pt/TiO{sub 2}/SiO{sub 2}/Si(100) substrate by off-axis radio frequency magnetron sputtering, where the ZnO buffer layer gave rise to a strong (110) texture for the BiFeO{sub 3} thin film. The resulting BiFeO{sub 3}/ZnO thin film exhibits diode-like and resistive hysteresis behavior, in which the resistive hysteresis and rectifying ratio are dependent on the applied voltage and temperature. The resistive switching behavior of the BiFeO{sub 3}/ZnO thin film is shown to relate to the trap-controlled space charge limited conduction and interface-limited Fowler-Nordheim tunneling, while the polarization reversal takes place in the BiFeO{sub 3} layer of the heterostructure. The BiFeO{sub 3}/ZnO thin film is also demonstrated with a higher remanent polarization (2P{sub r{approx}}153.6 {mu}C/cm{sup 2}), a much lower dielectric loss (tan {delta}{approx}0.012), and a better fatigue endurance as compared to those of the BiFeO{sub 3} thin film without a ZnO buffer layer, where the much reduced leakage is largely responsible for the enhanced ferroelectric behavior. The ZnO as a buffer layer for BiFeO{sub 3} significantly changes the dielectric relaxation and conduction mechanisms, when the dielectric relaxation and electrical conduction are governed by the thermal excitation of carriers from the second-ionization and short-range motion of oxygen vacancies, respectively, while the relaxation process remains the same over the entire temperature range of 20 to 200 deg. C investigated in the present study.

36 MATERIALS SCIENCE↗

Anatomy of a Security Operations Center

Many agencies and corporations are either contemplating or in the process of building a cyber Security Operations Center (SOC). Those Agencies that have established SOCs are most likely working on major revisions or enhancements to existing capabilities. As principle developers of the NASA SOC; this Presenters' goals are to provide the GFIRST community with examples of some of the key building blocks of an Agency scale cyber Security Operations Center. This presentation viII include the inputs and outputs, the facilities or shell, as well as the internal components and the processes necessary to maintain the SOC's subsistence - in other words, the anatomy of a SOC. Details to be presented include the SOC architecture and its key components: Tier 1 Call Center, data entry, and incident triage; Tier 2 monitoring, incident handling and tracking; Tier 3 computer forensics, malware analysis, and reverse engineering; Incident Management System; Threat Management System; SOC Portal; Log Aggregation and Security Incident Management (SIM) systems; flow monitoring; IDS; etc. Specific processes and methodologies discussed include Incident States and associated Work Elements; the Incident Management Workflow Process; Cyber Threat Risk Assessment methodology; and Incident Taxonomy. The Evolution of the Cyber Security Operations Center viII be discussed; starting from reactive, to proactive, and finally to proactive. Finally, the resources necessary to establish an Agency scale SOC as well as the lessons learned in the process of standing up a SOC viII be presented.

Wang, John↗