Engineering topics
Wang, J
Publications and source records attributed to Wang, J.
A MRPC prototype for SOLID-TOF in Jlab
A prototype of Multi-gap Resistive Plate Chamber (MRPC) for the future SoLID time of flight system at JLab has been developed. The counter, trapezoidal in shape, is assembled with the newly developed low-resistive Chinese glass. It has 10 × 0.25 mm gas gaps and 11 readout strips of different lengths. The strip width is 2.5 cm with a strip-to-strip interval of 3 mm. Preliminary tests performed with cosmic-rays showed an efficiency higher than 95% and a time resolution around 50 ps. Results under diffuse/uniform irradiation performed at JLab with scattered high energy electrons showed a time resolution of 70–80 ps and over-95% efficiency up to an incoming flux of 15 kHz/cm{sup 2}. These performances meet the requirements of the new time of flight system SoLID-TOF.
Overview of the 2010 Carbonaceous Aerosols and Radiative Effects Study (CARES)
Substantial uncertainties still exist in the scientific understanding of the possible interactions between urban and natural (biogenic) emissions in the production and transformation of atmospheric aerosol and the resulting impact on climate change. The U.S. Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) program's Carbonaceous Aerosol and Radiative Effects Study (CARES) carried out in June 2010 in Central Valley, California, was a comprehensive effort designed to improve this understanding. The primary objective of the field study was to investigate the evolution of secondary organic and black carbon aerosols and their climate-related properties in the Sacramento urban plume as it was routinely transported into the forested Sierra Nevada foothills area. Urban aerosols and trace gases experienced significant physical and chemical transformations as they mixed with the reactive biogenic hydrocarbons emitted from the forest. Two heavily-instrumented ground sites - one within the Sacramento urban area and another about 40 km to the northeast in the foothills area - were set up to characterize the evolution of meteorological variables, trace gases, aerosol precursors, aerosol size, composition, and climate-related properties in freshly polluted and 'aged' urban air. On selected days, the DOE G-1 aircraft was deployed to make similar measurements upwind and across the evolving Sacramento plume in the morning and again in the afternoon. The NASA B-200 aircraft, carrying remote sensing instruments, was also deployed to characterize the vertical and horizontal distribution of aerosols and aerosol optical properties within and around the plume. This overview provides: a) the scientific background and motivation for the study, b) the operational and logistical information pertinent to the execution of the study, c) an overview of key observations and initial results from the aircraft and ground-based sampling platforms, and d) a roadmap of planned data analyses and focused modeling efforts that will facilitate the integration of new knowledge into improved representations of key aerosol processes in climate models.
Pyramidal Light Trapping and Hydrogen Passivation for High-Efficiency Heteroepitaxial (100) Crystal Silicon Solar Cells
No abstract prepared.
Pressure tuning of competing magnetic interactions in intermetallic CeFe 2
Not Available
Compressibility and strength of nanocrystalline tungsten boride under compression to 60 GPa
The compression behavior and stress state of nanocrystalline tungsten boride (WB) were investigated using radial x-ray diffraction (RXRD) in a diamond-anvil cell under non-hydrostatic compression up to 60.4 GPa. The compression properties and stress state are analyzed using lattice strain theory. Experiments were conducted at beamline X17C of the National Synchrotron Light Source. The radial x-ray diffraction data yield a bulk modulus that is qualitatively consistent with density functional theory calculations and demonstrate that WB is a highly incompressible material. A maximum differential stress, t, of about 14 GPa can be supported by nanocrystalline WB at the highest pressure. This corresponds to about 5% of the shear modulus, G, which is smaller than the values of t/G ({approx}8%-10%) observed for BC{sub 2}N, B{sub 6}O, TiB{sub 2}, and {gamma}-Si{sub 3}N{sub 4} at high pressures. Thus, while WB is highly incompressible, its strength is relatively low at high pressures compared to other hard ceramics.
Programmably structured plasma waveguide for development of table-top photon and particle sources
Programmable fabrication of longitudinal spatial structures in an optically preformed plasma waveguide in a gas jet was achieved, by using laser machining with a liquid-crystal spatial light modulator as the pattern mask. Fabrication of periodic structures with a minimal period of 200 {mu}m and density-ramp structures with a minimal slope length of 100 {mu}m was attained. The technique is useful for the optimization of various laser-plasma-based photon and particle sources.
Assessment of impacts of PHEV charging patterns on wind-thermal scheduling by stochastic unit commitment.
Abstract not provided
Special Issue on Nanostructures by Electrochemical Anodization
Abstract not provided