Engineering topics

Wang, Hong

Publications and source records attributed to Wang, Hong.

At least 109 records · Page 6

DOE OSTI2020

Phase evolution and amorphous stability upon solid-state reaction in superlattice like Ge–Sb–Te combinatorial thin-film

In this paper, the superlattice-like (SLL) Ge–Sb–Te combinatorial thin films were prepared by using a high-throughput ion beam sputtering system. The phase evolution and amorphous stability of such films undergoing heat treatment as a function of the coating sequence and modulation period were systematically studied. The composition structure diagram was constructed via an automated process of data obtained by high-throughput synchrotron micro-X-ray diffraction and lab-based micro-X-ray fluorescence. Furthermore, the element distribution and microstructure in the depth direction of the SLL thin films were characterized with time-of-flight secondary ion mass spectrometry and transmission electron microscopy, respectively. These studies demonstrated that the coating sequence has a significant effect on the element distribution in the as-deposited SLL thin films and the structure of the final product upon solid-state reaction. Reducing the modulation period of the SLL thin film improves the stability of the amorphous Ge–Sb–Te phase. This work lays a solid foundation for the rational design of SLL Ge–Sb–Te thin films to improve their performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2020

Collaborative Fault Tolerant Control of Non-Signalized Intersections for Connected and Autonomous Vehicles

With the potential of increased penetration of connected and autonomous vehicles (CAVs), intersectional signal control faces new challenges in terms of its operation and implementation. One possibility is to fully make use of the communication capabilities of CAVs so that intersectional signal control can be realized by CAVs alone – this leads to non-signalized intersectional operation for traffic networks in urban areas. In this paper, the state-of-the-art on collaborative fault tolerant control schemes for complex systems will be briefly described. This is then followed by the formulation of operational fault tolerant control that realizes the collaborative fault tolerance functionality at CAVs operational level in response to possible individual vehicle faults, where detailed modelling using vehicle movement dynamics will be described together with the construction of fast fault diagnosis and a collaborative fault tolerant control algorithm. A simple example will be given as well to demonstrate the proposed algorithm together with the discussions on other issues such as randomness of the system, communication errors and full energy consideration. These leads to several future directions of the research for the traffic flow control of non-signalized intersections with 100% penetration of CAVs.

Wang, Hong↗

DOE OSTI2020

Robust Online Sequential RVFLNs for Data Modeling of Dynamic Time-Varying Systems with Application of an Ironmaking Blast Furnace

In a world where the increasing complexity of modern industrial processes brings difficulties for accurate mathematical modeling, taking advantage of data has become an efficient solution to complex dynamic process modeling issue. In this paper, we develop a novel robust online sequential version of random vector functional-link networks (RVFLNs) for data-driven modeling of dynamic time-varying system and applied it in a blast furnace (BF) ironmaking process. First, to overcome the time-varying dynamics of process and to enable the RVFLNs to learn online with avoiding data saturation, an improved online sequential version of RVFLNs (OS-RFVLNs) is first presented by online sequential learning with forgetting factor. This improved OS-RVFLNs algorithm is not only suitable for the real-time and large data transfer situation, but also can adjust the sensitivity of the algorithm to different samples with the help of the introduced forgetting factor. Second, since the output weights of the improved OS-RVFLNs as well as other RVFLNs algorithms are obtained by the least squares approach, a robustness problem may occur when the training dataset is contaminated with various outliers. To solve this problem, a Cauchy distribution weighted M-estimator is introduced to improve the robustness of the improved OS- RVFLNs. For this proposed robust OS-RVFLNs (R-OS- RVFLNs), since the weights of different outlier data are properly determined by the Cauchy distribution function, their corresponding contribution on modeling can be properly distinguished. Thus robust and better modeling results can be achieved. Experiments using actual industrial data of BF ironmaking process and comparative studies have demonstrated that the proposed method produces a better estimation accuracy and stronger robustness than other methods.

Blast furnace (BF), Modelling, Dynamic systems↗

DOE OSTI2020

Nickel(II) Bisporphyrin‐Fused Pentacenes Exhibiting Abnormal High Stability

Abstract A series of largely π‐extended multichromophoric molecules including cross‐conjugated, half cross‐conjugated, conjugation‐interrupted and linearly conjugated systems were synthesized and characterized. These multichromophoric molecular systems revealed interesting structural‐property relationships. Bisporphyrin‐fused pentacenes Pen‐1 b and Pen‐2 a showed rich redox chemistry with 7 and 8 observable redox states, respectively. The linearly‐conjugated bisporphyrin‐fused pentacenes ( Pen‐1 b and Pen‐2 a ) possess much narrower HOMO–LUMO gaps (1.65 and 1.42 eV redox, respectively) and higher HOMO energy levels than those of their pentacene analogues (2.23 and 2.01 eV redox, respectively), similar to those of much less stable hexacenes and heptacenes. An estimated half‐life of >945 h was obtained for bisporphyrin‐fused pentacene Pen‐2 a , which is much longer than that of its pentacene analogue ( BPE‐P , half‐life, 33 h).

Hu, Yi↗

DOE OSTI2020

Sister Rod Destructive Examinations (FY20), Appendix F: Cyclic Integrated Reversible-Bending Fatigue Tests

This report documents work performed under the Spent Fuel and Waste Disposition’s Spent Fuel and Waste Science and Technology program for the US Department of Energy (DOE) Office of Nuclear Energy (NE). This work was performed to fulfill Level 2 Milestone M2SF-21OR010201032, “ORNL High Burnup Confirmatory Demo Sibling Rod Testing Results,” within work package SF-21OR01020103 and is an update to the work reported in M2SF-19ORO010201026 and M2SF-19OR010201028.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

DOE OSTI2020

Modeling and Control Using Stochastic Distribution Control Theory for Intersection Traffic Flow

In this work, we investigated stochastic distribution control theory-based traffic signal optimization to achieve a smooth and uniform flow of vehicles through signalized intersections. In this context, the static and linear dynamic stochastic distribution models were developed to express the relationship between the signal timing and the traffic queue length together with its probability density function. Two stochastic distribution control algorithms were designed to control the signal timing at intersections such that the probability density function of the traffic queue of each intersection road segment is made as narrow and as small as possible. Also, a recursive input-output traffic queue estimation model was proposed, which is data-driven and dynamic in nature, to calculate real-time traffic queue length using traffic signal timings and loop-detector data. The control algorithms were evaluated for a one-signal corridor, two-signal corridor, and 2 x 2 network of signalized intersections. MATLAB simulation examples are provided to demonstrate the use of the proposed algorithms and comparison to the existing widely-used semi-actuated control has been made. Desired results were obtained.

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2020

Fault diagnosis and fault tolerant control for T-S fuzzy stochastic distribution systems subject to sensor and actuator faults

The problem of fault diagnosis (FD) and fault tolerant control (FTC) for a class of Takagi-Sugeno (T-S) fuzzy stochastic distribution control (SDC) systems subject to sensor and actuator faults is discussed in this paper. First, fuzzy logic models are used to approximate the output probability density function (PDF). Next, an adaptive augmented state/fault diagnosis observer is proposed to estimate the system state, sensor and the actuator faults simultaneously. New expected weights based on the sensor fault estimation information and a PI-type fuzzy feedback fault tolerant (FT) controller are designed to compensate the effect of sensor fault and actuator fault simultaneously. When the sensor fault occurs, the expected objective is redesigned to compensate the sensor fault. Meanwhile, the PI controller can compensate the effect of actuator fault, and the output PDF of the system can still track the desired PDF after the fault occurs. Finally, an example of quality distribution control in chemical reaction process is given to confirm the effectiveness of the algorithm.

42 ENGINEERING↗

DOE OSTI2020

A Synthetic Approach to β-Functionalized Naphtho[2,3]porphyrins

A concise synthetic method has been developed to access functionalized naphtho[2,3]porphyrins through combining two sequence reactions involving a Heck–electrocyclization–aromatization sequence and a Wittig–Knovenegal sequence. Using this method, mononaphtho[2,3]porphyrin (NP-1), opp-dinaphtho[2,3]porphyrin (NP-2), and push–pull naphtho[2,3]porphyrin (NP-3) have been prepared. These naphtho[2,3]porphyrins displayed interesting optical and electrochemical properties. As a result, excellent efficiencies of singlet oxygen generation were obtained for these naphtho[2,3]porphyrins.

Absorption↗

DOE OSTI2020

Nickel(II) Bisporphyrin-Fused Pentacenes Exhibiting Abnormal High Stability

Not provided.

Chemistry↗

DOE OSTI2020

Drought shrinks terrestrial upland resilience to climate change

Abstract Aim Drought has been shown to alter terrestrial ecosystem carbon (C) and nitrogen (N) dynamics, and thus feedback to future climate. However, drought‐induced changes in terrestrial upland C and N pools and the drought response of soil carbon dioxide (CO 2 ) and nitrous oxide (N 2 O) fluxes are yet to be quantified. Location Global upland ecosystems. Time period 2000–2018. Major taxa studied Terrestrial C and N fluxes. Methods A meta‐analysis was conducted that compiled 1,344 measurements from 128 manipulative studies worldwide to obtain a general picture of terrestrial C and N cycling responses to soil drought stress and identify the primary driving factors. Results We showed that drought significantly decreased plant C pools, with stronger negative responses of aboveground than belowground C components. Drought significantly decreased soil respiration ( R S ) and N 2 O fluxes by 19% and 29%, respectively. There were non‐significant changes in soil organic C and N pools in response to drought; in contrast to a considerable decrease in soil dissolved organic C (−22%), there was a robust increase in soil nitrate‐N (26%) following short‐term drought impact. By relating net ecosystem productivity (NEP) to the difference between net primary production (NPP) and soil heterotrophic respiration ( R H ), drought was found to drive a decrease up to −37% in NEP, being equivalent to a reduction in terrestrial net C uptake of 2.91 t C/ha. Main conclusions Our study provides insights into soil release of CO 2 and N 2 O with a linkage to the changes in terrestrial C and N pools in response to drought across upland biomes. Our findings highlight that, despite the lowered soil C release rate, the capacity of upland biomes as a C sink to slow climate change would still be weakened due to a robust decline of plant‐derived C input to soil in a future drier climate.

Zheng, Yajing↗

DOE OSTI2020

Inverse design of two-dimensional graphene/h-BN hybrids by a regressional and conditional GAN

Design of materials with desired properties is currently laborious and heavily relies on intuition of researchers through a trial-and-error process. To tackle this challenge, in this work we propose a novel regressional and conditional generative adversarial network (RCGAN) for inverse design of representative two-dimensional materials, the graphene and boron-nitride (BN) hybrids. RCGAN incorporates a supervised regressor network, thus overcoming the common technical barrier in the traditional unsupervised GANs, which cannot generate data when fed with continuous and quantitative labels. RCGAN can autonomously generate graphene/BN hybrids given any target bandgap values. These structures are distinguished from the ones used for training and exhibit high diversity for a given bandgap. Moreover, they exhibit high fidelity, yielding bandgaps within ~10% MAE F of the desired bandgaps as validated by density functional theory (DFT) calculations. Analysis by the principle component analysis (PCA) and modified locally linear embedding (MLLE) reveals that the generator has successfully generated structures following the statistical distribution of the real structures. It implies the possibility of the RCGAN in recognizing physical rules hidden in the high-dimensional data. The novel strategy for designing regressional GAN architecture together with the successful application to inverse design of materials would inspire further exploration in research fields beyond materials.

36 MATERIALS SCIENCE↗

DOE OSTI2020

Probability Density Function Control for Stochastic Nonlinear Systems using Monte Carlo Simulation

This paper presents a fast implementation framework of output probability density function (PDF) control for a class of stochastic nonlinear systems which are subjected to non-Gaussian noises. The statistical properties of the system outputs can be adjusted by shaping the dynamic output probability density function to track the reference stochastic distribution. However, the dynamic probability density function evolution is very difficult to obtain analytically even if the system model and the stochastic distributions of the noises are known. Motivated by Monte Carlo simulation, the dynamic probability density function can be estimated by sampling data which forms the contribution of this paper. In particular, the sampling points are generated following the stochastic distribution of the noise for each instant. These points go through the system would generate the histogram for system outputs, then the dynamic model can be established based on the dynamic histogram which reflects the randomness and the nonlinear dynamics of the investigated system. Based on the established model, the output probability density function tracking can be achieved and the simulation results and discussions show the effectiveness and benefits of the presented framework.

Zhang, Qichun↗

DOE OSTI2020

Projected Future Changes in Tropical Cyclones Using the CMIP6 HighResMIP Multimodel Ensemble

Future changes in tropical cyclone properties are an important component of climate change impacts and risk for many tropical and midlatitude countries. In this study we assess the performance of a multimodel ensemble of climate models, at resolutions ranging from 250 to 25 km. We use a common experimental design including both atmosphere-only and coupled simulations run over the period 1950–2050, with two tracking algorithms applied uniformly across the models. There are overall improvements in tropical cyclone frequency, spatial distribution, and intensity in models at 25 km resolution, with several of them able to represent very intense storms. Projected tropical cyclone activity by 2050 generally declines in the South Indian Ocean, while changes in other ocean basins are more uncertain and sensitive to both tracking algorithm and imposed forcings. Coupled models with smaller biases suggest a slight increase in average TC 10 m wind speeds by 2050.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2020

Revealing the Structural Evolution and Phase Transformation of O3-Type NaNi 1/3 Fe 1/3 Mn 1/3 O 2 Cathode Material on Sintering and Cycling Processes

O-type layered oxide cathode materials can be easily synthesized for a full sodium stoichiometry with high specific capacity, but they all suffer from a capacity fade on cycling. The sintering process control and optimization are critical to ensure a high quality and consistency of the prepared cathode materials with stable structure. Herein, in situ high-energy X-ray diffraction (HEXRD) was first employed to investigate the phase evolution of the oxides during the sintering process of O3-type NaNi 1/3 Fe 1/3 Mn 1/3 O 2 . The in situ HEXRD and both operando Bragg coherent diffraction (BCXD) and coherent multicrystal diffraction (CMCD) were utilized to investigate the phase transformation of the cathode materials during the sodiation/desodiation process. A composite structure comprised of O-type and P-type oxides was formed after the initial electrochemical activation of the cathode material, resulting in good structural and electrochemical stability. This finding implies that strain engineering can be a new design philosophy for the development of next generation high-performance sodium ion cathodes.

25 ENERGY STORAGE↗

DOE OSTI2020

Technical Qualification of New Materials for High Efficiency Coal-Fired Boilers and Other Advanced FE Concepts: Haynes® 282® ASME Boiler and Pressure Vessel Code Case

This DOE Fossil Energy project, FEAA117, addressed materials issues relevant to qualifying and deploying a Ni-base alloy for a new application in an advanced ultra-supercritical coal-fired boiler. The goal was the deployment of Haynes International alloy Haynes® 282® for applications in superheaters, reheaters, and steam delivery pipes, by completing base metal, cross-weld and all-weld metal mechanical testing needed for an ASME Boiler and Pressure Vessel Code Case and the associated microstructural analyses needed for assurance of boiler-relevant lifetimes. The alloy also is of interest for other applications including supercritical CO₂ power generation cycles. Tensile testing was completed from 20°-927°C on the three base metal alloy 282 heats, two sets of cross-weld specimens and all weld metal specimens. A total of 148 creep tests with over 565,000 h of cumulative testing was completed on base metal, cross-weld and all weld metal specimens. This project was performed with cost share from Haynes International.

01 COAL, LIGNITE, AND PEAT↗

DOE OSTI2020

Excited state electron transfer in A 2 and A 2 B 2 functionalized zinc porphyrins carrying rigid and flexible β -pyrrole π-extended substituents

Optical absorption and emission, electrochemical, and photochemical properties of peripherally functionalized with flexible and rigid π-extended substituents on A 2 and A 2 B 2 type zinc porphyrins is investigated. The significance of rigid π-substituents over flexible ones in governing the spectral properties is unraveled. Flexible π-substituents on the porphyrin ring caused appreciable spectral broadening compared to porphyrin carrying rigid π-substituents. Further, supramolecular dyads are formed by coordinating phenyl imidazole functionalized fullerene, C 60 Im. Here, the calculated binding constants for the 1:1 complexes is in the order of 2–7 × 10 5 M −1 suggesting stable complex formation. Free-energy calculations performed according to the Rehm–Weller approach suggested possibility of excited state electron transfer in these dyads. Femtosecond transient absorption studies of the dyads performed in o-dichlorobenzene showed evidence of occurrence of electron transfer from the singlet-excited state that was in competition with the intersystem crossing process to populate the triplet-excited state of porphyrins.

A2 and A2B2 functionalized zinc↗

DOE OSTI2020

Systems, methods and patches for monitoring a structural health of a connector in overhead transmission lines

Systems, methods and piezoelectric patches are provided for monitoring the structural health of connectors in overhead transmission lines. A plurality of piezoelectric patches is mounted to different locations on the connector. At least one of the patches is actuated using an AC voltage and certain electrical properties either from the same patch or of a different patch are evaluated over time to determine the structural health of the connectors.

24 POWER TRANSMISSION AND DISTRIBUTION↗

DOE OSTI2020

Investigation of synchrotron X-ray induced oxidation of Ag–Cu thin-film

Combinatorial Ag-Cu thin-films were irradiated by synchrotron X-ray in air to investigate the beam damage on the surface of the thin-film. The main effect was found to be oxidation with the oxidation state primarily depending on film composition: CuO formed on the pure Cu film, whereas Cu 2 O formed in the presence of Ag. Meanwhile, formation of crystalline Ag 2 O 2 was favored and preferentially in the Ag-rich area. Lastly, these results are of great importance in studying the oxidation of noble metal nano-film, and in the characterization of nano-films using synchrotron X-ray.

36 MATERIALS SCIENCE↗