Engineering Papers⌕ Search

Engineering topics

Wang, Hong

Publications and source records attributed to Wang, Hong.

At least 307 records · Page 17

TEST SYSTEM FOR EVALUATING SPENT NUCLEAR FUEL BENDING STIFFNESS AND VIBRATION INTEGRITY

Transportation packages for spent nuclear fuel (SNF) must meet safety requirements specified by federal regulations. For normal conditions of transport, vibration loads incident to transport must be considered. This is particularly relevant for high-burnup fuel (>45 GWd/MTU). As the burnup of the fuel increases, a number of changes occur that may affect the performance of the fuel and cladding in storage and during transportation. The mechanical properties of high-burnup de-fueled cladding have been previously studied by subjecting defueled cladding tubes to longitudinal (axial) tensile tests, ring-stretch tests, ring-compression tests, and biaxial tube burst tests. The objective of this study is to investigate the mechanical properties and behavior of both the cladding and the fuel in it under vibration/cyclic loads similar to the sustained vibration loads experienced during normal transport. The vibration loads to SNF rods during transportation can be characterized by dynamic, cyclic, bending loads. The transient vibration signals in a specified transport environment can be analyzed, and frequency, amplitude and phase components can be identified. The methodology being implemented is a novel approach to study the vibration integrity of actual SNF rod segments through testing and evaluating the fatigue performance of SNF rods at defined frequencies. Oak Ridge National Laboratory (ORNL) has developed a bending fatigue system to evaluate the response of the SNF rods to vibration loads. A three-point deflection measurement technique using linear variable differential transformers is used to characterize the bending rod curvature, and electromagnetic force linear motors are used as the driving system for mechanical loading. ORNL plans to use the test system in a hot cell for SNF vibration testing on high burnup, irradiated fuel to evaluate the pellet-clad interaction and bonding on the effective lifetime of fuel-clad structure bending fatigue performance. Technical challenges include pure bending implementation, remote installation and detachment of the SNF test specimen, test specimen deformation measurement, and identification of a driving system suitable for use in a hot cell. Surrogate test specimens have been used to calibrate the test setup and conduct systematic cyclic tests. The calibration and systematic cyclic tests have been used to identify test protocol issues prior to implementation in the hot cell. In addition, cyclic hardening in unidirectional bending and softening in reverse bending were observed in the surrogate test specimens. The interface bonding between the surrogate clad and pellets was found to impact the bending response of the surrogate rods; confirming this behavior in the actual spent fuel segments will be an important aspect of the hot cell test implementation,

reversal bending fatigue tester↗

Reversible Bending Fatigue Test System for Investigating Vibration Integrity of Spent Nuclear Fuel during Transportation

Transportation packages for spent nuclear fuel (SNF) must meet safety requirements under normal and accident conditions as specified by federal regulations. During transportation, SNF experiences unique conditions and challenges to cladding integrity due to the vibrational and impact loading during road or rail shipment. Oak Ridge National Laboratory (ORNL) has been developing testing capabilities that can be used to improve the understanding of the impacts on SNF integrity due to vibration loading, especially for high burn-up SNF in normal transportation operation conditions. This information can be used to meet the nuclear industry and U.S. Nuclear Regulatory Commission needs in the area of safety and security of spent nuclear fuel storage and transport operations. The ORNL developed test system can perform reversible-bending fatigue testing to evaluate both the static and dynamic mechanical response of SNF rods under simulated loads. The testing apparatus is also designed to meet the challenges of hot-cell operation, including remote installation and detachment of the SNF test specimen, in-situ test specimen deformation measurement, and implementation of a driving system suitable for use in a hot cell. The system contains a U-frame set-up equipped with uniquely designed grip rigs, to protect SNF rod and to ensure valid test results, and use of 3 specially designed LVDTs to obtain the in-situ curvature measurement. A variety of surrogate test rods have been used to develop and calibrate the test system as well as in performing a series of systematic cyclic fatigue tests. The surrogate rods include stainless steel (SS) cladding, SS cladding with cast epoxy, and SS cladding with alumina pellets inserts simulating fuel pellets. Testing to date has shown that the interface bonding between the SS cladding and the alumina pellets has a significant impact on the bending response of the test rods as well as their fatigue strength. The failure behaviors observed from tested surrogate rods provides a fundamental understanding of the underlying failure mechanisms of the SNF surrogate rod under vibration which has not been achieved previously. The newly developed device is scheduled to be installed in the hot-cell in summer 2013 to test high burnup SNF.

high burn-up spent fuel↗

SIRT1 deacetylates RFX5 and antagonizes repression of collagen type I (COL1A2) transcription in smooth muscle cells

Highlights: Black-Right-Pointing-Pointer SIRT1 interacts with and deacetylates RFX5. Black-Right-Pointing-Pointer SIRT1 activation attenuates whereas SIRT1 inhibition enhances collagen repression by RFX5 in vascular smooth muscle cells. Black-Right-Pointing-Pointer SIRT1 promotes cytoplasmic localization and proteasomal degradation of RFX5 and cripples promoter recruitment of RFX5. Black-Right-Pointing-Pointer IFN-{gamma} represses SIRT1 expression in vascular smooth muscle cells. Black-Right-Pointing-Pointer SIRT1 agonist alleviates collagen repression by IFN-{gamma} in vascular smooth muscle cells. -- Abstract: Decreased expression of collagen by vascular smooth muscle cells (SMCs) within the atherosclerotic plaque contributes to the thinning of the fibrous cap and poses a great threat to plaque rupture. Elucidation of the mechanism underlying repressed collagen type I (COL1A2) gene would potentially provide novel solutions that can prevent rupture-induced complications. We have previously shown that regulatory factor for X-box (RFX5) binds to the COL1A2 transcription start site and represses its transcription. Here we report that SIRT1, an NAD-dependent, class III deacetylase, forms a complex with RFX5. Over-expression of SIRT1 or NAMPT, which synthesizes NAD+ to activate SIRT1, or treatment with the SIRT1 agonist resveratrol decreases RFX5 acetylation and disrupts repression of the COL1A2 promoter activity by RFX5. On the contrary, knockdown of SIRT1 or treatment with SIRT1 inhibitors induces RFX5 acetylation and enhances the repression of collagen transcription. SIRT1 antagonizes RFX5 activity by promoting its nuclear expulsion and proteasomal degradation hence dampening its binding to the COL1A2 promoter. The pro-inflammatory cytokine IFN-{gamma} represses COL1A2 transcription by down-regulating SIRT1 expression in SMCs. Therefore, our data have identified as novel pathway whereby SIRT1 maintains collagen synthesis in SMCs by modulating RFX5 activity.

60 APPLIED LIFE SCIENCES↗

ZnWO{sub 4}–Cu system with enhanced photocatalytic activity by photo-Fenton-like synergistic reaction

Highlights: ► A novel coupled system of ZnWO{sub 4}–Cu exhibited much higher catalytic activity than pure ZnWO{sub 4} with H{sub 2}O{sub 2} under UV-light irradiation. ► The enhanced catalytic activity of ZnWO{sub 4}–Cu system was due to the synergistic effect of photocatalysis and Fenton-like process. ► The possible mechanism of the synergistic effect was proposed. -- Abstract: A novel coupled system of ZnWO{sub 4}–Cu, combining two different advanced oxidation processes of photocatalysis and Fenton-like for the degradation of organic dyes, was successfully synthesized. The as-synthesized samples were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS). The nanosized ZnWO{sub 4}–Cu samples exhibited much higher catalytic activity than pure ZnWO{sub 4}. In the presence of the ZC-0.2, the MB solution was completely degraded (the degradation ratio reached 97.79%); while for the ZC-0, the degradation ratio was only 72.29%. The effects of the amount of Cu on the photocatalytic performance of ZnWO{sub 4}–Cu were investigated in detail. The result showed that the synergistic effect between Cu and ZnWO{sub 4} played a key role. The possible mechanism of the synergistic system was proposed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Controlled synthesis of three-dimensional hierarchical Bi{sub 2}WO{sub 6} microspheres with optimum photocatalytic activity

Highlights: Black-Right-Pointing-Pointer The synthesized method is very simple. It can be widely used in the production. Black-Right-Pointing-Pointer The morphology is novel and the property is fine. Black-Right-Pointing-Pointer The formation of 3D hierarchical microsphere can be induced by changing the concentration of KNO{sub 3}. -- Abstract: Three-dimensional (3D) hierarchical Bi{sub 2}WO{sub 6} microsphere and octahedral Bi{sub 2}WO{sub 6} have been synthesized by a facile hydrothermal method using KNO{sub 3} solution and distilled water as solvent, respectively. The obtained products were characterized by X-ray diffraction, scanning electron microscopy, N{sub 2} adsorption/desorption, and UV-vis diffuse reflectance spectroscopy in detail. The concentration of KNO{sub 3} played a key role in the formation of 3D hierarchical Bi{sub 2}WO{sub 6} microspheres. A possible formation mechanism of Bi{sub 2}WO{sub 6} microsphere was proposed. The photocatalytic activity of the as-synthesized products was evaluated by monitoring the degradation of MB solution under sunlight irradiation. It was found that the photocatalytic activity of the 3D hierarchical Bi{sub 2}WO{sub 6} microsphere was superior to the octahedral Bi{sub 2}WO{sub 6}, which was attributed to the larger surface area and special hierarchical structure of Bi{sub 2}WO{sub 6} microsphere.

36 MATERIALS SCIENCE↗

Strength Properties of Aged Poled Lead Zirconate Titanate Subjected to Electromechanical Loadings

Electric field and aging time are two important factors that affect the mechanical strength and long-term reliability of lead zirconate titanate or PZT actuators. In the present work, a commercial PZT-5A aged four years was examined using ball-on-ring (BoR) mechanical testing under coupled electric fields. The electric field range of -3E{sub c} to +3E{sub c} (E{sub c}, coercive electric field) was studied (i.e., -3E{sub c}, -E{sub c}, 0, +E{sub c}, +2E{sub c}, and +3E{sub c}) with a controlled electric loading path. A Weibull distribution was used to interpret the mechanical strength data. With an electric field preloaded from 0 to -3E{sub c}, it was found that subsequent increases in the electric field resulted in an asymmetrical V-shaped curve of mechanical strength against the electric field. The bottom of the V curve was located near the zero electric field level. Microscopy analysis showed that pores were the strength limiter for the tested PZT under electromechanical loadings.

36 MATERIALS SCIENCE↗

Piezoelectric and Dielectric Performance of Poled Lead Zirconate Titanate Subjected to Electric Cyclic Fatigue

Poled lead zirconate titanate (PZT) material as a single-layer plate was tested using piezodilatometer under electric cyclic loading in both unipolar and bipolar modes. Their responses were evaluated using unipolar and bipolar measurements on the same setup. Mechanical strain and charge density or polarization loops exhibited various variations when the material was cycled to more than 10^8 cycles. Important quantities including loop amplitude, hysteresis, switchable polarization, coercive field have been characterized accordingly under corresponding measurement conditions. At the same time, offset polarization and bias electric field of the material were observed to be changed and the trend was found to be related to the measurement condition also. Finally, the piezoelectric and dielectric coefficients were analyzed and their implications to the application of interest have been discussed.

36 MATERIALS SCIENCE↗

Development of a Pulsed Pressure-Based Technique for Cavitation Damage Study

Cavitation occurs in many fluid systems and can lead to severe material damage. To assist the study of cavitation damage, a novel testing method utilizing pulsed pressure was developed. In this talk, the scientific background and the technical approach of this development are present and preliminary testing results are discussed. It is expected that this technique can be used to evaluate cavitation damage under various testing conditions including harsh environments such as those relevant to geothermal power generation.

Ren, Fei↗

Two Strategies for the Development of Mitochondrion-Targeted Small Molecule Radiation Damage Mitigators

Purpose: To evaluate the effectiveness of mitigation of acute ionizing radiation damage by mitochondrion-targeted small molecules. Methods and Materials: We evaluated the ability of nitroxide-linked alkene peptide isostere JP4-039, the nitric oxide synthase inhibitor-linked alkene peptide esostere MCF201-89, and the p53/mdm2/mdm4 protein complex inhibitor BEB55 to mitigate radiation effects by clonogenic survival curves with the murine hematopoietic progenitor cell line 32D cl 3 and the human bone marrow stromal (KM101) and pulmonary epithelial (IB3) cell lines. The p53-dependent mechanism of action was tested with p53{sup +/+} and p53{sup -/-} murine bone marrow stromal cell lines. C57BL/6 NHsd female mice were injected i.p. with JP4-039, MCF201-89, or BEB55 individually or in combination, after receiving 9.5 Gy total body irradiation (TBI). Results: Each drug, JP4-039, MCF201-89, or BEB55, individually or as a mixture of all three compounds increased the survival of 32D cl 3 (p = 0.0021, p = 0.0011, p = 0.0038, and p = 0.0073, respectively) and IB3 cells (p = 0.0193, p = 0.0452, p = 0.0017, and p = 0.0019, respectively) significantly relative to that of control irradiated cells. KM101 cells were protected by individual drugs (p = 0.0007, p = 0.0235, p = 0.0044, respectively). JP4-039 and MCF201-89 increased irradiation survival of both p53{sup +/+} (p = 0.0396 and p = 0.0071, respectively) and p53{sup -/-} cells (p = 0.0007 and p = 0.0188, respectively), while BEB55 was ineffective with p53{sup -/-} cells. Drugs administered individually or as a mixtures of all three after TBI significantly increased mouse survival (p = 0.0234, 0.0009, 0.0052, and 0.0167, respectively). Conclusion: Mitochondrial targeting of small molecule radiation mitigators decreases irradiation-induced cell death in vitro and prolongs survival of lethally irradiated mice.

60 APPLIED LIFE SCIENCES↗

Low-temperature sintering and compatibility with silver electrode of Ba{sub 4}MgTi{sub 11}O{sub 27} microwave dielectric ceramic

Ba{sub 4}MgTi{sub 11}O{sub 27} microwave dielectric ceramic was investigated using X-ray diffraction, scanning electron microscopy and dielectric measurement. The pure Ba{sub 4}MgTi{sub 11}O{sub 27} ceramic shows a high sintering temperature ({approx}1275 {sup o}C) and good microwave dielectric properties as Q x f of 19,630 GHz, {epsilon}{sub r} of 36.1, {tau}{sub f} of 14.6 ppm/{sup o}C. It was found that the addition of BaCu(B{sub 2}O{sub 5}) (BCB) can effectively lower the sintering temperature from 1275 to 925 {sup o}C, and does not induce much degradation of the microwave dielectric properties. The BCB-doped Ba{sub 4}MgTi{sub 11}O{sub 27} ceramics can be compatible with Ag electrode, which makes it a promising ceramic for LTCC technology application.

36 MATERIALS SCIENCE↗

Selection and characterization of a human neutralizing antibody to human fibroblast growth factor-2

Compelling evidences suggest that fibroblast growth factor-2 (FGF-2) plays important roles in tumor growth, angiogenesis and metastasis. Molecules blocking the FGF-2 signaling have been proposed as anticancer agents. Through screening of a human scFv phage display library, we have isolated several human single-chain Fv fragments (scFvs) that bind to human FGF-2. After expression and purification in bacteria, one scFv, named 1A2, binds to FGF-2 with a high affinity and specificity, and completes with FGF-2 binding to its receptor. This 1A2 scFv was then cloned into the pIgG1 vector and expressed in 293T cells. The purified hIgG1-1A2 antibody showed a high binding affinity of 8 x 10{sup -9} M to rhFGF-2. In a set of vitro assays, it inhibited various biological activities of FGF-2 such as the proliferation, migration and tube formation of human umbilical vein endothelial cells. More importantly, hIgG1-1A2 antibody also efficiently blocked the growth while inducing apoptosis of glioma cells. For the first time, we generated a human anti-FGF-2 antibody with proven in vitro anti-tumor activity. It may therefore present a new therapeutic candidate for the treatment of cancers that are dependent on FGF-2 signaling for growth and survival.

60 APPLIED LIFE SCIENCES↗

Alternative approach for cavitation damage study utilizing repetitive laser pulses

Cavitation is a common phenomenon in fluid systems that can lead to dramatic degradation of solid materials surface in contact with the cavitating media. Study of cavitation damage has great significance in many engineering fields. Current techniques for cavitation damage study either require large scale equipments or tend to introduce damages from other mechanisms. In this project, we utilized the cavitation phenomenon induced by laser optical breakdown and developed a prototype apparatus for cavitation damage study. In our approach, cavitation was generated by the repetitive pressure waves induced by high-power laser pulses. As proof of principal study, stainless steel and aluminum samples were tested using the novel apparatus. Surface characterization via scanning electron microscopy revealed damages such as indentation and surface pitting, which were similar to those reported in literature using other state-of-the-art techniques. These preliminary results demonstrated the new device was capable of generating cavitation damages and could be used as an alternative method for cavitation damage study.

36 MATERIALS SCIENCE↗

Fatigue responses of PZT stacks under semi-bipolar electric cycling with mechanical preload

PZT stacks that had an inter-digital internal electrode configuration were tested to more than 10^8 cycles. A 100-Hz semi-bipolar sine wave with a field range of +4.5/-0.9 kV/mm was used in cycling with a concurrently-applied 20 MPa preload. Significant reductions in piezoelectric and dielectric responses were observed during the cycling depending on the measuring condition. Extensive surface discharges were also observed. These surface events resulted in the erosion of external electrode and the outcrop of internal electrode. Sections prepared by sequential polishing technique revealed a variety of damage mechanisms including delaminations, pores, and etch grooves. The scale of damage was correlated to the degree of fatigue-induced reduction in piezoelectric and dielectric responses. The results from this study demonstrate the feasibility of using a semi-bipolar mode to drive a PZT stack under a mechanical preload and illustrate the potential fatigue and damages of the stack in service.

36 MATERIALS SCIENCE↗

STRENGTH PROPERTIES OF POLED PZT SUBJECTED TO BIAXIAL FLEXURAL LOADING IN HIGH ELECTRIC FIELD

Failure of poled PZT has been experimentally studied using ball-on-ring (BoR) biaxial flexure strength tests with an electric field concurrently applied. The as-received and aged PZTs were tested in high electric fields of -3 to 4 times the coercive field. Both the sign and the magnitude of electric field had a significant effect on the strength of poled PZT. A surface flaw type with a depth of around 18 m was identified as the strength limiter and responsible for the failure of the tested PZT. With a value of 0.76 MPa m1/2 in the open circle condition, the fracture toughness of the poled PZT was affected by an applied electric field just as the strength was affected. These results and observations have the potential to serve probabilistic reliability analysis and design optimization of multilayer PZT piezo actuators.

36 MATERIALS SCIENCE↗

CAVITATION DAMAGE STUDY VIA A NOVEL REPETITIVE PRESSURE PULSE APPROACH

Cavitation damage can significantly affect system performance. Thus, there is great interest in characterizing cavitation damage and improving materials resistance to cavitation damage. In this paper, we present a novel methodology to simulate cavitation environment. A pulsed laser is utilized to induce optical breakdown in the cavitation media, with the emission of shock wave and the generation of bubbles. The pressure waves induced by the optical breakdown fluctuate/propagate within the media, which enables the cavitation to occur and to further develop cavitation damage at the solid boundary. Using the repetitive pulsed-pressure apparatus developed in the current study, cavitation damage in water media was verified on stainless steel and aluminum samples. Characteristic cavitation damages such as pitting and indentation are observed on sample surfaces using scanning electron microscopy.

36 MATERIALS SCIENCE↗

CHARACTERIZATION OF POLED SINGLE-LAYER PZT FOR PIEZO STACK IN FUEL INJECTION SYSTEM

Poled single-layer PZT has been characterized in as-extracted and as-received states. PZT plate specimens in the former were extracted from a stack. Flexure strength of PZT was evaluated by using ball-on-ring and 4-point bend tests. Fractography showed that intergranular fractures dominated the fracture surface and that volume pores were the primary strength-limiting flaws. The electric field effect was investigated by testing the PZT in open circuit and coercive field levels. An asymmetrical response on the biaxial flexure strength with respect to the electric field direction was observed. These experimental results will assist reliability design of the piezo stack that is being considered in fuel injection system.

33 ADVANCED PROPULSION SYSTEMS↗

An Innovative Low/High Temperature Repetitive Pressure-Pulse Apparatus for Cavitation Damage Research

Material damage due to cavitation can significantly affect the system performance. Thus, it is of great interest to characterize cavitation damage and to improve materials’ resistance to cavitation damage. In this project, a new methodology has been developed to simulate cavitation environment. A pulsed laser is utilized to induce optical breakdown in the cavitation media. Laser plasma expansion is always accompanied by the emission of shock wave and the generation of the bubbles. In general, plasma expands adiabatically at a supersonic velocity, creating high-pressure shock wave in front of it. As the laser plasma cools the shock front rapidly detaches from the plasma because its velocity is much greater than the particle velocity behind it. The pressure waves induced by the optical breakdown fluctuate/propagate within the media, which enables the cavitation to occur and to further develop cavitation damage at the solid boundary. Several prototypes Repetitive Pulsed-Pressure Apparatus (RPPA) were developed. The verification experiments on stainless steel and aluminum samples are carried out both in tap water and distilled water. The key parameters of the cavitation environment, such as pressure and temperature, were calibrated and benchmarked during the experiments. Characteristic cavitation damages such as pitting and indentation are observed on sample surfaces using scanning electron microscopy. The synergistic effect of combining cavitation and the pulse-heating/media-cooling induced thermal cycling fatigue to the target surface damage was also demonstrated in the report.

36 MATERIALS SCIENCE↗