Engineering Papers⌕ Search

Engineering topics

Wang, Hong

Publications and source records attributed to Wang, Hong.

At least 271 records · Page 15

Fatigue of extracted lead zirconate titanate multilayer actuators under unipolar high field electric cycling

Testing of large prototype lead zirconate titanate (PZT) stacks presents substantial technical challenges to electronic testing systems, so an alternative approach that uses subunits extracted from prototypes has been pursued. Extracted 10-layer and 20-layer plate specimens were subjected to an electric cycle test under an electric field of 3.0/0.0 kV/mm, 100 Hz to 10{sup 8} cycles. The effects of measurement field level and stack size (number of PZT layers) on the fatigue responses of piezoelectric and dielectric coefficients were observed. On-line monitoring permitted examination of the fatigue response of the PZT stacks. The fatigue rate (based on on-line monitoring) and the fatigue index (based on the conductance spectrum from impedance measurement or small signal measurement) were developed to quantify the fatigue status of the PZT stacks. The controlling fatigue mechanism was analyzed against the fatigue observations. The data presented can serve as input to design optimization of PZT stacks and to operation optimization in critical applications, such as piezoelectric fuel injectors in heavy-duty diesel engines.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Reversal bending fatigue testing

Embodiments for apparatuses for testing reversal bending fatigue in an elongated beam are disclosed. Embodiments are configured to be coupled to first and second end portions of the beam and to apply a bending moment to the beam and create a pure bending condition in an intermediate portion of the beam. Embodiments are further configured to cyclically alternate the direction of the bending moment applied to the beam such that the intermediate portion of the beam cyclically bends in opposite directions in a pure bending condition.

42 ENGINEERING↗

Transparent hydrogel with enhanced water retention capacity by introducing highly hydratable salt

Polyacrylamide hydrogels containing salt as electrolyte have been used as highly stretchable transparent electrodes in flexible electronics, but those hydrogels are easy to dry out due to water evaporation. Targeted, we try to enhance water retention capacity of polyacrylamide hydrogel by introducing highly hydratable salts into the hydrogel. These hydrogels show enhanced water retention capacity in different level. Specially, polyacrylamide hydrogel containing high content of lithium chloride can retain over 70% of its initial water even in environment with relative humidity of only 10% RH. The excellent water retention capacities of these hydrogels will make more applications of hydrogels become possible.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Influence of post-deposition annealing on interfacial properties between GaN and ZrO{sub 2} grown by atomic layer deposition

Influence of post-deposition annealing on interfacial properties related to the formation/annihilation of interfacial GaO{sub x} layer of ZrO{sub 2} grown by atomic layer deposition (ALD) on GaN is studied. ZrO{sub 2} films were annealed in N{sub 2} atmospheres in temperature range of 300 °C to 700 °C and analyzed by X-ray photoelectron spectroscopy and high-resolution transmission electron microscopy. It has been found that Ga-O bond to Ga-N bond area ratio decreases in the samples annealed at temperatures lower than 500 °C, which could be attributed to the thinning of GaO{sub x} layer associated with low surface defect states due to “clean up” effect of ALD-ZrO{sub 2} on GaN. However, further increase in annealing temperature results in deterioration of interface quality, which is evidenced by increase in Ga-O bond to Ga-N bond area ratio and the reduction of Ga-N binding energy.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Low-temperature solvothermal synthesis of EuS hollow microspheres

Graphical abstract: Synthesis of EuS hollow microspheres at low-temperature via solvothermal method for the first time. - Highlights: • We adopt an improved method to synthesise the (Phen)Eu(Et{sub 2}CNS{sub 2}){sub 3} in deionized water. • We have successfully synthesised the EuS hollow microsphere at 230 °C in acetonitrile. • The price of acetonitrile is more inexpensive, so the price of preparation was reduced. - Abstract: EuS crystals are synthesized by low-temperature solvothermal decomposition of the single source precursor complex (Phen)Eu(Et{sub 2}CNS{sub 2}){sub 3} in acetonitrile. X-ray powder diffraction, scanning electron microscopy, granulocyte diameter statistical analysis, surface energy-dispersive X-ray spectroscopy analysis, and UV–vis absorption spectroscopy are used to characterize the structure and properties of the obtained EuS crystals. The results show that the formed EuS crystals are uniform hollow microspheres with a typical cubic phase structure of rock salt and the average particle size of 2.01 μm. The mechanisms for the thermal decomposition of the precursor complex and the formation of the EuS hollow microspheres are postulated based on the experimental observations and previous reports.

36 MATERIALS SCIENCE↗

Reversal bending fatigue test system for investigating vibration integrity of spent nuclear fuel during transportation

Transportation packages for spent nuclear fuel (SNF) must meet safety requirements under normal and accident conditions as specified by federal regulations. During transportation, SNF experiences unique conditions and challenges to cladding integrity due to the vibrational and impact loading during road or rail shipment. Oak Ridge National Laboratory (ORNL) has been developing testing capabilities that can be used to improve the understanding of the impacts on SNF integrity due to vibration loading, especially for high burn-up SNF in normal transportation operation conditions. This information can be used to meet the nuclear industry and U.S.Nuclear Regulatory Commission needs in the area of safety and security of SNF storage and transportation operations. The ORNL developed test system can perform reversal bending fatigue testing to evaluate both the static and dynamic mechanical response of SNF rods under simulated loads. The testing apparatus is also designed to meet the challenges of hot cell operation, including remote installation and detachment of the SNF test specimen, in situ test specimen deformation measurement, and implementation of a driving system suitable for use in a hot cell. The system contains a U frame set-up equipped with uniquely designed grip rigs to protect the SNF rod sample and to ensure valid test results, and uses three specially designed linear variable differential transformers to obtain the in situ curvature measurement. A variety of surrogate test rods have been used to develop and calibrate the test system as well as in performing a series of systematic cyclic fatigue tests. The surrogate rods include stainless steel (SS) cladding, SS cladding with cast epoxy and SS cladding with alumina pellet inserts simulating fuel pellets. Testing to date has shown that the interface bonding between the SS cladding and the alumina pellets has a significant impact on the bending response of the test rods as well as their fatigue strength. The failure behaviours observed from tested surrogate rods provide a fundamental understanding of the underlying failure mechanisms of the SNF surrogate rod under vibration,which has not been achieved previously. The newly developed device is scheduled to be installed in the hot cell in summer 2013 to test high burn-up SNF.

high burn up fuel↗

FY14 Status Report: CIRFT Testing Results on High Burnup UNF

The objective of this project is to perform a systematic study of SNF/UNF (spent nuclear fuel/or used nuclear fuel) integrity under simulated transportation environments by using hot cell testing technology developed recently at Oak Ridge National Laboratory (ORNL), CIRFT (Cyclic Integrated Reversible-Bending Fatigue Tester). Under Nuclear Regulatory Commission (NRC) sponsorship, ORNL completed four benchmarking tests, four static tests, and twelve dynamic or cycle tests on H. B. Robinson (HBR) high burn-up (HBU) fuel. With support from the US Department of Energy and the NRC, CIRFT testing has been continued. The CIRFT testing was conducted on three HBR rods (R3, R4, and R5), with two specimens failed and one specimen un-failed. The total number of cycles in the test of un-failed specimens went over 2.23 107; the test was stopped as because the specimen did not show any sign of failure. The data analysis on all the HBR SNF rods demonstrated that it is necessary to characterize the fatigue life of used fuel rods in terms of both the curvature amplitude and the maximum of absolute of curvature extremes. The latter is significant because the maxima of extremes signify the maximum of tensile stress of the outer fiber of the bending rod. So far, a large variety of hydrogen contents has been covered in the CIRFT testing on HBR rods. It has been shown that the load amplitude is the dominant factor that controls the lifetime of bending rods, but the hydrogen content also has an important effect on the lifetime attained, according to the load range tested.

fuel vibration integrity↗

Two-dimensional heterostructures: fabrication, characterization, and application

Two-dimensional (2D) materials such as graphene, hexagonal boron nitrides (hBN), and transition metal dichalcogenides (TMDs, e.g., MoS 2 ) have attracted considerable attention in the past few years because of their novel properties and versatile potential applications. These 2D layers can be integrated into a monolayer (lateral 2D heterostructure) or a multilayer stack (vertical 2D heterostructure). The resulting artificial 2D structures provide access to new properties and applications beyond their component 2D atomic crystals and hence, they are emerging as a new exciting field of research. Lastly, in this article, we review recent progress on the fabrication, characterization, and applications of various 2D heterostructures.

36 MATERIALS SCIENCE↗

Using Finite Model Analysis and Out of Hot Cell Surrogate Rod Testing to Analyze High Burnup Used Nuclear Fuel Mechanical Properties

Based on a series of FEA simulations, the discussions and the conclusions concerning the impact of the interface bonding efficiency to SNF vibration integrity are provided in this report; this includes the moment carrying capacity distribution between pellets and clad, and the impact of cohesion bonding on the flexural rigidity of the surrogate rod system. As progressive de-bonding occurs at the pellet-pellet interfaces and at the pellet-clad interface, the load ratio of the bending moment carrying capacity gradually shifts from the pellets to the clad; the clad starts to carry a significant portion of the bending moment resistance until reaching the full de-bonding state at the pellet-pellet interface regions. This results in localized plastic deformation of the clad at the pellet-pellet-clad interface region; the associated plastic deformations of SS clad leads to a significant degradation in the stiffness of the surrogate rod. For instance, the flexural rigidity was reduced by 39% from the perfect bond state to the de-bonded state at the pellet-pellet interfaces.

fuel-pellet interface↗

The Development of Reversible Bending Fatigue Tester and Its Application to High Burnup Spent Nuclear Fuel Vibration Integrity Investigation under Normal Transportation

For high burn-up spent nuclear fuel (SNF), it is expected that the spent fuel cladding will have a high population of microcracks and hydrides, including macro-hydrides and micro-hydrides. This will reduce the stress intensity required to advance the crack growth. The linking of these microcracks during vibration loading also reduces the fatigue threshold/incubation period significantly, accelerating fatigue failure. In addition to the damages in cladding, the microstructure of comprising fuel pellets and interfaces of fuel rod have changed dramatically after the high burn-up process. These modifications have a direct impact on the structural integrity and vibration response of SNF rods in transportation.

Fuel Transport↗

Band alignment between GaN and ZrO{sub 2} formed by atomic layer deposition

The band alignment between Ga-face GaN and atomic-layer-deposited ZrO{sub 2} was investigated using X-ray photoelectron spectroscopy (XPS). The dependence of Ga 3d and Zr 3d core-level positions on the take-off angles indicated upward band bending at GaN surface and potential gradient in ZrO{sub 2} layer. Based on angle-resolved XPS measurements combined with numerical calculations, valence band discontinuity ΔE{sub V} of 1 ± 0.2 eV and conduction band discontinuity ΔE{sub C} of 1.2 ± 0.2 eV at ZrO{sub 2}/GaN interface were determined by taking GaN surface band bending and potential gradient in ZrO{sub 2} layer into account.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Low frequency noise in the unstable contact region of Au-to-Au microcontact for microelectromechanical system switches

The noise behavior of Au-to-Au microcontact for microelectromechanical system switches has been experimentally studied in the unstable contact region. The results suggest that the electrical conduction remains nonmetallic at the initial stage during contact formation due to the existence of alien films, and traps in the alien layer located at the contact interface could play an important role in determining the conduction noise. The conduction fluctuation induced by electron trapping-detrapping associated with the hydrocarbon layer is found to be an intrinsic noise source contributing to the low frequency noise in the unstable contact region.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Bandgap properties of diamond structure photonic crystal heterostructures with inclined and curved interfaces

The 3D (dimensional) diamond structure photonic crystal heterostructures with different lattice constants were prepared using rapid prototyping and gel casting with alumina. In this paper, heterostructures with inclined and curved interfaces were designed and its bandgap properties were studied. The normalized resonant intensity of electromagnetic wave in heterostructure with inclined and curved interface is stronger than that in the ordinary heterostructure without modified interface. The influence of curved interface on transmission properties of electromagnetic wave was investigated with the radius of curvature ranging from 17 mm to 37 mm at 5 mm interval. The results show that two resonant modes appear in the photonic band gap, being similar to the band gap characteristics of the photonic crystals with two defects inside. With the increasing of the radius of curvature, the resonant mode shift to higher frequency. In the structure with a radius of curvature of 32 mm, a guiding band appears in the photonic band gap. Further increase in the radius of curvature, the guiding band will split into two resonant modes again and the two resonant modes shift to lower frequencies.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Investigations of Ba{sub 3}BP{sub 3}O{sub 12}:Eu{sup 2+} single crystal as a scintillator

Highlights: • Eu{sup 2+}-activated Ba{sub 3}BP{sub 3}O{sub 12} single crystals have been grown by the top-seeded solution growth method (TSSG) for the first time. • Ba{sub 3}BP{sub 3}O{sub 12}:Eu{sup 2+} single crystal exhibits wide transparency in the wavelength range from 250 to 700 nm. • Ba{sub 3}BP{sub 3}O{sub 12}:Eu{sup 2+} single crystal shows high overall scintillation efficiency (1.8 times of BGO) and moderate decay time (860 ns). - Abstract: Single crystals of Ba{sub 3}BP{sub 3}O{sub 12}:Eu{sup 2+} with high optical quality have been grown by the top-seeded solution growth (TSSG) method using BPO{sub 4}–NaF mixture as the flux. Ba{sub 3}BP{sub 3}O{sub 12}:Eu{sup 2+} single crystal exhibits wide transparency in the wavelength range from 250 to 700 nm, and shows a broad emission band in the wavelength range of 350–650 nm when excited by X-ray radiation. The overall scintillation efficiency is about 1.8 times of that of BGO crystal under the same conditions. Its room temperature fluorescence decay curve exhibits a single-exponent shape with decay time of about 860 ns. It is worth noting that Ba{sub 3}BP{sub 3}O{sub 12}:Eu{sup 2+} single crystal may be of great interest for applications in the field of scintillation materials considering its scintillation properties, as well as the good chemical stability.

36 MATERIALS SCIENCE↗

2014 Semi-Annual Progress Letter Report on Used Nuclear Fuel Integrity Study in Transportation Environments

The objective of this project is to perform a systematic study on UNF (Used Nuclear Fuel) integrity under simulated transportation environments by using enabling hot-cell testing technology developed recently at ORNL, CIRFT (Cyclic Integrated Reversible-Bending Fatigue Tester) [1-9]. Out-of-cell study will support the ongoing ORNL hot-cell or in-cell testing. Although the use of CIRFT on H. B. Robinson UNF rods generated many interesting data, a number of important issues remain to be addressed arising from the test system and the rod itself. It has been shown that a direct examination of some of these issues in the hot-cell is prohibitive due to high cost and access limitations. The out-of-cell study has been demonstrated to be cost effective and much more feasible to provide quick turn-around solutions. A testing system with the same configuration as that of CIRFT used in hot-cell has been proposed to study the emerging issues from hot-cell testing and also to investigate the fatigue and failure mechanisms of UNF rods that cannot be identified directly with in hot-cell testing. The developments of hardware and software, test protocol, and hot-cell data analysis will be discussed in this report.

Normal Transportation↗

Actuating dielectric elastomers in pure shear deformation by elastomeric conductors

Pure shear experiments are commonly used to characterize dielectric elastomer (DE) material properties and to evaluate DE actuator/generator performance. It is increasingly important for many applications to replace conventional carbon grease electrodes with stretchable elastomeric conductors. We formulate a theory for DE with elastomeric conductors, synthesize transparent hydrogel as ionic conductors, and measure actuation of DE in pure shear deformation. Maximum 67% actuation strain is demonstrated. The theory agrees well with our measurement and also correlates well with reported experiments on DE with electronic conductors.

36 MATERIALS SCIENCE↗

Bidirectional regulation of bakuchiol, an estrogenic-like compound, on catecholamine secretion

Excess or deficiency of catecholamine (CA) secretion was related with several diseases. Recently, estrogen and phytoestrogens were reported to regulate the activity of CA system. Bakuchiol is a phytoestrogen isolated from the seeds of Psoralea corylifolia L. (Leguminosae) which has been used in Traditional Chinese medicine as a tonic or aphrodisiac. In the present study, bovine adrenal medullary cells were employed to investigate the effects and mechanisms of bakuchiol on the regulation of CA secretion. Further, its anti-depressant like and anti-stress effects were evaluated by using behavioral despair and chronic immobilization stress models. Our results indicated that bakuchiol showed bidirectional regulation on CA secretion. It stimulated basal CA secretion in a concentration dependent manner (p < 0.01), while it reduced 300 μM acetylcholine (ACh) (p < 0.01), 100 μM veratridine (Ver) (p < 0.01) and 56 mM K{sup +} (p < 0.05) induced CA secretion, respectively. We also found that the stimulation of basal CA secretion by bakuchiol may act through estrogen-like effect and the JNK pathway in an extra-cellular calcium independent manner. Further, bakuchiol elevated tyrosine hydroxylase Ser40 and Ser31 phosphorylation (p < 0.01) through the PKA and ERK1/2 pathways, respectively. Bakuchiol inhibited ACh, Ver and 56 mM K{sup +} induced CA secretion was related with reduction of intracellular calcium rise. In vivo experiments, we found that bakuchiol significantly reduced immobilization time in behavioral despair mouse (p < 0.05 or 0.01), and plasma epinephrine (E) and norepinephrine (NE) levels in chronic immobilization stress (p < 0.05). Overall, these results present a bidirectional regulation of bakuchiol on CA secretion which indicated that bakuchiol may exert anti-stress and the potential anti-depressant-like effects. - Highlights: • Bakuchiol stimulated basal catecholamine secretion. • Bakuchiol inhibited various secretagogues induced catecholamine secretion. • Bakuchiol may have anti-stress and the potential anti-depression-like effects.

60 APPLIED LIFE SCIENCES↗