Linking far-from-equilibrium defect structures in ceramics to electromagnetic driving forces
Explore the source record for details and available documents.
99 GENERAL AND MISCELLANEOUS↗
Engineering topics
Wang, H.
Publications and source records attributed to Wang, H..
Enhanced Ability of Plant-Derived PGT121 Glycovariants To Eliminate HIV-1-Infected Cells
Explore the source record for details and available documents.
99 GENERAL AND MISCELLANEOUS↗
Interfacial Active Sites for CO2 Assisted Selective Cleavage of C-C/C-H Bonds in Ethane
Explore the source record for details and available documents.
99 GENERAL AND MISCELLANEOUS↗
Controlling the size of non-axisymmetric magnetic footprints using resonant magnetic perturbations
The structure of the non-axisymmetric heat load distribution at the divertor plates is determined not only by the toroidal but also from the poloidal spectrum of non-axisymmetric field perturbations. Whether they are intrinsic, like error fields, or they are applied through 3D coils, the non-axisymmetric fields produce complex 3D edge magnetic topologies (footprints) that alter the properties of the heat and particle flux distributions on the divertor target plates. In this manuscript, a study of the impact of applied 3D field poloidal spectrum on the footprint size and structure is done for the DIII-D tokamak using the resistive MHD code M3D-C1 coupled with the field line tracing code TRIP3D. To resolve the impact of the poloidal spectrum of the magnetic perturbation, the relative phase of the two rows of in-vessel 3D coils used to produce both a n = 2 and a n = 3 perturbation is varied, where n is the toroidal harmonic of the magnetic perturbation. This shows that the largest footprint is predicted when the relative phase of the two rows is close to zero, which is also where the resonant coupling with the plasma is maximized. These results suggest that it will be challenging to decouple the footprint size from the requisite resonant coupling for RMP–ELM control. The correlation between the measured heat load and particle flux distributions at the outer divertor plates in DIII-D and the magnetic measurements is in good agreement with the predicted dependence of the magnetic footprint size on the amplitude of the resonant component of the plasma response.
3D fields↗
Comparative evaluation of analogue front-end designs for the CMS Inner Tracker at the High Luminosity LHC
The CMS Inner Tracker, made of silicon pixel modules, will be entirely replaced prior to the start of the High Luminosity LHC period. One of the crucial components of the new Inner Tracker system is the readout chip, being developed by the RD53 Collaboration, and in particular its analogue front-end, which receives the signal from the sensor and digitizes it. Three different analogue front-ends (Synchronous, Linear, and Differential) were designed and implemented in the RD53A demonstrator chip. A dedicated evaluation program was carried out to select the most suitable design to build a radiation tolerant pixel detector able to sustain high particle rates with high efficiency and a small fraction of spurious pixel hits. The test results showed that all three analogue front-ends presented strong points, but also limitations. The Differential front-end demonstrated very low noise, but the threshold tuning became problematic after irradiation. Moreover, a saturation in the preamplifier feedback loop affected the return of the signal to baseline and thus increased the dead time. The Synchronous front-end showed very good timing performance, but also higher noise. For the Linear front-end all of the parameters were within specification, although this design had the largest time walk. This limitation was addressed and mitigated in an improved design. The analysis of the advantages and disadvantages of the three front-ends in the context of the CMS Inner Tracker operation requirements led to the selection of the improved design Linear front-end for integration in the final CMS readout chip.
46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
Development of an integrated core–edge scenario using the super H-mode
An optimized pedestal regime called the super-H (SH) mode is leveraged to couple a fusion relevant core plasma with a high density scrape-off layer appropriate for realistic reactor power exhaust solutions. Recent DIII-D experiments have expanded the operating space of the SH regime using advanced control algorithms and investigated optimization of impurity seeding, deuterium gas puffing, and 3D magnetic perturbations. Simultaneous real-time control of the pedestal density and radiated power with in-vessel coils and nitrogen seeding enable optimal coupled divertor and pedestal conditions. Four case studies are analysed with varied levels of radiated power in the divertor volume ranging from 0 (no seeding) to 8.5 MW radiated from carbon and nitrogen emission. Plasmas with a 4.5 MW radiated power target establish a radiative mantle, leading to divertor temperatures of ~16 eV while maintaining SH-mode, and with only marginal impact on the pedestal and core performance. Increased levels of N 2 seeding with a 7.5 MW radiated power target facilitate detachment onset and divertor temperatures <5 eV, with no degradation in stored energy and the operational point remaining inside the SH-mode channel for $ > 2.5{\tau }_{\text{E}}$. Finally, a 8.5 MW radiated power target leads to partial detachment, which is so far associated with the loss of access to SH-mode pedestal conditions.
70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
Selection of the silicon sensor thickness for the Phase-2 upgrade of the CMS Outer Tracker
During the operation of the CMS experiment at the High-Luminosity LHC the silicon sensors of the Phase-2 Outer Tracker will be exposed to radiation levels that could potentially deteriorate their performance. Previous studies had determined that planar float zone silicon with n-doped strips on a p-doped substrate was preferred over p-doped strips on an n-doped substrate. The last step in evaluating the optimal design for the mass production of about 200 m$^{2}$ of silicon sensors was to compare sensors of baseline thickness (about 300 μm) to thinned sensors (about 240 μm), which promised several benefits at high radiation levels because of the higher electric fields at the same bias voltage. This study provides a direct comparison of these two thicknesses in terms of sensor characteristics as well as charge collection and hit efficiency for fluences up to 1.5 × 10$^{15}$ n$_{eq}$/cm$^{2}$. The measurement results demonstrate that sensors with about 300 μm thickness will ensure excellent tracking performance even at the highest considered fluence levels expected for the Phase-2 Outer Tracker.
46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
Characterization of the scintillation time response of liquid argon detectors for dark matter search
The scintillation time response of liquid argon has a key role in the discrimination of electronic backgrounds in dark matter search experiments. However, its extraordinary rejection power can be affected by various detector effects such as the delayed light emission of TetraPhenyl Butadiene, the most commonly used wavelength shifter, and the electric drift field applied in Time Projection Chambers. Herein, we characterized the TetraPhenyl Butadiene delayed response and the dependence of the pulse shape discrimination on the electric field, exploiting the data acquired with the ARIS, a small-scale single-phase liquid argon detector exposed to monochromatic neutron and gamma sources at the ALTO facility of IJC Lab in Orsay.
47 OTHER INSTRUMENTATION↗
Investigation of the ground-state spin inversion in the neutron-rich Cl 47 , 49 isotopes
A first γ -ray study of Cl 47 , 49 spectroscopy was performed at the Radioactive Isotope Beam Factory with Ar 50 projectiles at 217 MeV/nucleon, impinging on the liquid hydrogen target of the MINOS device. Prompt deexcitation γ rays were measured with the NaI(Tl) array DALI2 + . Through the one-proton knockout reaction Ar 50 ( p , 2 p ) , a spin assignment could be determined for the low-lying states of Cl 49 from the momentum distribution obtained with the SAMURAI spectrometer. A spin-parity J π = 3 / 2 + is deduced for the ground state of Cl 49 , similar to the recently studied N = 32 isotope K 51 . The evolution of the energy difference E ( 1 / 2 1 + ) - E ( 3 / 2 1 + ) is compared to state-of-the-art theoretical predictions.
73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
Numerical assessment of the new V-shape small-angle slot divertor on DIII-D
The small-angle slot (SAS) divertor of the DIII-D tokamak, and its upcoming upgrade, the V-shape small-angle slot (SAS-V) divertor, are numerically investigated using the SOLPS-ITER code package, including the effect of particle drifts, for a range of plasma density, heating power, strike point position in the slot, and for both magnetic field directions. The simulations show that the electron temperature near the strike point is reduced in SAS-V compared to SAS, for both magnetic field directions, such that SAS-V achieves divertor detachment at a lower value of the outboard mid-plane separatrix electron density. The detachment threshold is lower because the V-shape focuses recycling neutrals on the V-end, densifying and cooling the plasma in the slot. At sufficiently high density, the V-shape also reduces the radial gradient of the temperature profile at the target, which in turns reduces the radial electric field and the E x B drift velocities, further densifying and cooling the plasma in the slot and leading to detachment. The V-shape effect, however, is reduced for higher heating power. With more heating power, the detachment density increases, reducing the ionization mean free path of recycled neutrals, which therefore become less sensitive to target shape changes. Furthermore, this suggests that in a fusion reactor, where the heating power is high, optimization of the divertor target shape needs to be combined with other strategies to lower the detachment density, such as in-slot injection of low-Z impurities.
70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
Radiative Forcing of Nitrate Aerosols From 1975 to 2010 as Simulated by MOSAIC Module in CESM2-MAM4
In this work, we incorporate the Model for Simulating Aerosol Interactions and Chemistry (MOSAIC) module in the Community Earth System Model version 2 (CESM2) Community Atmosphere Model Version 6 with interactive chemistry (CAM6-chem), and couple it with the four mode version of the Modal Aerosol Module (MAM4). The MOSAIC module is used to simulate the thermodynamics of the gas-aerosol mass exchange, with a special focus on simulating nitrate aerosol. By comparing against ground and satellite observations, we found that the MOSAIC/MAM4 scheme performs reasonably well in simulating spatiotemporal distributions of aerosols, including nitrate aerosol. We conducted a series of model experiments with and without nitrate aerosols, and examined the radiative effect (RE) associated with nitrate aerosols in 1975, 2000, and 2010, and accessed the radiative forcing (RF) of nitrate aerosols between the present day and pre-industrial periods. Comparing with the nitrate aerosol RE, we predicted relatively small RF of anthropogenic nitrate aerosol from aerosol-radiation interactions (RF ari : -0.014 W m -2 ) and large RF from aerosol-cloud interactions (RF aci : -0.219 W m -2 ). Regional signatures of nitrate RE/RF are noticeable and important: for instance, very small changes in RE ari in Europe and USA, but 2.8–3 times increases in RE ari in India and China from 1975 to 2010, while RE aci /RF aci in China is a warming effect due to the competing effect between sulfate and nitrate aerosols as cloud condensation nuclei.
54 ENVIRONMENTAL SCIENCES↗
Demonstration of Electron Cooling using a Pulsed Beam from an Electrostatic Electron Cooler
Electron cooling continues to be an invaluable technique to reduce and maintain the emittance in hadron storage rings in cases where stochastic cooling is inefficient and radiative cooling is negligible. Extending the energy range of electron coolers beyond what is feasible with the conventional, electrostatic approach necessitates the use of RF fields for acceleration and, thus, a bunched electron beam. To experimentally investigate how the relative time structure of the two beams affects the cooling properties, we have set up a pulsed-beam cooling device by adding a synchronized pulsing circuit to the conventional electron source of the CSRm cooler at Institute of Modern Physics *. We show the effect of the electron bunch length and longitudinal ion focusing strength on the temporal evolution of the longitudinal and transverse ion beam profile and demonstrate the detrimental effect of timing jitter as predicted by theory and simulations. Compared to actual RF-based coolers, the simplicity and flexibility of our setup will facilitate further investigations of specific aspects of bunched cooling such as synchro-betatron coupling and phase dithering.
Bruker, M. W.↗
Magnetron R&D for high efficiency CW RF sources for industrial accelerators
The scheme of using high-efficiency magnetrons to drive radiofrequency accelerators has been demonstrated at 2450 MHz in CW mode *. Magnetron test stands at JLab and GA have been set up to further test the noise figure and the locking speed of the injection phase-lock method. For higher power applications, power combining experiments using a TM010 cavity-type combiner and a magic tee for the binary combiner while using a single clean injection signal has been carried out at 2450 MHz. The frequency pulling effect between the magnetron and a low-Q cavity has been shown to enhance the frequency locking bandwidth compared to the injection phase-lock alone. The principle has been studied by the equivalent circuit simulation, analytical model, and finally confirmed experimentally on the magnetrons. Due to the pandemic delay in 2020, the equivalent high power tests using a 75kW, 915MHz industrial magnetron will be done in 2021 and will be reported in a future paper.
Wang, H.↗
RF Harmonic Kicker R&D Demonstration and Its Application to the RCS Injection of the EIC
The Rapid Cycling Synchrotron (RCS) of the Electron-Ion Collider (EIC) at Brookhaven National Laboratory (BNL) is an accelerating component of the electron injection complex, which provides polarized electrons in electron-ion collisions in the main Electron Storage Ring (ESR). We present the injection scheme into the RCS based on an ultra-fast harmonic kicker, whose "five odd-harmonic modes" prototype was developed in the context of the Jefferson Lab EIC (JLEIC) conceptual design. In its early stage of R&D, the sharp (~3 ns width) waveform construction, beam dynamics, and pulsed power operation with short ramping time (~10 us) will be discussed together with the fabrication work of the JLEIC prototype.
Park, G. -T.↗
The Relation Between Field Flatness and the Passband Frequency in the Elliptical Cavities
A technique that predicts the field flatness of the operating pi-mode based on the passband frequency is highly desirable when the direct measurement of the field is not available. Such a technique was developed for the SNS-PPU cavity, a 6-cell SRF cavity whose field flatness is important for cold operation. In this paper, we will present the theory on the relations between field profile and passband frequencies of the arbitrary deformed cavities, the simulation studies, and comparison with the experimental measurements.
Park, G. -T.↗
Multiscale Chirping Modes Driven by Thermal Ions in a Plasma with Reactor-Relevant Ion Temperature
A thermal ion driven bursting instability with rapid frequency chirping, considered as an Alfv´enic ion temperature gradient mode, has been observed in plasmas having reactor-relevant temperature in the DIII-D tokamak. The modes are excited over a wide spatial range from macroscopic device size to micro-turbulence size and the perturbation energy propagates across multiple spatial scales. The radial mode structure is able to expand from local to global in ~ 0.1 ms and it causes magnetic topology changes in the plasma edge, which can lead to a minor disruption event. Since the mode is typically observed in the high ion temperature ≳ 10 keV and high-! plasma regime, the manifestation of the mode in future reactors should be studied with development of mitigation strategies, if needed. In conclusion, this is the first observation of destabilization of the Alfv´en continuum caused by the compressibility of ions with reactor-relevant ion temperature.
70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
Spectroscopy of 33 Mg with knockout reactions
In this work, the structure of 33 Mg was investigated by means of two knockout reactions, one-neutron removal from 34 Mg and one-proton removal from 34 Al. Using comparative analysis of the population of observed excited states in the residual 33 Mg, the nature of these states can be deciphered. In addition, the long-standing controversy about the parity of the 33 Mg ground state is resolved using momentum distribution analysis, showing a clear signature for negative parity. Partial cross section measurements are compared with the results of eikonal reaction theory combined with large-scale shell model calculations of this complex nucleus located in the island of inversion, where configuration mixing plays a major role.
73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
PHYSICS-BASED AUTOMATED REASONING FOR HEALTH MONITORING: SENSOR SET SELECTION
This paper addresses the problem of how to select a sensor set for equipment health monitoring that meets the needs of advanced O&M tasks that target cost reduction. They include maintenance optimization and asset management for the existing fleet and near-autonomous operation as currently envisioned for advanced reactors. The method uses physics-based automated reasoning to provide for a more “explainable” diagnosis. The algorithm is described along with its implementation on a computational cluster. Preliminary results for application to a use case in the current fleet are described.
diagnosis↗