Pro v Con Reviews: Is Food Addictive? Obesity and addiction: neurobiological overlaps
N/A
Engineering topics
Publications and source records attributed to Wang, G..
N/A
N/A
An extensive set of tests comparing gyrokinetic predictions of temperature-gradient driven electron turbulence to power balance transport analyses and fluctuation measurements are presented. These tests use data from an L-mode validation study on the DIII-D tokamak (Luxon 2002 Nucl. Fusion 42 614) in which the local value of $a/L_{T_{\rm e} } =-(a/T_{\rm e} )({\rm d}T_{\rm e} /{\rm d}r)$ is varied by modulated electron cyclotron heating; the GYRO code (Candy and Waltz 2003 J. Comput. Phys. 186 545) is used to make the gyrokinetic predictions. Using a variety of novel measures, both local and global nonlinear simulations are shown to predict key characteristics of the electron energy flux Qe and long-wavelength (low-k) Te fluctuations, but systematically underpredict (by roughly a factor of two) the ion energy flux Qi. A new synthetic diagnostic for comparison to intermediate wavelength Doppler backscattering measurements is presented, and used to compare simulation predictions against experiment. In contrast to the agreement observed in the low-k Te fluctuation comparisons, little agreement is found between the predicted and measured intermediate-k density fluctuation responses. The results presented in this paper significantly expand upon those previously reported in DeBoo et al (2010 Phys. Plasmas 17 056105), comparing transport and multiple turbulence predictions from numerically converged local and global simulations for all four experimental heating configurations (instead of only fluxes and low-k Te fluctuations for one condition) to measurements and power balance analyses.
N/A
The first systematic investigation of core electron thermal transport and the role of local ion temperature gradient/trapped electron mode/electron temperature gradient (ITG/TEM/ETG)-scale core turbulence is performed in high temperature, low collisionality H-mode plasmas in the DIII-D tokamak. Wavenumber spectra of L-mode and H-mode density turbulence are measured by Doppler backscattering. H-mode wavenumber spectra are directly contrasted for the first time with nonlinear gyrokinetic simulation results. Core ITG/TEM-scale turbulence is substantially reduced/suppressed by E × B shear promptly after the L–H transition, resulting in reduced electron thermal transport across the entire minor radius. For small kθρs, both experiment and nonlinear gyrokinetic simulations using the GYRO code show density fluctuation levels increasing with kθρs in H-mode (r/a = 0.6), in contrast to ITG/TEM-dominated L-mode plasmas. GYRO simulations also indicate that a significant portion of the remaining H-mode electron heat flux results directly from residual intermediate/short-scale TEM/ETG turbulence. Electron transport at substantially increased electron-to-ion temperature ratio (Te/Ti ≥ 1, r/a ≤ 0.35) has been investigated in ECH-assisted, quiescent H-mode plasmas. A synergistic increase in core electron and ion thermal diffusivity (normalized to the gyro-Bohm diffusivity) is found with applied ECH. From linear stability analysis, the TEM mode is expected to become the dominant linear instability with ECH due to increased electron-to-ion temperature ratio and a reduction in the ion temperature gradient. This is consistent with increased electron temperature fluctuations and core electron thermal diffusivity observed experimentally. The reduced ion temperature gradient likely results from a reduction in the ITG critical gradient due to increased Te/Ti and reduced E × B shear. These studies are performed at collisonality ( \nu_{\rm e}^\ast \sim 0.05 , r/a ≤ 0.6) and address transport in electron heat-dominated regimes, thought to be important in ITER due to α-particle heating.
This report describes the asymptotic behavior of dispersion integrals.
A series of carefully designed experiments on DIII-D have taken advantage of a broad set of turbulence and profile diagnostics to rigorously test gyrokinetic turbulence simulations. In this paper the goals, tools and experiments performed in these validation studies are reviewed and specific examples presented. It is found that predictions of transport and fluctuation levels in the mid-core region (0.4 < ρ < 0.75) are in better agreement with experiment than those in the outer region (ρ ≥ 0.75) where edge coupling effects may become increasingly important and multiscale simulations may also be necessary. Validation studies such as these are crucial in developing confidence in a first-principles based predictive capability for ITER.
First principles calculations were performed on ZnSnO 3 polymorphs to understand their energetic stability and structural transition under high pressure environments. The experimentally-identified ilmenite (IL)-type and LiNbO 3 (LN)-type ZnSnO 3 may coexist at zero pressure considering the effect of zero point energy. IL-type ZnSnO 3 becomes unstable under high pressure due to the appearance of imaginary frequency in phonon spectra. Enthalpy differences suggest that the phase stability follows the sequence: ZnO+SnO 2 below 5.9 GPa, Zn 2 SnO 4 +SnO 2 up to 7.1 GPa, and LN-type phase above 7.1 GPa. Pressurization at 34.5 GPa causes a phase transformation from the LN-type to the orthorhombic CdSnO 3 -type. Thermodynamic properties including Helmholtz free energy, specific heat at constant volume and Debye temperature were also calculated.
Not Available
We solve linearized Vlasov-Maxwell FEL equations for a 3-D perturbation in the infinite electron beam with Lorentzian energy distributions using paraxial approximation. We present analytical solutions for various initial perturbations and discuss the effect of optical guiding in such system.
The linac beam diagnostics will be provided by Research Instruments (former ACCEL) as part of the linac package: • one removable Faraday cup after electron source, • five wall current monitors (WCM) located after electron source, bunching system and accelerating sections 1, 2, and 3, • six removable YAG:Ce screens including cameras, • five sets of buttons for beam position monitoring. BNL will provide receivers for the beam position monitors (BPMs).
The ITER low field side reflectometer faces some unique design challenges, among which are included the effect of relativistic electron temperatures and refraction of probing waves. This paper utilizes GENRAY, a 3- D ray tracing code, to investigate these effects. Using a simulated ITER operating scenario, characteristics of the reflected RF waves returning to the launch plane are quantified as a function of a range of design parameters, including antenna height, antenna size, and antenna radial position. Results for edge/SOL measurement with both O- and X-modes using proposed antennas are reported.
KEK has been investigating the use of pulsed multipoles for injection the Photon Factory and for KEKB. A pulsed quadrupole magnet was installed in the PF. It worked successfully with the exception that it caused beam envelope oscillations when pulsed. They have subsequently designed a pulsed sextupole for injection. The goal would be to have a null field for the stored beam with no gradient and still have an off axis field for the injected beam. In this document we look at the possibility of using a pulsed sextupole in the NSLS-II Storage Ring for injection.
We report results from the Cryogenic Dark Matter Search at the Soudan Underground Laboratory (CDMS II) featuring the full complement of 30 detectors. A blind analysis of data taken between October 2006 and July 2007 sets an upper limit on the weakly interacting massive particle (WIMP) nucleon spin-independent cross section of 6.6x10{sup -44} cm{sup 2} (4.6x10{sup -44} cm{sup 2} when combined with previous CDMS II data) at the 90% confidence level for a WIMP mass of 60 GeV/c{sup 2}. This achieves the best sensitivity for dark matter WIMPs with masses above 44 GeV/c{sup 2}, and significantly restricts the parameter space for some favored supersymmetric models.
We describe the development of antenna coupled bolometers for CMB polarization experiments. The necessary components of a bolometric CMB polarimeter - a beam forming element, a band defining filter, and detectors - are all fabricated on a silicon chip with photolithography.
SPIDER is a proposed balloon-borne experiment designated to search for the imprints of gravity waves on the polarization of the cosmic microwave background radiation (CMB).
An experimental study of the behavior and structure of a liquid spray immersed in a strong swirling field is reported. In order to simulate some of the aerodynamic conditions experienced by a spray in a model combustor, an experimental setup using an acrylic chamber, a vane-type swirler, and separate air supplies for both the secondary air and swirl air were integrated to perform the experiments in the wind tunnel. The effect of the swirling flow on the original spray cone is to widen it substantially, and to provide a vortex core where intense mixing results in large changes in particle size distribution and in particle number density. Outside the recirculation region, both the D32 and N sub d attain more uniform values. Inside the recirculation region, the mean axial velocity averaged over all the drop sizes has larger values than the mean air velocity. Outside the recirculation region, both the particles and the air exhibit virtually the same velocities. The turbulence measurements showed regions of high turbulence intensity in the boundaries of the recirculation region.