Engineering Papers⌕ Search

Engineering topics

Wang, Feng

Publications and source records attributed to Wang, Feng.

At least 163 records · Page 9

Identification of dopant site and its effect on electrochemical activity in Mn-doped lithium titanate

Doped metal oxide materials are commonly used for applications in energy storage and conversion, such as batteries and solid oxide fuel cells. The knowledge of the electronic properties of dopants and their local environment is essential for understanding the effects of doping on the electrochemical properties. Using a combination of x-ray absorption near-edge structure spectroscopy (XANES) experiment and theoretical modeling we demonstrate that in the dilute (1 at .%) Mn-doped lithium titanate (Li 4/3 Ti 5/3 O 4 , or LTO) the dopant Mn 2+ ions reside on tetrahedral (8a) sites. First-principles Mn K-edge XANES calculations revealed the spectral signature of the tetrahedrally coordinated Mn as a sharp peak in the middle of the absorption edge rise, caused by the 1s → 4 p transition, and it is important to include the effective electron-core hole Coulomb interaction in order to calculate the intenisty of this peak accurately. Finally, this dopant location can explain the impedance of Li migration through the LTO lattice during the charge-discharge process, and, as a result, the observed remarkable 20% decrease in electrochemical capacity of the 1% Mn-doped LTO compared to pristine LTO.

36 MATERIALS SCIENCE↗

Effects of Copper Content and Mold Temperature on the Hot Tearing Susceptibility of Mg-7Zn-xCu-0.6Zr Alloys

The effects of copper (Cu) content and mold temperature on the hot tearing susceptibility (HTS) of Mg-7Zn-xCu-0.6Zr (x = 0, 1, 2) alloys were investigated experimentally using a T-type hot tearing mold. The crack volumes were measured by paraffin permeation method, and the solidification process was analyzed by thermal analysis and by using the Clyne and Davies model. The microstructure and morphology of the crack zone of Mg-7Zn-xCu-0.6Zr alloys were characterized by scanning electron microscopy, and the composition of alloys was analyzed by X-ray diffraction. The results showed the formation of a new phase of MgZnCu in the alloys with Cu addition. Moreover, addition of Cu also led to the refinement of microstructures of Mg-7Zn-xCu-0.6Zr alloys. The HTS of Mg-7Zn-xCu-0.6Zr alloys decreased with the increase in both the content of Cu and the mold temperature.

36 MATERIALS SCIENCE↗

Long noncoding RNA MAGI2-AS3 regulates CCDC19 expression by sponging miR-15b-5p and suppresses bladder cancer progression

Highlights: • Expression of MAGI2-AS3, miR-15b-5p and CCDC19 in BCa. • MAGI2-AS3 regulates miR-15b-5p/CCDC19 cascade expression in BCa. • CCDC19 knockdown partly reverses the effects caused by MAGI2-AS3 overexpression in vitro. • MAGI2-AS3 suppresses BCa growth in vivo. Bladder cancer (BCa) belongs to a popular urological malignancy and leads to large numbers of deaths worldwide. Recently, emerging evidences indicate that long noncoding RNAs (lncRNAs) are closely related with BC occurrence and progression. However, the function of lncRNA MAGI2-AS3 remains poorly understood in BC. In this present study, we screened out a novel lncRNA MAGI2-AS3 whose expression was downregulated in BCa tissues. We showed that MAGI2-AS3 downregulation in BCa patients indicated a poor prognosis. Functionally, we showed that MAGI2-AS3 overexpression inhibits proliferation, migration and invasion of BCa cells. Moreover, ectopic expression of MAGI2-AS3 suppresses BCa growth in vivo. Bioinformatics analysis revealed that MAGI2-AS3 could serve as a competing endogenous RNA (ceRNA) for miR-15b-5p. In the meantime, miR-15b-5p directly targeted CCDC19, a tumor suppressor in BCa. Rescue assays demonstrated that knockdown of CCDC19 restored the proliferation, migration and invasion of BCa cells suppressed by MAGI2-AS3 overexpression. In conclusion, this study identified a novel mechanism that MAGI2-AS3/miR-15b-5p/CCDC19 signaling pathway regulates BCa progression.

60 APPLIED LIFE SCIENCES↗

Hybrid simulations of fishbone instabilities and Alfvén eigenmodes in DIII-D tokamak

In DIII-D hybrid discharges, the intense Alfvén eigenmode (AE) activity driven by Neutral Beam Injection (NBI) that is typically observed can be suppressed and replaced by fishbone modes when Electron Cyclotron Current Drive (ECCD) is centrally applied. Simulations have been carried out with the kinetic/magnetohydrodynamic (MHD) hybrid code M3D-K based on DIII-D discharges #161401 and #161403 without and with ECCD, respectively. In both cases unstable modes are found – the mode frequency and mode structure indicate the instability excited in #161403 is of fishbone type, while that in #161401 is identified as the beta-induced Alfvén eigenmode (BAE)-like mode. Moreover, we find that the calculated mode frequencies of these two shots are consistent with experimental observations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Insights into Li/Ni ordering and surface reconstruction during synthesis of Ni-rich layered oxides

Nickel-rich layered transition metal oxides (NMCs) have been intensively studied as promising cathode candidates for next-generation Li-ion batteries, known for low cost and high theoretical capacity. However, the practical capacity of NMCs is largely determined by cationic ordering and has yet to be well controlled during synthesis, largely due to the complexity and non-equilibrium nature of the reactions occurring in the sintering process. In this work, high-energy synchrotron X-ray diffraction is employed to investigate the kinetic and thermodynamic aspects of cationic ordering during synthesis of LiNi 0.7 Mn 0.15 Co 0.15 O 2 (NMC71515). It is found that cationic ordering in the bulk is coupled to surface reconstruction during synthesis, occurring concomitantly and both being greatly affected by Li 2 CO 3 decomposition and Li loss at the particle surface. Through tuning the sintering temperature and time, highly ordered NMC71515 with high capacity and excellent rate capability is synthesized. The developed approach may be applied broadly to the synthesis of high-performance Ni-rich NMC and other cathode materials.

25 ENERGY STORAGE↗

Revisiting Conversion Reaction Mechanisms in Lithium Batteries: Lithiation-Driven Topotactic Transformation in FeF 2

Intercalation-type electrodes have now been commonly employed in today’s batteries as such materials are capable of storing and releasing lithium reversibly via topotactic transformation, conducive to small structural change, but they have limited interstitial sites to hold Li. In contrast, conversion electrodes feature high Li-storage capacity, but often undergo large structural change during (de)lithiation, resulting in cycling instability. One exception is iron fluoride (FeF 2 ), a conversion-type cathode that exhibits both high capacity and high cycling stability. Herein, we report a lithiation-driven topotactic transformation in a single crystal of FeF2, unveiled by in situ visualization of the spatial and crystallographic correlation between the parent and converted phases. Specifically, conversion in FeF 2 resembles the intercalation process but involves transport of both Li + and Fe 2+ ions within the F-anion array, leading to formation of Fe preferentially along specific crystallographic orientations of FeF 2 . Throughout the process, the F-anion framework is retained, creating a checkerboard-like structure, within which the volume change is largely compensated, thereby enabling the high cyclability in FeF 2 . Lastly, findings from this study, with unique insights into conversion reaction mechanisms, may help to pave the way for designing conversion-type electrodes for the next-generation high energy lithium batteries.

25 ENERGY STORAGE↗

Structure of the 4-1BB/4-1BBL complex and distinct binding and functional properties of utomilumab and urelumab

4-1BB (CD137, TNFRSF9) is an inducible costimulatory receptor expressed on activated T cells. Clinical trials of two agonist antibodies, utomilumab (PF-05082566) and urelumab (BMS-663513), are ongoing in multiple cancer indications, and both antibodies demonstrate distinct activities in the clinic. To understand these differences, we solved structures of the human 4-1BB/4-1BBL complex, the 4-1BBL trimer alone, and 4-1BB bound to utomilumab or urelumab. The 4-1BB/4-1BBL complex displays a unique interaction between receptor and ligand when compared with other TNF family members. Furthermore, our ligand-only structure differs from previously published data. Utomilumab, a ligand-blocking antibody, binds 4-1BB between CRDs 3 and 4. In contrast, urelumab binds 4-1BB CRD-1, away from the ligand binding site. Finally, cell-based assays demonstrate utomilumab is a milder agonist than urelumab. Collectively, our data provide a deeper understanding of the 4-1BB signaling complex, providing a template for future development of next generation 4-1BB targeted biologics.

Science & Technology - Other Topics↗

Ultrafast dynamics in van der Waals heterostructures

Van der Waals heterostructures are synthetic quantum materials composed of stacks of atomically thin two-dimensional (2D) layers. Because the electrons in the atomically thin 2D layers are exposed to layer-to-layer coupling, the properties of van der Waals heterostructures are defined not only by the constituent monolayers, but also by the interactions between the layers. Many fascinating electrical, optical and magnetic properties have recently been reported in different types of van der Waals heterostructures. In this Review, we focus on unique excited-state dynamics in transition metal dichalcogenide (TMDC) heterostructures. TMDC monolayers are the most widely studied 2D semiconductors, featuring prominent exciton states and accessibility to the valley degree of freedom. Many TMDC heterostructures are characterized by a staggered band alignment. This band alignment has profound effects on the evolution of the excited states in heterostructures, including ultrafast charge transfer between the layers, the formation of interlayer excitons, and the existence of long-lived spin and valley polarization in resident carriers. Furthermore we review recent experimental and theoretical efforts to elucidate electron dynamics in TMDC heterostructures, extending from timescales of femtoseconds to microseconds, and comment on the relevance of these effects for potential applications in optoelectronic, valleytronic and spintronic devices.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

CPU Isosurface Ray Tracing of Adaptive Mesh Refinement Data

Adaptive mesh refinement (AMR) is a key technology for large-scale simulations that allows for adaptively changing the simulation mesh resolution, resulting in significant computational and storage savings. However, visualizing such AMR data poses a significant challenge due to the difficulties introduced by the hierarchical representation when reconstructing continuous field values. Here, we detail a comprehensive solution for interactive isosurface rendering of block-structured AMR data. We contribute a novel reconstruction strategy—the octant method—which is continuous, adaptive and simple to implement. Furthermore, we present a generally applicable hybrid implicit isosurface ray-tracing method, which provides better rendering quality and performance than the built-in sampling-based approach in OSPRay. Finally, we integrate our octant method and hybrid isosurface geometry into OSPRay as a module, providing the ability to create high-quality interactive visualizations combining volume and isosurface representations of BS-AMR data. Lastly, we evaluate the rendering performance, memory consumption and quality of our method on two gigascale block-structured AMR datasets.

97 MATHEMATICS AND COMPUTING↗

ZKSCAN3 promotes breast cancer cell proliferation, migration and invasion

Highlights: • ZKSCAN3 is upregulated in breast cancer tissue and cell lines. • Knocking down ZKSCAN3 suppresses breast cancer cell proliferation, enhances cell apoptosis and blocks cell cycle. • Knocking down ZKSCAN3 significantly inhibits breast cancer cell migration and invasion. • Knocking down ZKSCAN3 significantly inhibits breast tumor growth in vivo. • Knocking down ZKSCAN3 reduces activity of the Akt/mTOR pathway. ZKSCAN3, a zinc-finger transcription factor, which has been shown to be upregulated in several human cancer. However, the expression level, function and mechanism of ZKSCAN3 in breast cancer remains unknown. In the current study, immunohistochemistry, western blot and quantitative real time polymerase chain reaction (qRT-PCR) results showed that ZKSCAN3 was overexpressed in breast cancer tissue compared with normal breast tissue. Through analyzing the clinicopathological characteristics, we demonstrated that positive ZKSCAN3 expression predicted poor prognosis of patients with breast cancer. The expression level of ZKSCAN3 protein/mRNA in breast cancer cells (MCF-7 and MDA-MB-231) was higher than its expression in normal breast cells (HBL-100). Knocking down ZKSCAN3 via its short hairpin RNA (shRNA) in MCF-7 and MDA-MB-231 inhibited cell viability, migration and invasion. Western blot analysis showed that ZKSCAN3 silencing lead to significant decreases in the expression of Cyclin D1, B-cell lymphoma-2 (Bcl-2), and matrix metalloproteinase (MMP)-2/MMP-9, as well as increases in the expression of Bcl2 Associated X Protein (Bax) in breast cancer cells. Additionally, ZKSCAN3-shRNA expression markedly suppressed tumor growth in breast cancer xenograft mice. Finally, we demonstrated that silencing of ZKSCAN3 was able to inhibit Akt/mTOR signaling pathway by blocking p-Akt and p-mTOR protein expression in breast cancer cells. These results demonstrate that ZKSCAN3 plays a significant role in the progression of breast cancer. Therefore, ZKSCAN3 is a potential therapeutic target for breast cancer.

60 APPLIED LIFE SCIENCES↗

LncRNA CALML3-AS1 promotes tumorigenesis of bladder cancer via regulating ZBTB2 by suppression of microRNA-4316

An increasing number of studies have elucidated the essential roles of long noncoding RNAs (lncRNAs) in tumor development. LncRNAs are also closely associated with bladder cancer (BCa) progression. In the present study, we screened out a novel lncRNA CALML3-AS1 with increased expression value in BCa tissues. Particularly, we showed that CALML3-AS1 overexpression correlates with advanced staging and an unsatisfactory prognosis. Functional experiments illustrated that CALML3-AS1 knockdown suppressed BCa cell proliferation, arrested cell-cycle progression and impaired migration and invasion while promoting apoptosis. Mechanistic investigation revealed that CALML3-AS1 directly interacts with miR-4316 and inhibits its availability in BCa cells, leading to elevated expression of ZBTB2. Consequently, ZBTB2 promotes BCa tumorigenesis through repressing p21 and facilitating PDK4 transcription. In conclusion, our findings demonstrate a novel CALML3-AS1-mediated process involved in BCa progression and indicate it might be a promising therapeutic target.

60 APPLIED LIFE SCIENCES↗

Cationic Ordering Coupled to Reconstruction of Basic Building Units during Synthesis of High-Ni Layered Oxides

Metal (M) oxides are one of the most interesting and widely used solids, and many of their properties can be directly correlated to the local structural ordering within basic building units (BBUs). One particular example is the high-Ni transition metal layered oxides, potential cathode materials for Li-ion batteries whose electrochemical activity is largely determined by the cationic ordering in octahedra (e.g., the BBUs in such systems). Yet to be firmly established is how the BBUs are inherited from precursors and subsequently evolve into the desired ordering during synthesis. A multimodal in situ X-ray characterization approach is employed to investigate the synthesis process in preparing LiNi 0.77 Mn 0.13 Co 0.10 O 2 from its hydroxide counterpart, at scales varying from the long-range to local individual octahedral units. Real-time observation corroborated by first-principles calculations reveals a topotactic transformation throughout the entire process, during which the layered framework is retained; however, due to preferential oxidation of Co and Mn over Ni, significant changes happen locally within NiO 6 octahedra. Specifically, oxygen loss and the associated symmetry breaking occur in NiO 6 ; as a consequence, Ni 2+ ions become highly mobile and tend to mix with Li, causing high cationic disordering upon formation of the layered oxides. Only through high-temperature heat treatment, Ni is further oxidized, thereby inducing symmetry reconstruction and, concomitantly, cationic ordering within NiO 6 octahedra. Finally, findings from this study shed light on designing high-Ni layered oxide cathodes and, more broadly, various functional materials through synthetic control of the constituent BBUs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Observation of topologically protected states at crystalline phase boundaries in single-layer WSe2

Abstract Transition metal dichalcogenide materials are unique in the wide variety of structural and electronic phases they exhibit in the two-dimensional limit. Here we show how such polymorphic flexibility can be used to achieve topological states at highly ordered phase boundaries in a new quantum spin Hall insulator (QSHI), 1 T ′-WSe 2 . We observe edge states at the crystallographically aligned interface between a quantum spin Hall insulating domain of 1 T ′-WSe 2 and a semiconducting domain of 1 H -WSe 2 in contiguous single layers. The QSHI nature of single-layer 1 T ′-WSe 2 is verified using angle-resolved photoemission spectroscopy to determine band inversion around a 120 meV energy gap, as well as scanning tunneling spectroscopy to directly image edge-state formation. Using this edge-state geometry we confirm the predicted penetration depth of one-dimensional interface states into the two-dimensional bulk of a QSHI for a well-specified crystallographic direction. These interfaces create opportunities for testing predictions of the microscopic behavior of topologically protected boundary states.

36 MATERIALS SCIENCE↗

Patterning-Induced Ferromagnetism of Fe 3 GeTe 2 van der Waals Materials beyond Room Temperature

Magnetic van der Waals (vdW) materials have emerged as promising candidates for spintronics applications, especially after the recent discovery of intrinsic ferromagnetism in monolayer vdW materials. There has been a critical need for tunable ferromagnetic vdW materials beyond room temperature. Here, we report a real-space imaging study of itinerant ferromagnet Fe 3 GeTe 2 and the enhancement of its Curie temperature well above ambient temperature. We find that the magnetic long-range order in Fe 3 GeTe 2 is characterized by an unconventional out-of-plane stripe-domain phase. In Fe 3 GeTe 2 microstructures patterned by a focused ion beam, the out-of-plane stripe domain phase undergoes a surprising transition at 230 K to an in-plane vortex phase that persists beyond room temperature. Finally, the discovery of tunable ferromagnetism in Fe 3 GeTe 2 materials opens up vast opportunities for utilizing vdW magnets in room-temperature spintronics devices.

36 MATERIALS SCIENCE↗

Correlation of Electron Tunneling and Plasmon Propagation in a Luttinger Liquid

Quantum-confined electrons in one dimension behave as a Luttinger liquid. However, unambiguous demonstration of Luttinger liquid phenomena in single-walled carbon nanotubes (SWNTs) has been challenging. In this work, we investigate well-defined SWNT cross junctions with a point contact between two Luttinger liquids and combine electrical transport and optical nanoscopy measurements to correlate completely different physical properties (i.e., the electron tunneling and the plasmon propagation) in the same Luttinger liquid system. Lastly, the suppressed electron tunneling at SWNT junctions exhibits a power-law scaling, which yields a Luttinger liquid interaction parameter that agrees quantitatively with that independently determined from the plasmon velocity based on the near-field optical nanoscopy.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ionic liquid-assisted synthesis of Yb3+-Tm3+ codoped Y7O6F9 petal shaped microcrystals with enhanced upconversion emission

Highlights: • Petal-like Yb{sup 3+}-Tm{sup 3+} codoped Y{sub 7}O{sub 6}F{sub 9} microparticles were achieved via fluorinated ionic liquids assisted-hydrothermal process. • Enhanced bright luminescence can be seen clearly with 980 nm laser diode at low excitation power (pump power 10 mW). • The fluorinated ionic liquid is used both as reaction medium and source of F{sup −} in the synthesis process. - Abstract: Petal-like Yb{sup 3+}-Tm{sup 3+} codoped Y{sub 7}O{sub 6}F{sub 9} microparticles were achieved via ionic liquid-assisted (IL) hydrothermal process. The emission efficiency of Y{sub 7}O{sub 6}F{sub 9}:Yb{sup 3+}/Tm{sup 3+} powders is much stronger than that of Y{sub 2}O{sub 3}:Yb{sup 3+}/Tm{sup 3+} sample. Under excitation at 980 nm with an unfocused laser beam under weak pump density of ∼0.1 W/cm{sup 2} (pump power 10 mW), the UC emission of the sample can been seen clearly. Four emission bands at 477, 540, 647 and 692 nm are observed and correspond to the {sup 1}G{sub 4} state to {sup 3}H{sub 6} state, {sup 1}D{sub 2} state to {sup 3}H{sub 5} state, {sup 1}G{sub 4} sate to {sup 3}F{sub 4} state, and {sup 3}F{sub 3} state to {sup 3}H{sub 6} state transition of Tm{sup 3+} ions. The enhanced UC emission is related to high crystallinity and lower effective phonon energy of oxyfluorides. The ionic liquid (IL) of [BMIM][BF{sub 4}] is used both as the reaction medium and the source of F{sup −}.

36 MATERIALS SCIENCE↗