Engineering Papers⌕ Search

Engineering topics

Wang, Feng

Publications and source records attributed to Wang, Feng.

At least 127 records · Page 7

Tunable correlated Chern insulator and ferromagnetism in a moiré superlattice

Studies of two-dimensional electron systems in a strong magnetic field revealed the quantum Hall effect, a topological state of matter featuring a finite Chern number C and chiral edge states. Haldane later theorized that Chern insulators with integer quantum Hall effects could appear in lattice models with complex hopping parameters even at zero magnetic field. The ABC-trilayer graphene/hexagonal boron nitride (ABC-TLG/hBN) moiré superlattice provides an attractive platform with which to explore Chern insulators because it features nearly flat moiré minibands with a valley-dependent, electrically tunable Chern number. In this work, we report the experimental observation of a correlated Chern insulator in an ABC-TLG/hBN moiré superlattice. We show that reversing the direction of the applied vertical electric field switches the moiré minibands of ABC-TLG/hBN between zero and finite Chern numbers, as revealed by large changes in magneto-transport behaviour. For topological hole minibands tuned to have a finite Chern number, we focus on quarter filling, corresponding to one hole per moiré unit cell. The Hall resistance is well quantized at h/2e 2 (where h is Planck’s constant and e is the charge on the electron), which implies C = 2, for a magnetic field exceeding 0.4 tesla. The correlated Chern insulator is ferromagnetic, exhibiting substantial magnetic hysteresis and a large anomalous Hall signal at zero magnetic field. Finally, our discovery of a C = 2 Chern insulator at zero magnetic field should open up opportunities for discovering correlated topological states, possibly with topological excitations, in nearly flat and topologically nontrivial moiré minibands.

36 MATERIALS SCIENCE↗

Kinetic pathways of ionic transport in fast-charging lithium titanate

Fast-charging batteries typically use electrodes capable of accommodating lithium continuously by means of solid-solution transformation because they have few kinetic barriers apart from ionic diffusion. One exception is lithium titanate (Li 4 Ti 5 O 12 ), an anode exhibiting extraordinary rate capability apparently inconsistent with its two-phase reaction and slow Li diffusion in both phases. Through real-time tracking of Li+ migration using operando electron energy-loss spectroscopy, we reveal that facile transport in Li 4+x Ti 5 O 12 is enabled by kinetic pathways comprising distorted Li polyhedra in metastable intermediates along two-phase boundaries. Our work demonstrates that high-rate capability may be enabled by accessing the energy landscape above the ground state, which may have fundamentally different kinetic mechanisms from the ground-state macroscopic phases. This insight should present new opportunities in searching for high-rate electrode materials.

25 ENERGY STORAGE↗

N-doped honeycomb-like porous carbon towards high-performance supercapacitor

Biomass-derived porous carbon with developed pore structure is critical to achieving high performance electrode materials. In this work, we report a grape-based honeycomb-like porous carbon (GHPC) prepared by KOH activation and carbonization, followed by N-doping (NGHPC). The obtained NGHPC exhibits a unique honeycomb-like structure with hierarchically interconnected micro/mesopores, and high specific surface area of 1268 m2/g. As a supercapacitor electrode, the NGPHC electrode exhibits a remarkable specific capacitance of 275 F/g at 0.5 A/g in a three-electrode cell. Moreover, the NGHPC//NGHPC symmetric supercapacitor displays a high energy density of 12.6 Wh/kg, and excellent cycling stability of approximately 95.2% capacitance retention after 5000 cycles at 5 A/g. The excellent electrochemical performance of NGHPC is ascribed to its high specific surface area, honeycomb-like structure and high-content of pyrodinic-N (36.29%). It is believed that grape-based carbon materials show great potential as advanced electrode materials for supercapacitors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Preface to Special Issue on Advances in Ceria Catalysis

Ceria, which acts as a “star” among the metal-oxides, has established to be one of the most promising materials for chemical transformations and energy applications owing to its redox and acid–base properties. Ceria has become a key component in three-way catalytic converters, water-gas shift reaction, CO oxidation, methane combustion, and complex organic reactions. More importantly, introducing of other metals to ceria, tailoring the shape of the ceria, and reducing structure size of ceria, usually decrease the formation energy of oxygen vacancy (Vö) and lead to unique catalytic performances.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Large-area epitaxial growth of curvature-stabilized ABC trilayer graphene

The properties of van der Waals (vdW) materials often vary dramatically with the atomic stacking order between layers, but this order can be difficult to control. Trilayer graphene (TLG) stacks in either a semimetallic ABA or a semiconducting ABC configuration with a gate-tunable band gap, but the latter has only been produced by exfoliation. Here we present a chemical vapor deposition approach to TLG growth that yields greatly enhanced fraction and size of ABC domains. The key insight is that substrate curvature can stabilize ABC domains. Controllable ABC yields ~59% were achieved by tailoring substrate curvature levels. ABC fractions remained high after transfer to device substrates, as confirmed by transport measurements revealing the expected tunable ABC band gap. Substrate topography engineering provides a path to large-scale synthesis of epitaxial ABC-TLG and other vdW materials.

36 MATERIALS SCIENCE↗

Reversible writing of high-mobility and high-carrier-density doping patterns in two-dimensional van der Waals heterostructures

A key feature of two-dimensional materials is that the sign and concentration of their carriers can be externally controlled with techniques such as electrostatic gating. However, conventional electrostatic gating has limitations, including a maximum carrier density set by the dielectric breakdown, and ionic liquid gating and direct chemical doping also suffer from drawbacks. In this work, we show that an electron-beam-induced doping technique can be used to reversibly write high-resolution doping patterns in hexagonal boron nitride-encapsulated graphene and molybdenum disulfide (MoS 2 ) van der Waals heterostructures. The doped MoS 2 device exhibits an order of magnitude decrease of subthreshold swing compared with the device before doping, whereas the doped graphene devices demonstrate a previously inaccessible regime of high carrier concentration and high mobility, even at room temperature. We also show that the approach can be used to write high-quality p–n junctions and nanoscale doping patterns, illustrating that the technique can create nanoscale circuitry in van der Waals heterostructures.

36 MATERIALS SCIENCE↗

Visualization of the flat electronic band in twisted bilayer graphene near the magic angle twist

Bilayer graphene was theorized to host a moire miniband with flat dispersion if the layers are stacked at specific twist angles known as the magic angles. Recently, such twisted bilayer graphene (tBLG) with the first magic angle twist was reported to exhibit correlated insulating state and superconductivity, where the presence of the flat miniband in the system is thought to be essential for the emergence of these ordered phases in the transport measurements. Tunneling spectroscopy and electronic compressibility measurements in tBLG have revealed a van Hove singularity that is consistent with the presence of the flat miniband. However, a direct observation of the flat dispersion in the momentum-space of such moire miniband in tBLG is still elusive. Here, we report the visualization of the flat moire miniband by using angle-resolved photoemission spectroscopy with nanoscale resolution (nanoARPES). The high spatial resolution in nanoARPES enabled the measurement of the local electronic structure of the tBLG. We clearly demonstrate the existence of the flat moire band near the charge neutrality for tBLG close to the magic angle at room temperature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Sulfide Transformation with Tellurium Treatment for Y15 Free-Cutting Steel

To investigate the effect of tellurium on the morphology of sulfide, various amounts of tellurium powders were added to the Y15 free-cutting commercial steel melt and then the melt was cooled in different cooling modes. The composition and morphology of sulfide and telluride in steel were analyzed to investigate the mechanism of MnS transformation combined with in situ observation. The results showed that the precipitation of chain-like MnS inclusions was significantly inhibited due to the addition of tellurium, and these MnS inclusions were transformed into complex inclusions with lower aspect ratios, which were composed of MnS and MnTe. In air-cooling mode, the MnS inclusions were effectively spheroidized when the w([Te])/w([S]) in steel was 0.2, whereas tellurium had almost no effect on the morphology of sulfide in furnace-cooling mode. The mechanism of sulfide spheroidization is discussed. The mechanism was verified by in situ observation experiment through high-temperature laser confocal microscopy.

36 MATERIALS SCIENCE↗

Cooling Induced Surface Reconstruction during Synthesis of High-Ni Layered Oxides

Transition metal layered oxides have been the dominant cathodes in lithium-ion batteries, and among them, high-Ni ones (LiNi x Mn y Co z O 2 ; x ≥ 0.7) with greatly boosted capacity and reduced cost are of particular interest for large-scale applications. The high Ni loading, on the other hand, raises the concern of surface instability and poor rate performance. The rational design of synthesis leading to layered LiNi 0.7 Mn 0.15 Co 0.15 O 2 with greatly enhanced rate capability is reflected, by implementing a quenching process alternative to the general slow cooling. In situ synchrotron X-ray diffraction, coupled with surface analysis, is applied to studies of the synthesis process, revealing cooling-induced surface reconstruction involving Li 2 CO 3 accumulation, formation of a Li-deficient layer and Ni reduction at the particle surface. The reconstruction process happens predominantly at high temperatures (above 350 °C) and is highly cooling-rate dependent, implying that surface reconstruction can be suppressed through synthetic control, i.e., quenching to improve the surface stability and rate performance of the synthesized materials. These findings may provide guidance to rational synthesis of high-Ni cathode materials.

25 ENERGY STORAGE↗

Accurate Control of Core–Shell Upconversion Nanoparticles through Anisotropic Strain Engineering

Abstract The effect of anisotropic interfacial strain on epitaxial growth and optical emission of sodium rare‐earth fluoride core–shell nanoparticles is investigated. A variety of sodium rare‐earth fluoride shells are grown on hexagonal‐phase NaYF 4 :Yb/Er core for providing anisotropic tuning of interfacial strains. Using high‐resolution transmission electron microscopy and X‐ray diffraction characterizations, the correlations between the epitaxial habits and the interfacial strains are quantitatively addressed. Furthermore, the growth affinity is tuned by controlling precursor concentration in conjunction with Ca 2+ doping, which results in accurate regulation of the anisotropic growth. The lattice strain resulting from mismatched epitaxy is found to enhance luminescence response of the nanoparticles to temperature change.

Zhao, Jianxiong↗

Identification of spin, valley and moiré quasi-angular momentum of interlayer excitons

Moiré superlattices provide a powerful way to engineer properties of electrons and excitons in two-dimensional van der Waals heterostructures. The moir\'e effect can be especially strong for interlayer excitons, where electrons and holes reside in different layers and can be addressed separately. In particular, it was recently proposed that the moiré superlattice potential not only localizes interlayer exciton states at different superlattice positions, but also hosts an emerging moiré quasi-angular momentum (QAM) that periodically switches the optical selection rules for interlayer excitons at different moiré sites. Here we report the observation of multiple interlayer exciton states coexisting in a WSe 2 /WS 2 moiré superlattice and unambiguously determine their spin, valley, and moiré QAM through novel resonant optical pump-probe spectroscopy and photoluminescence excitation spectroscopy. We demonstrate that interlayer excitons localized at different moiré sites can exhibit opposite optical selection rules due to the spatially-varying moiré QAM. Finally, our observation reveals new opportunities to engineer interlayer exciton states and valley physics with moiré superlattices for optoelectronic and valleytronic applications.

74 ATOMIC AND MOLECULAR PHYSICS↗

Ni/Li Disordering in Layered Transition Metal Oxide: Electrochemical Impact, Origin, and Control

Lithium-ion batteries (LIBs) not only power most of today’s hybrid electric vehicles (HEV) and electric vehicles (EV) but also are considered as a very promising system for grid-level storage. Large-scale applications for LIBs require substantial improvement in energy density, cost, and lifetime. Layered Li(NixMnyCoz)O2 (NMC, x+y+z=1) materials from solid-solution approaches to LiMO2 (M = Ni, Mn, Co, etc) are the most promising candidates for their high reversible capacity, better environmental compatibility, and lower cost compared with the traditional LiCoO2. In order to further boost Li storage capacity, a great deal of attention has been directed toward developing Ni-rich NMCs. However, structural disorder as a result of Ni/Li exchange in octahedral sites becomes a critical issue when Ni content increases to high values, as it leads to a detrimental effect on Li diffusivity, cycling stability, first-cycle efficiency, and overall electrode performance. Increasing efforts have been dedicated to improving the electrochemical performance of NMC materials via reduction of cationic mixing. Therefore, it is important to summarize this research field and provide in-depth insight into impact of Ni/Li disorder on electrochemical characteristics in layered NMC materials and its origin to accelerate the future development of NMC materials with high performance. In this Account, we start by analyzing the impact of Ni/Li disorder on electrochemical characteristics in layered NMC materials. The antisite Ni in the Li layer can limit the rate performance by impeding the Li-ion transport. It will also degrade the cycling stability by inducing the anisotropic stress in the bulk structure. Nevertheless, the antisite Ni-ions don’t always bring drawbacks to the electrochemical performance, some studies including our works found that it can improve the thermal stability and the cycling structure stability of Ni-rich NMC materials. We next discussed the driving forces and the kinetic advantages accounting for the Ni/Li exchange and summarized that the steric effect of cation size and the magnetic interactions between TM cations are the two main driving forces to promote the Ni/Li exchange during synthesis procedure and the electrochemical cycling, and the low energy barrier of Ni2+ migration from the 3a site in TM layer to 3b site in Li layer further provides the kinetic advantage. Based on above understandings, we reviewed the progress made to control the Ni/Li disorder and summarized three main ways: (i) suppressing the driving force from the steric effect by ion exchange; (ii) tuning the magnetic interaction by cationic substitution; (iii) kinetic controlling of Ni migration. Finally, our brief outlooks on the future development of controlling the Ni/Li disorder in NMC materials are provided. It is believed that this Account will provide significant understanding and inspirations toward developing high-performance NMC materials with controlled Ni/Li disorder.

Zheng, Jiaxin↗

Numerical Simulation of the Three-Phase Flow of a Bubble Interacting with the Steel–Slag Interface During the Secondary Refining Process

Gas stirring is an effective method for the secondary refining process of steel. The microphenomena among the phases of an argon bubble floating in steel and motion across the steel–slag interface were simulated and discussed with a sharp interface tracking method. A water-model experiment was set to validate the numerical model, and the experimental results showed agreement with the numerical model. A critical size for bubbles to pass the interface was found using the model.

36 MATERIALS SCIENCE↗

Valley-dependent exciton fine structure and Autler–Townes doublets from Berry phases in monolayer MoSe 2

The Berry phase of Bloch states can have profound effects on electron dynamics and lead to novel transport phenomena, such as the anomalous Hall effect and the valley Hall effect. Recently, it was predicted that the Berry phase effect can also modify the exciton states in transition metal dichalcogenide monolayers, and lift the energy degeneracy of exciton states with opposite angular momentum through an effective valley-orbital coupling. Here, we report the observation and control of the Berry phase-induced splitting of the 2p exciton states in monolayer molybdenum diselenide (MoSe 2 ) using the intraexciton optical Stark spectroscopy. We observe the time-reversal-symmetric analogue of the orbital Zeeman effect resulting from the valley-dependent Berry phase, which leads to energy difference of +14 (-14) meV between the 2p+ and 2p- exciton states in the K (K') valley, consistent with the ordering from our ab initio GW-Bethe–Salpeter equation results. In addition, we show that the light–matter coupling between intraexciton states is remarkably strong, leading to a prominent valley-dependent Autler–Townes doublet under resonant driving. Finally, our study opens up pathways to coherently manipulate the quantum states and excitonic excitation with infrared radiation in two-dimensional semiconductors.

36 MATERIALS SCIENCE↗

Signatures of tunable superconductivity in a trilayer graphene moiré superlattice

Understanding the mechanism of high-transition-temperature (high-T c ) superconductivity is a central problem in condensed matter physics. It is often speculated that high-Tc superconductivity arises in a doped Mott insulator1 as described by the Hubbard model 2,3,4 . An exact solution of the Hubbard model, however, is extremely challenging owing to the strong electron–electron correlation in Mott insulators. Therefore, it is highly desirable to study a tunable Hubbard system, in which systematic investigations of the unconventional superconductivity and its evolution with the Hubbard parameters can deepen our understanding of the Hubbard model. Here we report signatures of tunable superconductivity in an ABC-trilayer graphene (TLG) and hexagonal boron nitride (hBN) moiré superlattice. Unlike in ‘magic angle’ twisted bilayer graphene, theoretical calculations show that under a vertical displacement field, the ABC-TLG/hBN heterostructure features an isolated flat valence miniband associated with a Hubbard model on a triangular superlattice 5,6 where the bandwidth can be tuned continuously with the vertical displacement field. Upon applying such a displacement field we find experimentally that the ABC-TLG/hBN superlattice displays Mott insulating states below 20 kelvin at one-quarter and one-half fillings of the states, corresponding to one and two holes per unit cell, respectively. Upon further cooling, signatures of superconductivity (‘domes’) emerge below 1 kelvin for the electron- and hole-doped sides of the one-quarter-filling Mott state. The electronic behaviour in the ABC-TLG/hBN superlattice is expected to depend sensitively on the interplay between the electron–electron interaction and the miniband bandwidth. By varying the vertical displacement field, we demonstrate transitions from the candidate superconductor to Mott insulator and metallic phases. Our study shows that ABC-TLG/hBN heterostructures offer attractive model systems in which to explore rich correlated behaviour emerging in the tunable triangular Hubbard model.

36 MATERIALS SCIENCE↗

Manipulating Topological Domain Boundaries in the Single-Layer Quantum Spin Hall Insulator 1T'–WSe 2

We report the creation and manipulation of structural phase boundaries in the single-layer quantum spin Hall insulator 1T'–WSe 2 by means of scanning tunneling microscope tip pulses. We observe the formation of one-dimensional interfaces between topologically nontrivial 1T' domains having different rotational orientations, as well as induced interfaces between topologically nontrivial 1T' and topologically trivial 1H phases. Scanning tunneling spectroscopy measurements show that 1T'/1T' interface states are localized at domain boundaries, consistent with theoretically predicted unprotected interface modes that form dispersive bands in and around the energy gap of this quantum spin Hall insulator. We also observe a qualitative difference in the experimental spectral line shape between topologically “unprotected” states at 1T'/1T' domain boundaries and protected states at 1T'/1H and 1T'/vacuum boundaries in single-layer WSe 2 .

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗