Engineering Papers⌕ Search

Engineering topics

Wang, Feng

Publications and source records attributed to Wang, Feng.

At least 217 records · Page 12

Nonlinear fishbone dynamics in spherical tokamaks

Linear and nonlinear kinetic-MHD hybrid simulations have been carried out to investigate linear stability and nonlinear dynamics of beam-driven fishbone instability in spherical tokamak plasmas. Realistic NSTX parameters with finite toroidal rotation were used. The results show that the fishbone is driven by both trapped and passing particles. The instability drive of passing particles is comparable to that of trapped particles in the linear regime. The effects of rotation are destabilizing and a new region of instability appears at higher q min (>1.5) values, q min being the minimum of safety factor profile. In the nonlinear regime, the mode saturates due to flattening of beam ion distribution, and this persists after initial saturation while mode frequency chirps down in such a way that the resonant trapped particles move out radially and keep in resonance with the mode. Correspondingly, the flattening region of beam ion distribution expands radially outward. A substantial fraction of initially non-resonant trapped particles become resonant around the time of mode saturation and keep in resonance with the mode as frequency chirps down. On the other hand, the fraction of resonant passing particles is significantly smaller than that of trapped particles. Our analysis shows that trapped particles provide the main drive to the mode in the nonlinear regime.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Imaging electric field dynamics with graphene optoelectronics

The use of electric fields for signalling and control in liquids is widespread, spanning bioelectric activity in cells to electrical manipulation of microstructures in lab-on-a-chip devices. However, an appropriate tool to resolve the spatio-temporal distribution of electric fields over a large dynamic range has yet to be developed. Here we present a label-free method to image local electric fields in real time and under ambient conditions. Our technique combines the unique gate-variable optical transitions of graphene with a critically coupled planar waveguide platform that enables highly sensitive detection of local electric fields with a voltage sensitivity of a few microvolts, a spatial resolution of tens of micrometres and a frequency response over tens of kilohertz. Our imaging platform enables parallel detection of electric fields over a large field of view and can be tailored to broad applications spanning lab-on-a-chip device engineering to analysis of bioelectric phenomena.

59 BASIC BIOLOGICAL SCIENCES↗

Nonlinear fishbone dynamics in spherical tokamaks

Linear and nonlinear kinetic-MHD hybrid simulations have been carried out to investigate linear stability and nonlinear dynamics of beam-driven fishbone instability in spherical tokamak plasmas. Realistic NSTX parameters with finite toroidal rotation were used. Our results show that the fishbone is driven by both trapped and passing particles. The instability drive of passing particles is comparable to that of trapped particles in the linear regime. The effects of rotation are destabilizing and a new region of instability appears at higher q min (>1.5) values, q min being the minimum of safety factor profile. In the nonlinear regime, the mode saturates due to flattening of beam ion distribution, and this persists after initial saturation while mode frequency chirps down in such a way that the resonant trapped particles move out radially and keep in resonance with the mode. Correspondingly, the flattening region of beam ion distribution expands radially outward. Furthermore, a substantial fraction of initially non-resonant trapped particles become resonant around the time of mode saturation and keep in resonance with the mode as frequency chirps down. On the other hand, the fraction of resonant passing particles is significantly smaller than that of trapped particles. Finally, our analysis shows that trapped particles provide the main drive to the mode in the nonlinear regime.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

In Situ Probing and Synthetic Control of Cationic Ordering in Ni-Rich Layered Oxide Cathodes

Ni-rich layered oxides (LiNi1-xMxO2; M = Co, Mn, ...) are appealing alternatives to conventional LiCoO2 as cathodes in Li-ion batteries for automobile and other large-scale applications due to their high theoretical capacity and low cost. However, preparing stoichiometric LiNi1-xMxO2 with ordered layer structure and high reversible capacity, has proven difficult due to cation mixing in octahedral sites. Herein, in situ studies of synthesis reactions and the associated structural ordering in preparing LiNiO2 and the Co-substituted variant, LiNi0.8Co0.2O2, are made, to gain insights into synthetic control of the structure and electrochemical properties of Ni-rich layered oxides. Results from this study indicate a direct transformation of the intermediate from the rock salt structure into hexagonal phase, and during the process, Co substitution facilities the nucleation of a Co-rich layered phase at low temperatures and subsequent growth and stabilization of solid solution Li(Ni, Co)O-2 upon further heat treatment. Optimal conditions are identified from the in situ studies and utilized to obtain stoichiometric LiNi0.8Co0.2O2 that exhibits high capacity (up to 200 mA h g(-1) ) with excellent retention. The findings shed light on designing high performance Ni-rich layered oxide cathodes through synthetic control of the structural ordering in the materials.

Zhao, Jianqing↗

On Optical Dipole Moment and Radiative Recombination Lifetime of Excitons in WSe 2

Optical dipole moment is the key parameter of optical transitions, as it directly determines the strength of light–matter interaction such as intrinsic radiative lifetime. However, experimental determination of these fundamental properties of excitons in monolayer WSe 2 is largely limited, because the commonly used measurement, such as (time-resolved) photoluminescence, is inherently difficult to probe the intrinsic properties. For example, dark states below bright exciton can change the photoluminescence emission rate by orders of magnitude and gives an “effective” radiative lifetime distinctive from the intrinsic one. On the other hand, such “effective” radiative lifetime becomes important itself because it describes how dark states affect exciton dynamics. Unfortunately, the “effective” radiative lifetime in monolayer WSe 2 is also not determined as it requires photoluminescence measurement with resonant excitation, which is technically difficult. These difficulties are overcome here to obtain both the “intrinsic” and “effective” radiative lifetime experimentally. A framework is developed to determine the dipole moment and “intrinsic” radiative lifetime of delocalized excitons in monolayer WSe 2 from the absorption measurements. In addition, the “effective” radiative lifetime in WSe 2 is obtained through time-resolved photoluminescence and absolute quantum-yield measurement at resonant excitation. These results provide helpful information for fundamental understanding of exciton light–matter interaction in WSe 2 .

36 MATERIALS SCIENCE↗

Local doping of two-dimensional materials

This disclosure provides systems, methods, and apparatus related to locally doping two-dimensional (2D) materials. In one aspect, an assembly including a substrate, a first insulator disposed on the substrate, a second insulator disposed on the first insulator, and a 2D material disposed on the second insulator is formed. A first voltage is applied between the 2D material and the substrate. With the first voltage applied between the 2D material and the substrate, a second voltage is applied between the 2D material and a probe positioned proximate the 2D material. The second voltage between the 2D material and the probe is removed. The first voltage between the 2D material and the substrate is removed. A portion of the 2D material proximate the probe when the second voltage was applied has a different electron density compared to a remainder of the 2D material.

36 MATERIALS SCIENCE↗

Direct observation of the layer-dependent electronic structure in phosphorene

Phosphorene, a single atomic layer of black phosphorus, has recently emerged as a new two-dimensional (2D) material that holds promise for electronic and photonic technologies. Here we experimentally demonstrate that the electronic structure of few-layer phosphorene varies significantly with the number of layers, in good agreement with theoretical predictions. The interband optical transitions cover a wide, technologically important spectral range from the visible to the mid-infrared. In addition, we observe strong photoluminescence in few-layer phosphorene at energies that closely match the absorption edge, indicating that they are direct bandgap semiconductors. The strongly layer-dependent electronic structure of phosphorene, in combination with its high electrical mobility, gives it distinct advantages over other 2D materials in electronic and opto-electronic applications.

Li, Likai↗

Lithium Metal-Copper Vanadium Oxide Battery with a Block Copolymer Electrolyte

Lithium (Li) batteries comprising multivalent positive active materials such as copper vanadium oxide have high theoretical capacity. These batteries with a conventional liquid electrolyte exhibit limited cycle life because of copper dissolution into the electrolyte. In this paper, we report here on the characterization of solid-state Li metal batteries with a positive electrode based on α-Cu 6.9 V 6 O 18.9 (α-CuVO 3 ). We replaced the liquid electrolyte by a nanostructured solid block copolymer electrolyte comprising of a mixture of polystyrene-b-poly(ethylene oxide) (SEO) and lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) salt. In situ X-ray diffraction was used to follow the Li insertion/de-insertion mechanism into the α-CuVO 3 host material and its reversibility. In situ X-ray scattering revealed that the multistep electrochemical reactions involved are similar in the presence of liquid or solid electrolyte. The capacity fade of the solid-state batteries is less rapid than that of α-CuVO 3 –Li metal batteries with a conventional liquid electrolyte. Hard X-ray microtomography revealed that upon cycling, voids and Cu-rich agglomerates were formed at the interface between the Li metal and the SEO electrolyte. Finally, the void volume and the volume occupied by the Cu-rich agglomerates were independent of C-rate and cycle number.

25 ENERGY STORAGE↗

In situ, operando measurements of rechargeable batteries

This article reviews recent in operando measurements (IOMs) for addressing challenges in advancing rechargeable battery (RB) technologies. As the demands on energy and power density of RBs for broader applications continue to grow, current RB technologies are pushed to their theoretical and engineering limits while new approaches are being extensively investigated. Also, IOMs have become more powerful and effective research tools in recent years; they will play an essential role in developing next generation RBs. This review is organized around outstanding issues in battery science and engineering. Finally, we emphasize the critical need for quantifying the distribution and transport of active ions in functioning batteries over wide temporal and spatial scales in real time.

25 ENERGY STORAGE↗

β-O-4 Bond Cleavage Mechanism for Lignin Model Compounds over Pd Catalysts Identified by Combination of First-Principles Calculations and Experiments

Lignin in lignocellulosic biomass is the only renewable source for aromatic compounds, and effective valorization of lignin remains a significant challenge in biomass conversion processes. Here, we have performed density functional theory calculations and experiments to investigate the cleavage mechanism of the C–O ether bond in the lignin model compound 2-phenoxy-1-phenylethanol with a β-O-4 linkage over a Pd(111) catalyst surface model. We propose the favorable reaction pathway to proceed as follows: the dilignol reactant gets dehydrogenated first on the α-carbon and then on the -OH group to generate its corresponding ketone 2-phenoxy-1-phenylethanone; the ketone continues to get dehydrogenated on the β-carbon by first a equilibrated keto–enol tautomerization to its enol form and then -OH dehydrogenation; finally, the C–O ether bond cleavage happens afterward, leading to one-aromatic-ring surface intermediates followed by hydrogenation to yield acetophenone and phenol.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Zonal Soil Type Determines Soil Microbial Responses to Maize Cropping and Fertilization

Microbial communities are essential drivers of soil functional processes such as nitrification and heterotrophic respiration. Although there is initial evidence revealing the importance of soil type in shaping microbial communities, there has been no in-depth, comprehensive survey to robustly establish it as a major determinant of microbial community composition, functional gene structure, or ecosystem functioning. We examined bacterial and fungal community structures using Illumina sequencing, microbial functional genes using GeoChip, microbial biomass using phospholipid fatty acid analysis, as well as functional processes of soil nitrification potential and CO 2 efflux. We demonstrated the critical role of soil type in determining microbial responses to land use changes at the continental level. Our findings underscore the inherent difficulty in generalizing ecosystem responses across landscapes and suggest that assessments of community feedback must take soil types into consideration. Soil types heavily influence ecological dynamics. It remains controversial to what extent soil types shape microbial responses to land management changes, largely due to lack of in-depth comparison across various soil types. Here, we collected samples from three major zonal soil types spanning from cold temperate to subtropical climate zones. We examined bacterial and fungal community structures, as well as microbial functional genes. Different soil types had distinct microbial biomass levels and community compositions. Five years of maize cropping (growing corn or maize) changed the bacterial community composition of the Ultisol soil type and the fungal composition of the Mollisol soil type but had little effect on the microbial composition of the Inceptisol soil type. Meanwhile, 5 years of fertilization resulted in soil acidification. Microbial compositions of the Mollisol and Ultisol, but not the Inceptisol, were changed and correlated ( P < 0.05) with soil pH. These results demonstrated the critical role of soil type in determining microbial responses to land management changes. We also found that soil nitrification potentials correlated with the total abundance of nitrifiers and that soil heterotrophic respiration correlated with the total abundance of carbon degradation genes, suggesting that changes in microbial community structure had altered ecosystem processes. Microbial communities are essential drivers of soil functional processes such as nitrification and heterotrophic respiration. Although there is initial evidence revealing the importance of soil type in shaping microbial communities, there has been no in-depth, comprehensive survey to robustly establish it as a major determinant of microbial community composition, functional gene structure, or ecosystem functioning. We examined bacterial and fungal community structures using Illumina sequencing, microbial functional genes using GeoChip, microbial biomass using phospholipid fatty acid analysis, as well as functional processes of soil nitrification potential and CO 2 efflux. We demonstrated the critical role of soil type in determining microbial responses to land use changes at the continental level. Our findings underscore the inherent difficulty in generalizing ecosystem responses across landscapes and suggest that assessments of community feedback must take soil types into consideration.

59 BASIC BIOLOGICAL SCIENCES↗

Imaging electrostatically confined Dirac fermions in graphene quantum dots

Electrostatic confinement of charge carriers in graphene is governed by Klein tunnelling, a relativistic quantum process in which particle-hole transmutation leads to unusual anisotropic transmission at p-n junction boundaries. Reflection and transmission at these boundaries affect the quantum interference of electronic waves, enabling the formation of novel quasi-bound states. Here we report the use of scanning tunnelling microscopy to map the electronic structure of Dirac fermions confined in quantum dots defined by circular graphene p-n junctions. The quantum dots were fabricated using a technique involving local manipulation of defect charge within the insulating substrate beneath a graphene monolayer. Inside such graphene quantum dots we observe resonances due to quasi-bound states and directly visualize the quantum interference patterns arising from these states. Outside the quantum dots Dirac fermions exhibit Friedel oscillation-like behaviour. Bolstered by a theoretical model describing relativistic particles in a harmonic oscillator potential, our findings yield insights into the spatial behaviour of electrostatically confined Dirac fermions.

74 ATOMIC AND MOLECULAR PHYSICS↗

Nanofluid of graphene-based amphiphilic Janus nanosheets for tertiary or enhanced oil recovery: High performance at low concentration

Significance Improving crude oil recovery by 1% worldwide would result in a huge amount of crude oil resources becoming available. However, the economic and environmental concerns are too serious to ignore when chemical methods (surfactants or polymers flooding, etc.) are used for an average 10–20% enhancement for tertiary oil recovery. Simple nanofluid (containing only nanoparticles) flooding at low concentration (0.01 wt % or less) is a promising alternative, but the efficiency is below 5% in a saline environment (2 wt % or higher NaCl content). We report a simple nanofluid of graphene-based Janus amphiphilic nanosheets for enhanced oil recovery with efficiency of about 15.2%, comparable to chemical methods, which is both economically and environmentally beneficial to the petroleum industry.

Luo, Dan↗

A simple method to prevent hard X-ray-induced preheating effects inside the cone tip in indirect-drive fast ignition implosions

During fast-ignition implosions, preheating of inside the cone tip caused by hard X-rays can strongly affect the generation and transport of hot electrons in the cone. Although indirect-drive implosions have a higher implosion symmetry, they cause stronger preheating effects than direct-drive implosions. To control the preheating of the cone tip, we propose the use of indirect-drive fast-ignition targets with thicker tips. Experiments carried out at the ShenGuang-III prototype laser facility confirmed that thicker tips are effective for controlling preheating. Moreover, these results were consistent with those of 1D radiation hydrodynamic simulations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗