Engineering Papers⌕ Search

Engineering topics

Wang, A.

Publications and source records attributed to Wang, A..

34 records · Page 2

Mars Exploration Rover Pancam Multispectral Imaging of Rocks, Soils, and Dust at Gusev Crater and Meridiani Planum

Multispectral imaging from the Panoramic Camera (Pancam) instruments on the Mars Exploration Rovers Spirit and Opportunity has provided important new insights about the geology and geologic history of the rover landing sites and traverse locations in Gusev crater and Meridiani Planum. Pancam observations from near-UV to near-IR wavelengths provide limited compositional and mineralogic constraints on the presence abundance, and physical properties of ferric- and ferrous-iron bearing minerals in rocks, soils, and dust at both sites. High resolution and stereo morphologic observations have also helped to infer some aspects of the composition of these materials at both sites. Perhaps most importantly, Pancam observations were often efficiently and effectively used to discover and select the relatively small number of places where in situ measurements were performed by the rover instruments, thus supporting and enabling the much more quantitative mineralogic discoveries made using elemental chemistry and mineralogy data. This chapter summarizes the major compositionally- and mineralogically-relevant results at Gusev and Meridiani derived from Pancam observations. Classes of materials encountered in Gusev crater include outcrop rocks, float rocks, cobbles, clasts, soils, dust, rock grindings, rock coatings, windblown drift deposits, and exhumed whitish/yellowish salty soils. Materials studied in Meridiani Planum include sedimentary outcrop rocks, rock rinds, fracture fills, hematite spherules, cobbles, rock fragments, meteorites, soils, and windblown drift deposits. This chapter also previews the results of a number of coordinated observations between Pancam and other rover-based and Mars-orbital instruments that were designed to provide complementary new information and constraints on the mineralogy and physical properties of martian surface materials.

Bell, J. F., III↗

A Survey of Olivine Alteration Products Using Raman Spectroscopy

Identification of mineral alteration products will aid in the crucial task of interpreting past Martian environmental conditions, especially aqueous environments. Olivine has been identified at the surface of Mars and is readily altered in aqueous environments. Using Raman spectroscopy, we studied three rocks with altered olivine and compared the data with mineral chemistry from electron microprobe analysis. Although the alteration in all three samples has loosely been called iddingsite their appearances and modes of occurrences differ as described. Alteration products in all three samples are likely fine-grained mixtures.

Kuebler, K.↗

Seeking and Identifying Phyllosilicates on Mars - A Simulation Study

In a simulation of seeking phyllosilicates on Mars, terrestrial ocean sediments were found to provide high quality Raman spectra of clays with low interfering fluorescence because most organic residues had been converted to graphitic carbon. Additional information is contained in the original extended abstract.

Wang, A.↗

Optical Fiber Strain Instrumentation for High Temperature Aerospace Structural Monitoring

The objective of the program is the development and laboratory demonstration of sensors based on silica optical fibers for measurement of high temperature strain for aerospace materials evaluations. A complete fiber strain sensor system based on white-light interferometry was designed and implemented. An experiment set-up was constructed to permit testing of strain measurement up to 850 C. The strain is created by bending an alumina cantilever beam to which is the fiber sensor is attached. The strain calibration is provided by the application of known beam deflections. To ensure the high temperature operation capability of the sensor, gold-coated single-mode fiber is used. Moreover, a new method of sensor surface attachment which permits accurate sensor gage length determination is also developed. Excellent results were obtained at temperatures up to 800-850 C.

Wang, A.↗

The Mars Microbeam Raman Spectrometer (MMRS)

The Mars Microbeam Raman Spectrometer can identify minerals in situ, determine rock types and textures, provide some mineral chemistry, detect organic and biogenic materials, and identify bound water. Additional information is contained in the original extended abstract.

Haskin, L. A.↗

Trace-Element Concentrations in Northwest Africa 032

Trace-element concentrations (INAA) are presented for four samples of the NWA 032 lunar meteorite. The mare basalt has a moderately high Th concentration (1.9 ppm) and a higher Th/REE ratio than any other known mare basalt. Additional information is contained in the original extended abstract.

Korotev, R. L.↗

Preliminary Raman Spectroscopic Survey on a Martian Meteorite - Los Angeles

A Raman survey on a flat-sawn rock slab provides the major mineralogy of martian meteorite Los Angeles. Three unreported accessory minerals and seven terrestrial alteration products and contaminants (organic and inorganic) were also found. Additional information is contained in the original extended abstract.

Wang, A.↗

Biological Sterilization of Returned Mars Samples

Martian rock and soil, collected by robotic spacecraft, will be returned to terrestrial laboratories early in the next century. Current plans call for the samples to be immediately placed into biological containment and tested for signs of present or past life and biological hazards. It is recommended that "Controlled distribution of unsterilized materials from Mars should occur only if rigorous analyses determine that the materials do not constitute a biological hazard. If any portion of the sample is removed from containment prior to completion of these analyses it should first be sterilized." While sterilization of Mars samples may not be required, an acceptable method must be available before the samples are returned to Earth. The sterilization method should be capable of destroying a wide range of organisms with minimal effects on the geologic samples. A variety of biological sterilization techniques and materials are currently in use, including dry heat, high pressure steam, gases, plasmas and ionizing radiation. Gamma radiation is routinely used to inactivate viruses and destroy bacteria in medical research. Many commercial sterilizers use Co-60 , which emits gamma photons of 1.17 and 1.33 MeV. Absorbed doses of approximately 1 Mrad (10(exp 8) ergs/g) destroy most bacteria. This study investigates the effects of lethal doses of Co-60 gamma radiation on materials similar to those anticipated to be returned from Mars. The goals are to determine the gamma dose required to kill microorganisms in rock and soil samples and to determine the effects of gamma sterilization on the samples' isotopic, chemical and physical properties. Additional information is contained in the original extended abstract.

Allen, C. C.↗

Analyses of near- and far-field two-lobe patterns outside the output endface of a two-mode fiber

The behaviors of the near- and far-field two-lobe radiation patterns from a circular-core two-mode fiber are studied by using both the mode and Kirchhoff diffraction theories. The electric field outside the output endface of the fiber is derived from the electric field distribution of the LP sub 01 and LP sub 11 modes at the fiber endface using the Kirchhoff diffraction formula. Different phenomena are studied by solving this expression numerically at near-and far-fields. The Gouy phase shifts are quantitatively evaluated at cross-sections of the near field. The results reveal the distortion and dislocation of the far-field two-lobe pattern induced by an inclination angle of the fiber endface.

Wang, A.↗