Engineering Papers⌕ Search

Engineering topics

Walter Waltz

Publications and source records attributed to Walter Waltz.

8 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2020

State of the Profession Considerations: NASA Langley Research Center Capabilities / Technologies for Autonomous In-Space Assembly and Modular Persistent Assets

Successfully implementing OSAM into next generation revolutionary observatories requires integrating expertise and technologies in modular space structures, assembly operations, autonomy, and modeling/simulation. LaRC OSAM technologies/capabilities have been presented to inform the Planetary Science and Astrobiology Decadal Survey community of the robust and mature existing capability to support an OSAM based architecture for their next observatory. LaRC Structures and Assembly capabilities enable; a modular telescope architecture, high-performance structural modules, and robotic assembly techniques. LaRC Autonomy capabilities ensure that the robotic assembly will be accomplished in a safe and robust manner and only require humans in a supervisory role. The LaRC toolbox of Modeling and Simulation capabilities that is calibrated using module-level ground testing, will ensure that the performance of the fully assembled observatory, a very large zero-g system that will never be assembled/tested in a gravity environment, meets all performance requirements when it enters into service. Integrating all three LaRC capabilities and including embedded metrology, will enable servicing, repair, instrument upgrades (and/or replacement) while ensuring a very long lifetime for the observatory and providing a return-on-investment that is substantially greater than the initial cost. Further confidence will be achieved as OSAM technologies are validated in a new LaRC OSAM laboratory that allows large-scale collaborative testing of modular hardware, simulation software and algorithms, and autonomous agents.

Large space structures↗
NASA NTRSDate not supplied

Trajectory Optimization for dynamic tool Systems Swapping

Develop capability to reliably execute a handoff of the grapple tool between two robot arms in difficult environments. Goals for the end of summer include evaluating different approaches to state estimation and determine optimal handoff poses based on a given scene.

Dominic Bisio↗
NASA NTRSDate not supplied

LANDO: Developing Autonomous Surface Operations for Planetary Surfaces

The Lightweight Surface Manipulation System (LSMS) AutoNomy capabilities Development for surface Operations and construction (LANDO) project is an Early Career Initiative (ECI) selected for funding by the Space Technology Mission Directorate (STMD) beginning in fiscal year 2022. Over the two-year project duration, the LANDO project will deliver a general-purpose autonomy framework applicable to serial and tension-actuated manipulation agents, that has been validated using an existing prototype of the LSMS-L35 (35-kg wrist lift capacity on the lunar surface, sized for a Commercial Lunar Payload Services (CLPS) mission). Specific to the LANDO project, the autonomous LSMS-L35 will be used to demonstrate autonomous payload handling capabilities for Lunar and other planetary surfaces, directly addressing STMD capability gaps in autonomous surface construction (ASC) operations, advanced robotics and spacecraft autonomy technologies, and technologies supporting emerging space industries including the On-orbit Servicing, Assembly and Manufacturing (OSAM) National Initiative. In this paper, an overview of the LANDO ECI project is presented.

autonomy↗
NASA NTRSDate not supplied

Supervised Autonomous Assembly to Create and Evolve Persistent Assets

Supervised autonomous assembly (SAA) will create a paradigm shift in the planning and design of future persistent assets (PAs), both in near zero-g environments and on planetary surfaces. SAA refers to an autonomy approach that has the benefits of autonomous assembly as well as the benefits provided by a supervisor (operator) who is available to resolve unexpected situations. SAA provides both increased design freedom as well as reduced programmatic risk. SAA enables evolution of future PAs over decades as in-space operations transition from single purpose missions to creation of PAs, such as laboratories and experimental stations which more closely resembling terrestrial laboratories that can easily adapt and evolve to new missions leveraging repeated visits to the PA. The ability to evolve enables PAs to rapidly respond to changing objectives resulting from new questions as our understanding improves. A recently initiated National Aeronautics and Space Administration (NASA) project in the Space Technology Mission Directorate (STMD) Game Changing Development (GCD) Program called the Precision Assembled Space Structure (PASS), leverages the advantages of SAA to develop technologies that enable efficient creation and evolution of hexagonal topologies; both planar (example: fuel depots) and curved (examples: telescopes and shelters). PASS will be used to provide context for the philosophy and concepts discussed as well as the decision and selections made. PASS objectives are: a) Develop confidence in SAA and on-orbit servicing, assembly and manufacturing (OSAM) technologies by executing a test campaign that uses a path-to-flight autonomous precision assembly process directly applicable to future space telescopes. b) Test autonomous technologies including automated path planning and error recovery, to emphasize a robust approach that relies on generic robots and special purpose tools. c) Validate critical component models using a digital twin that includes the assembled primary mirror support structure and assembly process. A digital twin is a high-fidelity simulation of the asset capable of predicting the on-orbit performance. The paper concludes after identifying the critical need for a modest assembly flight experiment to validate and develop confidence in the SAA paradigm, thus accelerating adoption of the benefits described. SAA is a game changing paradigm that enhances the ability of an organization to infuse new technology through rapid evolution of PAs while leveraging OSAM technologies.

Structural Modeling↗
NASA NTRSDate not supplied

LANDO: Developing autonomous surface operations for planetary surfaces

The Lightweight Surface Manipulation System (LSMS) AutoNomy capabilities Development for surface Operations and construction (LANDO) project is an Early Career Initiative (ECI) selected for funding by the Space Technology Mission Directorate (STMD) beginning in fiscal year 2022. Over the two-year project duration, the LANDO project will deliver a general-purpose autonomy framework applicable to serial and tension-actuated manipulation agents, that has been validated using an existing prototype of the LSMS-L35 (35-kg wrist lift capacity on the lunar surface, sized for a Commercial Lunar Payload Services (CLPS) mission). Specific to the LANDO project, the autonomous LSMS-L35 will be used to demonstrate autonomous payload handling capabilities for Lunar and other planetary surfaces, directly addressing STMD capability gaps in autonomous surface construction (ASC) operations, advanced robotics and spacecraft autonomy technologies, and technologies supporting emerging space industries including the On-orbit Servicing, Assembly and Manufacturing (OSAM) National Initiative. In this paper, an overview of the LANDO ECI project is presented.

autonomy↗
NASA NTRSDate not supplied

Performance Evaluation of a Cartesian Move Algorithm for the LSMS Family of Cable-Driven Cranes

The Lightweight Surface Manipulation System, or LSMS, is a family of cable-actuated cranes, designed for surface operations on the Moon and Mars. Its structural design focuses on three fundamental traits for space environments: a high payload-to-mass ratio to reduce launch costs, compactness for space travel in reduced cargo bays, and self-erecting capabilities for operations before astronauts arrive. The resulting design confers nonlinear and switched dynamics to the LSMS, making these cranes an interesting challenge for autonomous and teleoperated applications. One of the protocols required for these applications is a Cartesian move algorithm. This algorithm is responsible for placing the end effector of the crane at a desired location, specified in Cartesian coordinates. This paper evaluates the performance of a Cartesian move algorithm developed for the LSMS at the NASA Langley Research Center. To this end, several payload manipulation tasks were performed with LSMS-L35, the smallest version within the LSMS family. The evaluated algorithm can place the end effector with accuracy, as shown in the hardware and simulation tests.

cable-actuated↗