Engineering Papers⌕ Search

Engineering topics

Wallace, G. R.

Publications and source records attributed to Wallace, G. R..

11 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1977

Method of and means for testing a tape record/playback system

A tape record/playback system was tested by first deriving an analog test signal and a band-limited digital reference signal from a pseudo-noise sequence generator driven by a clock signal. It recorded the signals on respective tracks of the system during operation in a record mode. During the playback mode of operation of the system, a delayed analog reference signal without time base variations was reconstructed from the played back reference signal. It was compared with the played back test signal in order to obtain an error signal that was a measure of the performance of the system.

Wallace, G. R.↗
NASA NTRS1975

Pseudo-noise test set for communication system evaluation

A test set for communications systems is described which includes a pseudo noise sequence generator providing a test signal that is fed to a pair of signal channels. The first channel includes a spectrum shaping filter and a conditioning amplifier. The second channel includes a variable delay circuit, a spectrum shaping filter matched to the first filter, and an amplifier. The output of the first channel was applied to the system under test. The output of the system and the output of the second channel are compared to determine the degree of distortion suffered by the test signal due to the communications system.

Wallace, G. R.↗
NASA NTRS1974

The subsequence weight distribution of summed maximum length digital sequences

An attempt is made to develop mathematical formulas to provide the basis for the design of pseudorandom signals intended for applications requiring accurate knowledge of the statistics of the signals. The analysis approach involves calculating the first five central moments of the weight distribution of subsequences of hybrid-sum sequences. The hybrid-sum sequence is formed from the modulo-two sum of k maximum length sequences and is an extension of the sum sequences formed from two maximum length sequences that Gilson (1966) evaluated. The weight distribution of the subsequences serves as an approximation to the filtering process. The basic reason for the analysis of hybrid-sum sequences is to establish a large group of sequences with good statistical properties. It is shown that this can be accomplished much more efficiently using the hybrid-sum approach rather than forming the group strictly from maximum length sequences.

Weathers, G. D.↗
NASA NTRS1973

Statistical properties of filtered pseudorandom digital sequences formed from the sum of maximum-length sequences

The statistics of filtered pseudorandom digital sequences called hybrid-sum sequences, formed from the modulo-two sum of several maximum-length sequences, are analyzed. The results indicate that a relation exists between the statistics of the filtered sequence and the characteristic polynomials of the component maximum length sequences. An analysis procedure is developed for identifying a large group of sequences with good statistical properties for applications requiring the generation of analog pseudorandom noise. By use of the analysis approach, the filtering process is approximated by the convolution of the sequence with a sum of unit step functions. A parameter reflecting the overall statistical properties of filtered pseudorandom sequences is derived. This parameter is called the statistical quality factor. A computer algorithm to calculate the statistical quality factor for the filtered sequences is presented, and the results for two examples of sequence combinations are included. The analysis reveals that the statistics of the signals generated with the hybrid-sum generator are potentially superior to the statistics of signals generated with maximum-length generators. Furthermore, fewer calculations are required to evaluate the statistics of a large group of hybrid-sum generators than are required to evaluate the statistics of the same size group of approximately equivalent maximum-length sequences.

Wallace, G. R.↗
NASA NTRS1973

Preemphasis for an S-band constant bandwidth FM/FM system.

Preemphasis schedules are given for 11 constant-bandwidth FM subcarriers modulating an S-band transmitter at various receiver SNRs (9 dB, 15 dB and 25 dB). The criterion for establishing these preemphasis curves is the achievement, at various receiver IF SNR, of equal receiver output SNR for all channels. The empirically derived results are compared with a simplified, analytically derived schedule and the primary differences are explained. The S-band preemphasis schedule is also found to differ from the lower frequency VHF case.

Wallace, G. R.↗
NASA NTRS1972

The pseudonoise test set: Communication system's performance evaluation based upon RMS error testing

A pseudonoise (PN) test set was built to provide a relatively easy means of accurately determining the end-to-end rms error introduced by a communication system when subjected to wideband data. It utilizes a filtered pseudorandom sequence generator as a wideband data source, providing a convenient means for digitally delaying the input reference signal for comparison with the distorted test communication system output. In addition to providing a means to measure the end-to-end rms error and the average delay of a communication system, the PN test set also provides a means to determine the tested system's impulse response and correlation function. The theory of PN testing is discussed in detail along with the most difficult aspects of implementation, the building of matched filter pairs. Both analytical and empirical results are reported which support the contentions that this is an accurate and practical way to acquire figures of merit for complete communication systems.

Wallace, G. R.↗
NASA NTRS1972

End-to-end RMS error testing on a constant bandwidth FM/FM system

End-to-end root-mean-square (rms) tests performed on a constant bandwidth FM/FM system with various settings of system parameters are reported. The testing technique employed is that of sampling, digitizing, delaying, and comparing the analog input against the sampled and digitized corresponding output. Total system error is determined by fully loading all channels with band-limited noise and conducting end-to-end rms error tests on one channel. Tests are also conducted with and without a transmission link and plots of rms errors versus receiver signal-to-noise (S/N) values are obtained. The combined effects of intermodulation, adjacent channel crosstalk, and residual system noise are determined as well as the single channel distortion of the system.

Wallace, G. R.↗
NASA NTRS1972

Pre-emphasis determination for an S-band constant bandwidth FM/FM station

Pre-emphasis schedules are given for 11 constant-bandwidth FM subcarriers modulating an S band transmitter at three receiver signal to noise ratios (i.e., 9, 15, and 25 dB). The criterion for establishing these pre-emphasis curves is the achievement, at various receiver intermediate frequency signal to noise ratios, of equal receiver output signal to noise ratios for all channels. It is realized that these curves may not be the optimum pre-emphasis curves based on overall efficiency or maximum utilization of the allotted spectrum, but they are near-optimum for data with channels which require equal output signal to noise ratios, such as spectral densities. The empirically derived results are compared with a simplified, analytically derived schedule and the primary differences are explained. The S band pre-emphasis schedule differs from the lower frequency VHF case. Since most proportional bandwidth and constant bandwidth systems use ground based recorders and some use flight recorders (as the Saturn systems did on VHF proportional bandwidth telemetry), the effects of these recorders are discussed and a modified pre-emphasis schedule is presented showing the results of this study phase.

Wallace, G. R.↗