Engineering Papers⌕ Search

Engineering topics

Walker, Eric A.

Publications and source records attributed to Walker, Eric A..

6 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Non-catalytic gas phase NO oxidation in the presence of decane

In this study, experiments without a catalyst revealed that NO was oxidized in a diesel exhaust gas phase mixture due to the presence of n -C 10 H 22 (decane). This reaction was observed to occur following the low temperature oxidation catalyst test protocol (LTC-D) defined by U.S. DRIVE. The purpose of LTC-D conditions is to simulate an aftertreatment diesel combustion gas mixture in order to test candidate catalyst materials. 100% NO conversion was observed, without a catalyst, after beginning to react at 330 °C accompanied by consumption of decane. After experiments that isolated hydrocarbons, ethylene was also observed to facilitate NO oxidation to a lesser degree (>470 °C). Density functional theory (DFT) calculations were conducted to investigate thermodynamically-possible initiating elementary steps during n -C 10 H 22 consumption and NO oxidation. Two feasible intermediate radicals to oxidize NO to NO 2 are ·C 10 H 21 O 2 and ·HO

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Mechanistic Understanding of Methane Combustion over Ni/CeO 2 : A Combined Experimental and Theoretical Approach

Catalytic oxidation of methane (CH 4 ) over nonprecious Ni/CeO 2 catalysts has received a lot of attention due to the large natural gas reserves found in North America and the prohibitive cost of palladium-based catalysts, commonly used for CH 4 oxidation. However, the catalytic mechanism of CH 4 oxidation over Ni/CeO 2 still remains unclear. Moreover, the parameters affecting the reaction rates, the interaction between nickel and CeO 2 , and the reaction intermediates are still not well understood. In this study, kinetic model fitting, CH 4 temperature-programmed reduction-mass spectroscopy (CH 4 TPR-MS), in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS), and density functional theory (DFT) calculations were combined to elucidate the mechanism of complete oxidation of CH 4 over Ni/CeO 2 . CH 4 TPR-MS showed that the complete oxidation of CH 4 over Ni/CeO 2 requires 55–120 °C lower compared to bare CeO 2 or Ni/quartz sand; complete oxidation of CH 4 took place when the surface oxygen species were abundant, while partial oxidation products (CO, H 2 ) were formed when the oxygen species were depleted. In situ DRIFTS showed that CH 3 , CH 2 , CO, and CO 2 were formed after CH 4 activation over Ni/CeO 2 , while CH 3 O species were not observed. Combining those findings with kinetic model fitting, a redox Mars–van Krevelen (MvK) mechanism showed the best description of the experimental observations. The MvK mechanism involves the reaction of dissociated oxygen species with gas-phase CH 4 while water inhibits the reaction rate by adsorbing on the oxidized sites. Moreover, CH 4 activation leads to the reduction of the active sites and oxygen vacancy formation followed by reoxidation of the active sites by gas-phase O 2 . A CH 4 oxidation reaction pathway over Ni/CeO 2 is proposed by DFT calculations. In summary, the findings shown here suggest that CH 4 oxidation over Ni/CeO 2 follows a redox MvK mechanism and provides guidance for the rational design of non-precious-metal catalysts for CH 4 oxidation reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

CheKiPEUQ Intro 1: Bayesian Parameter Estimation Considering Uncertainty or Error from both Experiments and Theory**

A common goal is extraction of physico-chemical parameter values such as pre-exponentials and activation energies from experiment. Ever increasing knowledge from experiments and computations is enabling semi-quantitative prior predictions of such values. When prior knowledge of physically realistic ranges is available, a method named Bayesian parameter estimation (BPE) enables more physically realistic parameter estimation relative to unsophisticated fitting by seeking the most probable value when considering together the uncertainties from prior knowledge, experimental data, and approximations in the model. An impediment to widespread use of BPE is a lack of understanding, training, and user-friendly software. Along with this invited publication, a general software package for BPE is being released that is user-friendly and that does not require understanding of the math behind the methodology. Overall, two previously unpublished catalysis science examples are provided along with considerations and guidelines for successful application of BPE. Following this work, BPE can become more widespread to enable extraction of physically meaningful parameter values.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

CheKiPEUQ Intro 2: Harnessing Uncertainties from Data Sets, Bayesian Design of Experiments in Chemical Kinetics**

When choosing experimental conditions, Bayesian statistical tools can predict the experimental choices which will yield the highest information gain. Experimental choices could be temperature, pressure, reaction time, number of measurements, reactor volume, etc.. Three example analyses are presented here, each using the software Chemical Kinetics Parameter Estimation and Uncertainty Quantification (CheKiPEUQ). Information gain is a measure of reduction of uncertainty in a model's parameters. The three chemical system examples presented each illustrate Bayesian Design of Experiments using information gain. In the first chemical example, temperature selection impacts the information gain for the free energy of reaction in a two-component equilibrium reaction. In the second example, temperature and pressure are explored for a competitive adsorption Langmuir replacement reaction system. Finally, the third example is a catalytic membrane reactor which is a culmination of the previous examples. The catalytic membrane reactor has a complex and nonlinear response in the observables which is solved by numerical evaluation. In the three examples, the experimental conditions are treated as design variables for maximizing information gain.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗