Engineering topics

Walker, Christopher K.

Publications and source records attributed to Walker, Christopher K..

11 records

NASA NTRS2014

10 meter Sub-Orbital Large Balloon Reflector (LBR)

The realization of a large, space-based 10 meter class telescope for far-infrared/THz studies has long been a goal of NASA. Such a telescope could study the origins of stars, planets, molecular clouds, and galaxies; providing a much needed means of following-up on tantalizing results from recent successful missions such as Spitzer, Herschel, and SOFIA. Indeed, Herschel began its life in the US space program as the Large Deployable Reflector (LDR) to be assembled in low Earth orbit by shuttle astronauts. Escalating costs and smaller federal budget allocations resulted in a downsizing of the mission. However, by combining successful suborbital balloon and ground-based telescope technologies, the dream of a 10 meter class telescope free of ~99% of the Earth's atmospheric absorption in the far-infrared can be realized. The same telescope can also be used to perform sensitive, high spectral and spatial resolution limb sounding studies of the Earth's atmosphere in greenhouse gases such as CO, ClO, O3, and water, as well as serve as a high flying hub for any number of telecommunications and surveillance activities. Flight times of 100+ days will be possible, with instruments having mass and power requirements in excess of ~500 kg and ~1 kW.Here we present the results of our NIAC Step 1, Phase B design study where each key aspect of the LBR concept is discussed and recommendations made for further study in Phase II.These aspects include realization of a large spherical reflecting surface, spherical corrector, pointing system, instrument module, and service module/gondola. Once each hardware component is introduced, a typical LBR Mission profile is described that enables the realization of a stratospheric 10 meter THz observatory and limb sounder. Verification of the design approach was achieved by using a combination of analytical modelling, lab testing of materials and techniques, and building a 3 meter rooftop LBR prototype.

Telescope↗

NASA NTRS2004

The Antarctic Planet Interferometer

The Antarctic Planet Interferometer is an instrument concept designed to detect and characterize extrasolar planets by exploiting the unique potential of the best accessible site on earth for thermal infrared interferometry. High-precision interferometric techniques under development for extrasolar planet detection and characterization (differential phase, nulling and astrometry) all benefit substantially from the slow, low-altitude turbulence, low water vapor content, and low temperature found on the Antarctic plateau. At the best of these locations, such as the Concordia base being developed at Dome C, an interferometer with two-meter diameter class apertures has the potential to deliver unique science for a variety of topics, including extrasolar planets, active galactic nuclei, young stellar objects, and protoplanetary disks.

interferometry↗

NASA NTRS1998

A 2 THz Heterodyne Array Receiver for SOFIA

We proposed to perform a comprehensive design study of a 16-element heterodyne array receiver for SOFIA. The array was designed to utilize hot-electron bolometers in an efficient, low-cost waveguide mount to achieve low noise performance between approx. 1500 and 2400 GHz. Due to the prevailing physical conditions in the interstellar medium, this frequency range is one of the richest in the FIR portion of the spectrum. An array designed for this wavelength range will make excellent use of the telescope and the available atmospheric transmission, and will provide a new perspective on stellar, chemical, and galaxy evolution in the present as well as past epochs. A few of the most important molecular and atomic species which the instrument will sample are CII, OI, CO, OH, NII, and CH. The system used the most sensitive detectors available in an efficient optical system. The local oscillator was a compact CO2 pumped far-infrared laser currently under development for SOFIA. The backend spectrometer was an array acousto-optic spectrometer (aAOS). The spectrometer utilizes proven hardware and technologies to provide broadband performance (greater than or equal to 1 GHz per AOS channel) and high spectral resolution (1 MHz) with the maximum sensitivity and minimum complexity and cost. The proposed instrument would be the fastest and most sensitive heterodyne receiver ever to operate in the 1.5 - 2.4 THz band. One of the key technologies developed for the proposed instrument is the laser micromachining of waveguide structures. These structures provide both the optical link between the instrument and the telescope (via an array of efficient feedhorns) and the impedance transformation between the detectors and free space. With the assistance of funds provided from this grant, we were able to fabricate and test the world's first laser micromachined feedhorns. Figure 1 is a photograph of the 2 THz double feedhorn structure designed and constructed under the auspices of this grant. The quality of the waveguide structure is far better than that obtainable using any other fabrication technique. Figure 2 is the beam pattern obtained from it. The beam parameters are an excellent match to what is expected from theory. The success of this experiment demonstrates the viability of using laser micromachined components in the development of high performance, large format array receivers. Figure 3 is an illustration of the focal plane array concept we developed lot- SOFIA base upon this work. Un- fortunately, our instrument proposal was not selected as a first generation SOFIA instrument. However, we have continued our development efforts and will propose to build a 2nd generation instrument based on the same design concepts. Our work under NAG 2-1057 was very rewarding and we appreciate the opportunity provided by NASA to pursue it. The research led directly to publishing 2 papers (listed below) and the award of an NSF grant to our group to construct a laser micromachining system on the University of Arizona campus.

Walker, Christopher K.↗

NASA NTRS1998

A 2 THz Heterodyne Array Receiver for SOFIA: Summary of Research

We proposed to perform a comprehensive design study of a 16-element heterodyne array receiver for SOFIA. The array was designed to utilize hot-electron bolometers in an efficient, low-cost waveguide mount to achieve low noise performance between approximately 1500 and 2400 GHz. Due to the prevailing physical conditions in the interstellar medium, this frequency range is one of the richest in the Far-Infra Red (FIR) portion of the spectrum. An array designed for this wavelength range will make excellent use of the telescope and the available atmospheric transmission, and will provide a new perspective on stellar, chemical, and galactic evolution in the present as well as past epochs. A few of the most important molecular and atomic species which the instrument will sample are CII, OI, CO, OH, NII, and CH. The system used the most sensitive detectors available in an efficient optical system. The local oscillator was a compact CO2 pumped far-infrared laser currently under development for SOFIA. The backend spectrometer was an array acousto-optic spectrometer (aAOS). The spectrometer utilizes proven hardware and technologies to provide broadband performance (> 1 GHz per AOS channel) and high spectral resolution (1 MHz) with the maximum sensitivity and minimum complexity and cost. The proposed instrument would be the fastest and most sensitive heterodyne receiver ever to operate in the 1.5 - 2.4 THz band. One of the key technologies developed for the proposed instrument is the laser micromachining of waveguide structures. These structures provide both the optical link between the instrument and the telescope (via an array of efficient feedhorns) and the impedance transformation between the detectors and free space. With the assistance of funds provided from this grant, we were able to fabricate and test the world's first laser micromachined feedhorns. The quality of the waveguide structure is far better than that obtainable using any other fabrication technique. The beam parameters are an excellent match to what is expected from theory. The success of this experiment demonstrates the viability of using laser micromachined components in the development of high performance, large format array receivers. We have continued our development efforts and will propose to build a 2nd generation instrument based on the same design concepts.

Walker, Christopher K.↗

NASA NTRS1996

A 2 THz Heterodyne Array Receiver for SOFIA

We proposed to perform a comprehensive design study of a 16-element heterodyne array receiver for SOFIA. The array was designed to utilize hot-electron bolometers in an efficient, low-cost waveguide mount to achieve low noise performance between approx. 1500 and 2400 GHz. Due to the prevailing physical conditions in the interstellar medium, this frequency range is one of the richest in the FIR portion of the spectrum. An array designed for this wavelength range will make excellent use of the telescope and the available atmospheric transmission, and will provide a new perspective on stellar, chemical, and galaxy evolution in the present as well as past epochs. A few of the most important molecular and atomic species which the instrument will sample are CII, OI, CO, OH, NII, and CH. The system used the most sensitive detectors available in an efficient optical system. The local oscillator was a compact CO2 pumped far-infrared laser currently under development for SOFIA. The backend spectrometer was an array acousto-optic spectrometer (aAOS). The spectrometer utilizes proven hardware and technologies to provide broadband performance (greater than or equal to 1 GHz per AOS channel) and high spectral resolution (1 MHz) with the maximum sensitivity and minimum complexity and cost. The proposed instrument would be the fastest and most sensitive heterodyne receiver ever to operate in the 1.5 - 2.4 THz band. One of the key technologies developed for the proposed instrument is the laser micromachining of waveguide structures. These structures provide both the optical link between the instrument and the telescope (via an array of efficient feedhorns) and the impedance transformation between the detectors and free space. With the assistance of funds provided from this grant, we were able to fabricate and test the world's first laser micromachined feedhorns. The quality of the waveguide structure is far better than that obtainable using any other fabrication technique. The beam parameters are an excellent match to what is expected from theory. The success of this experiment demonstrates the viability of using laser micromachined components in the development of high performance, large format array receivers. Unfortunately, our instrument proposal was not selected as a first generation SOFIA instrument. However, we have continued our development efforts and will propose to build a 2nd generation instrument based on the same design concepts.

Walker, Christopher K.↗

NASA NTRS1994

Vibrationally excited CS: A new probe of conditions in young protostellar systems

We present the first detection of vibrationally excited C(32)S J = 10-9 and J = 7-6 emission toward a young stellar object (YSO). Toward IRAS 16293-2422, the vibrationally excited C(32)S emission is redshifted approximately 3.9 km/s from the systemic velocity of the core. The emission must arise in warm (T greater than or approximately equal 1000 K), dense (n greater than or approximately equal to 10(exp 11)-10(exp 12) per cc) gas. The most plausible origin for the emission appears to be self-gravitating instabilities in a protostellar accretion disk, which produce waves and shocks.

Walker, Christopher K.↗

NASA NTRS1994

Micromachined Silicon Waveguides

Components that handle millimeter and submillimeter wavelengths fabricated conveniently. Micromachining rectangular waveguide involves standard steps of masking, etching, and deposition of metal on silicon. Parts made assembled into half-waveguide and finally into full waveguide. Silicon-micromachining approach enables simultaneous fabrication of several versions of waveguide, with variations in critical parameter, on single wafer of silicon. Performances of versions compared and optimized more quickly and at lower cost than is possible if different versions are fabricated sequentially, by conventional machining techniques.

Mcgrath, William R.↗

NASA NTRS1993

Detection of the Carbon Monoxide Ion (CO+) in the Interstellar Medium and a Planetary Nebula

We report detection of the carbon monoxide ion (CO+) in the interstellar medium (Ml7SW) and a planetary nebula (NGC 7027). These detections are based on observations of three millimeter and submillimeter transitions in M17SW and one in NGC 7027. Chemical models suggest that CO+ should be most abundant where complex molecules are least likely to be present. In our search for CO+ we therefore minimized the chance of confusion while maximizing the probability of detection by observing regions whose chemistry is dominated by the effects of ultraviolet radiation.

Latter, William B.↗

NASA NTRS1988

An unusual outflow around IRAS 16293-2422

The dense dusty molecular cloud core associated with the unusual protostellar source IRAS 16293-1422 (IRAS 1629A) was observed in the J = 2-1 transition of (C-12)O and (C-13)O. These observations indicate that IRAS 1629A is a source of an unusual high-velocity molecular outflow with four separate emission lobes. The morphology and velocity structure of the lobes may suggest the presence of a dual jet or double bipolar outflow system originating from the vicinity of IRAS 1269A. These observations resolve the outflowing gas into numerous high-velocity clumps which are either being continuously accelerated from low to high velocity along the entire length of the flow or are undergoing free-flow expansion.

Walker, Christopher K.↗

NASA NTRS1987

Observations of 1.3 millimeter continuum emission from the centers of galaxies

A search for 1.3 mm continuum emission from the centers of eight galaxies has been conducted, and three sources of emission, all apparently arising from cold dust, have been detected. The gas mass associated with this dust is calculated. A rough correlation found between the J = 1-0 CO emission and the millimeter continuum flux, as well as a fair agreement between the masses determined from the two types of observation, support the view that the cool dust is mixed with the molecular material in the program objects. Atomic hydrogen masses estimated for the same cources from 21 cm line observations show that there is little H I in the objects. Most of the objects form stars at about the same efficiency as does the Galaxy.

Thronson, Harley A., Jr.↗

NASA NTRS1986

Spectroscopic evidence for infall around an extraordinary IRAS source in Ophiuchus

Millimeter-wave continuum observations and spectral line observations of the J = 5-4 and J = 2-1 transitions of CS toward IRAS 16293-2422, an extremely cold infrared source associated with a high-velocity molecular outflow in the Rho Ophiuchi molecular cloud, are reported. The observations indicate that this source is a dust-enshrouded object embedded in a dense, elongated configuration of molecular gas whose major axis is roughly orthogonal to the direction of the double bipolar outflow observed in it. The observations appear to provide spectroscopic evidence for significant mass infall motions associated with a young stellar object, and suggest that IRAS 16293-2422 is a true protostar.

Walker, Christopher K.↗