Engineering topics

Walder, Brennan J.

Publications and source records attributed to Walder, Brennan J..

8 records

DOE OSTI2024

Natural carbonation of portland cement with synthetic zeolite Y as a supplementary cementitious material

Risks associated with carbonation are a key limitation to greater replacement levels of ordinary portland cement (OPC) by supplementary cementitious materials (SCMs). The addition of pozzolanic SCMs in OPC alters the hydrate assemblage by forming phases like calcium-(alumina)-silicate-hydrate (C-(A)-S-H). The objective of the present study was to elucidate how such changes in hydrate assemblage influence the chemical mechanisms of carbonation in a realistic OPC system. Here, in this paper, we show that synthetic zeolite Y (faujasite) is a highly reactive pozzolan in OPC that reduces the calcium content of hydration products via prompt consumption of calcium hydroxide from the evolving phase assemblage prior to CO 2 exposure. Suppression of portlandite at moderate to high zeolite Y content led to a more damaging mechanism of carbonation by disrupting the formation of a passivating carbonate layer. Without this layer, carbonation depth and CO 2 uptake are increased. Binders containing 12–18% zeolite Y by volume consumed all the calcium hydroxide from OPC during hydration and reduced the Ca/(Si+Al) ratio of the amorphous products to near 0.67. In these cases, higher carbonation depths were observed after exposure to ambient air with decalcification of C-(A)-S-H as the main source of CO 2 buffering. Binders with either 0% or 4% zeolite Y contained calcium hydroxide in the hydrated microstructure, had higher Ca/(Si+Al) ratios, and formed a calcite-rich passivation layer that halted deep carbonation. Although the carbonated layer in the samples with 12% and 18% zeolite Y contained 70% and 76% less calcite than the OPC respectively, their higher carbonation depths resulted in total CO 2 uptakes that were 12x greater than the OPC sample. Passivation layer formation in samples with calcium hydroxide explains this finding and was further supported by thermodynamic modeling. High Si/Al zeolite additives to OPC should be balanced with the calcium content for optimal carbonation resistance.

36 MATERIALS SCIENCE↗

DOE OSTI2023

Impact of Disorder and Defects on Bond Energies in Highly Fluorinated Graphene

Fluorinated graphite materials are of interest for an assortment of applications and can be synthesized under a variety of synthetic conditions from many different types of carbon. Due to such variations, structural disorders in the form of defects and polymorphism are often present. Here, we investigate the impact of local structural variations on the C–F bond dissociation energies (BDEs) in carbon-based fluoride materials using density functional theory (DFT) computational methods. Employing fluorographene (FG) cluster models, we determine the impact of different C–F bonding configurations in the core of each platelet on the equilibrium BDEs for each C–F bond. The introduction of structural disorder decreases the first C–F BDE by approximately 1 eV compared to the canonical arrangement of axial C–F bonds ordered as in a network of cyclohexane “chairs”. Variability of calculated BDEs among the different polymorphs decreases upon subsequent F removal. Common structural tendencies of the adiabatic defluorination pathways for each polymorph are identified. In conclusion, our analysis suggests that at F/C ratios near 1.0, disorder in the local structure can play a significant role in the energetics of the initial carbon fluoride defluorination and that the influence of this configurational disorder diminishes with decreasing F/C ratios.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2022

Surface Functionalized Barium Titanate Nanoparticles: A Combined Experimental and Computational Study

Barium titanate (BTO) nanoparticles show great potential for use in electrostatic capacitors with high energy density. This includes both polymer composite and sintered capacitors. However, questions about the nanoparticles' size distribution, amount of agglomeration, and surface ligand effect on performance properties remain. Reducing particle agglomeration is a crucial step to understanding the properties of nanoscale particles, as agglomeration has significant effects on the composite dielectric constant. BTO surface functionalization using phosphonic acids is known reduce BTO nanoparticle agglomeration. We explore solution synthesized 10 nm BTO particles with tert-butylphosphonic acid ligands. Recent methods to quantifying agglomeration using an epoxy matrix before imaging shows that tert-butylphosphonic acid ligands reduce BTO agglomeration by 33%. Thermometric, spectroscopic, and computational methods provide confirmation of ligand binding and provide evidence of multiple ligand binding modes on the BTO particle surface.

36 MATERIALS SCIENCE↗

DOE OSTI2022

Probe for operando in situ electrochemical nuclear magnetic resonance spectroscopy

Electrochemical devices with metal casings have been considered incompatible with nuclear magnetic resonance (NMR) spectroscopy because the oscillating magnetic fields (“rf fields”) responsible for excitation and detection of NMR active nuclei do not penetrate metals. According to the present invention, rf fields can still efficiently penetrate into nonmetallic layers of electrochemical cells (such as a coin cell battery configuration) provided the magnetic field is oriented tangentially to the electrochemical cell electrodes in a “skimming” orientation. As an example, noninvasive high field in situ 7Li and 19F NMR of an unmodified commercial off-the-shelf rechargeable coin cell was demonstrated using a traditional external NMR coil setup. The in operando NMR measurements revealed that irreversible physical changes accumulate at the anode during electrochemical cycling.

Sorte, Eric Glenn↗

DOE OSTI2021

NMR spectroscopy of coin cell batteries with metal casings

Battery cells with metal casings are commonly considered incompatible with nuclear magnetic resonance (NMR) spectroscopy because the oscillating radio-frequency magnetic fields (“rf fields”) responsible for excitation and detection of NMR active nuclei do not penetrate metals. Here, we show that rf fields can still efficiently penetrate nonmetallic layers of coin cells with metal casings provided “B 1 damming” configurations are avoided. With this understanding, we demonstrate noninvasive high-field in situ 7 Li and 19 F NMR of coin cells with metal casings using a traditional external NMR coil. This includes the first NMR measurements of an unmodified commercial off-the-shelf rechargeable battery in operando, from which we detect, resolve, and separate 7 Li NMR signals from elemental Li, anodic β-LiAl, and cathodic Li x MnO 2 compounds. Real-time changes of β-LiAl lithium diffusion rates and variable β-LiAl 7 Li NMR Knight shifts are observed and tied to electrochemically driven changes of the β-LiAl defect structure.

25 ENERGY STORAGE↗

DOE OSTI2021

Modes of Disorder in Poly(carbon monofluoride)

Poly(carbon monofluoride), or (CF) n , is a layered fluorinated graphite material consisting of nanosized platelets. In this work, we present experimental multidimensional solid-state NMR spectra of (CF)n, supported by density functional theory (DFT) calculations of NMR parameters, which overhauls our understanding of structure and bonding in the material by elucidating many ways in which disorder manifests. We observe strong 19 F NMR signals conventionally assigned to elongated or “semi-ionic” C–F bonds and find that these signals are in fact due to domains where the framework locally adopts boat-like cyclohexane conformations. We calculate that C–F bonds are weakened but are not elongated by this conformational disorder. Exchange NMR suggests that conformational disorder avoids platelet edges. We also use a new J-resolved NMR method for disordered solids which provides molecular-level resolution of highly fluorinated edge states. Strings of consecutive difluoromethylene groups at edges are relatively mobile. Topologically distinct edge features, including zigzag edges, crenellated edges, and coves are resolved in our samples by solid-state NMR. Disorder should be controllable in a manner dependent on synthesis, affording new opportunities for tuning the properties of graphite fluorides.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2021

Influence of Polymorphs and Local Defect Structures on NMR Parameters of Graphite Fluorides

In this study, the role of local molecular structure on calculated 13 C and 19 F NMR chemical shifts for graphite fluoride materials was explored by using gauge-including projector augmented wave (GIPAW) computational methods for different periodic crystal polymorphs and density functional theory (DFT) gauge-including atomic orbital (GIAO) computational methods for individual graphite fluoride platelets, i.e., fluorinated graphene (FG). The impact of stacking sequences, d -spacing, and ring conformations on fully fluorinated graphite fluoride structures was investigated. A range of different defects including Stone–Wales, F and C vacancies, void formation, and F inversion were also evaluated using FG structures. These calculations show that distinct chemical shift signatures exist for many of these polymorphs and defects, therefore providing a basis for spectral assignment and development of models describing the mean local CF structure in disordered graphite fluoride materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2020

Quantification of Uncoupled Spin Domains in Spin-Abundant Disordered Solids

Materials often contain minor heterogeneous phases that are difficult to characterize yet nonetheless significantly influence important properties. Here we describe a solid-state NMR strategy for quantifying minor heterogenous sample regions containing dilute, essentially uncoupled nuclei in materials where the remaining nuclei experience heteronuclear dipolar couplings. NMR signals from the coupled nuclei are dephased while NMR signals from the uncoupled nuclei can be amplified by one or two orders of magnitude using Carr-Meiboom-Purcell-Gill (CPMG) acquisition. The signal amplification by CPMG can be estimated allowing the concentration of the uncoupled spin regions to be determined even when direct observation of the uncoupled spin NMR signal in a single pulse experiment would require an impractically long duration of signal averaging. We use this method to quantify residual graphitic carbon using 13 C CPMG NMR in poly(carbon monofluoride) samples synthesized by direct fluorination of carbon from various sources. Our detection limit for graphitic carbon in these materials is better than 0.05 mol%. The accuracy of the method is discussed and comparisons to other methods are drawn.

36 MATERIALS SCIENCE↗