Engineering topics

Wada, B. K.

Publications and source records attributed to Wada, B. K..

At least 55 records · Page 3

NASA NTRS1986

Spacecraft load, design and test philosophies

The development of spacecraft loads, design and test philosophies at the Jet Propulsion Laboratory (JPL) during the past 25 years is presented. Examples from the JPL's Viking, Voyager and Galileo spacecraft are used to explain the changes in philosophy necessary to meet the program requirements with a reduction in cost and schedule. Approaches to validate mathematical models of large structures which can't be ground tested as an overall system because of size and/or adverse effects of terrestrial conditions such as gravity are presented.

Wada, B. K.↗

NASA NTRS1986

Multiple boundary condition test (MBCT) approach to update mathematical models of large flexible structures

A major challenge to the structural dynamicist is to validate mathematical models of large space structures which cannot be ground tested because of its size and/or flexibility. The paper presents a Multiple Boundary Condition Test (MBCT) approach which allows a systematic validation of the mathematical model by performing a number of ground tests on a large structure with variable boundary conditions. A numerical simulation is presented which illustrates the validity of the MBCT including some of the potential limitations.

Wada, B. K.↗

NASA NTRS1986

Multiple Boundary Condition Tests (MBCT) for verification of large space structures

The Multiple Boundary Condition Tests (MBCT) approach is evaluated and recent modifications are described. For the application of MBCT, 12 different boundary conditions are selected and the results of applying MBCT in conjunction with a nonlinear formulation are indicated schematically. It is concluded that the nonlinear formulation enhances the ability to implement the MBCT test approach on large space structures which cannot be ground tested without the artificial boundary conditions incorporated in MBCT. In addition, it leads to significant improvements in the convergence to the correct solution.

Wada, B. K.↗

NASA NTRS1986

Nonlinear sensitivity coefficients and corrections in system identification

The evaluation of sensitivity coefficients which are the changes in the eigencharacteristics with respect to changes in the structural parameters is important in the identification of structural systems. In such studies the commonly used linearized sensitivity coefficients for system identification have occasionally resulted in poor convergence or even divergence during the iteration process to update analytical models for better correlation with the test data. Nonlinear sensitivity coefficients and nonlinear correction terms, usually eliminated during the linearization process, have been developed to evaluate sensitivity coefficients of linear systems. Application to computer simulated example problems indicates a more rapid and stable convergence of the iteration processes to update the analytical model for the improvement of the correlation with test data. The successful application of combining the nonlinear sensitivity coefficients and nonlinear correction terms with the Multiple Boundary Condition Tests enhances the ability to validate large space structures by ground tests.

Kuo, C. P.↗

NASA NTRS1986

On control of stresses in silicon web growth

It has been observed that the residual stresses and dislocations during the silicon crystal growth for photovoltaic applications are caused by thermal stresses. The temperatures along the boundaries of the silicon crystal ribbon are prescribed to meet the requirements of the crystal growth. It is shown that by allowing the temperatures to satisfy a second-order partial differential equation in the ribbon, all thermal stresses, and others induced by them, may be eliminated for the stress-free growth of the silicon crystal.

Utku, S.↗

NASA NTRS1986

Validation of large space structures by ground tests

The paper presents concepts designed to validate, through the use of ground tests, mathematical models of continuous type structures and structures comprised of interconnecting subsystems. For continuous-type structures, a multiple boundary condition test approach is considered in which the basic idea is to perform a large number of tests using artificial boundary conditions from which good ground test data can be obtained. The test ensures an arbitrarily large number of test data for use in the validation and updating of the mathematical model. Another approach, applicable to structures comprised of subsystems, involves the identification of significant structural elements for the system dynamic model which are not validated by standard modal tests of the subsystems.

Wada, B. K.↗

NASA NTRS1985

Extension of ground-based testing for large space structures

A major concern for future large space structures is the ability to verify their dynamic characteristics by ground test. This article presents the results of the multiple boundary conditions test (MBCT) approach, which provides a complete ground test of a large structure that will provide, in turn, the data necessary to construct a test-verified final mathematical model. Theoretical studies indicate that this approach can provide a better final model than a ground test of the full-scale very flexible structure in a 1-g field. The approach is demonstrated by a mathematical simulation.

Wada, B. K.↗

NASA NTRS1985

Test and analysis correlation for structural dynamic systems

Activities in modifying a structural mathematical model to correlate with its modal test results are summarized. Results from the Viking and Galileo spacecraft, and developments in the parameter estimation of structural mathematical models of large flexible structures using multiple boundary condition tests are presented.

Wada, B. K.↗

NASA NTRS1985

Test and analysis correlation for structural dynamic systems

In this paper the authors summarize the activities at the Jet Propulsion Laboratory (JPL) in modifying the structural mathematical model to correlate with its modal test results. In addition to the results from the Viking and Galileo spacecrafts, developments in the parameter estimation of structural mathematical models of large flexible structures using Multiple Boundary Condition Tests (MBCT) are presented.

Wada, B. K.↗

NASA NTRS1984

A comparison of measured spacecraft modal damping values

The prediction and the measurement of modal damping values of spacecrafts for use in the determination of design loads were summarized. Realistic transient forcing functions were used. The solution of complex eigenvalue response solutions resulting from modal synthesis of subsystems in which each subsystem is assigned modal damping values is discussed. Damping data on both the Voyager and the Galileo spacecrafts using up to eight different types of techniques to analyze modal data are presented. It is concluded that it is difficult to estimate the true damping of a structure and the measured damping values which are dependent on the analysis method of the data.

Wada, B. K.↗

NASA NTRS1984

Silicon ribbon stress-strain activities

The finite element method is used to investigate stress/strain in silicon ribbon. Failure considerations such as residual stress, buckling material non-linearity and creep are discussed. Temperature profiles are presented.

Wada, B. K.↗

NASA NTRS1984

The 55-meter-structure flight experiment

The verification and demonstration of the structural performance related parameters for large flexible space structures are discussed. The objectives are to verify the deployment repeatability of static surface contour, to demonstrate the feasibility of in-flight static shape correction, to verify predicted shape in a zero gravity thermal environment, to determine zero gravity structural dynamic characteristics, and to verify the instrumentation and excitation system for in-flight measurements.

Garba, J. A.↗

NASA NTRS1983

Technology requirements for large flexible space structures

Research, test, and demonstration experiments necessary for establishing a data base that will permit construction of large, lightweight flexible space structures meeting on-orbit pointing and surface precesion criteria are discussed. Attention is focused on the wrap-rib proof-of-concept antenna structures developed from technology used on the ATS-6 satellite. The target structure will be up to 150 m in diameter or smaller, operate at RF levels, be amenable to packaging for carriage in the Shuttle bay, be capable of being ground-tested, and permit on-orbit deployment and retraction. Graphite/epoxy has been chosen as the antenna ribs material, and the antenna mesh will be gold-plated Mo wire. A 55-m diam reflector was built as proof-of-concept with ground-test capability. Tests will proceed on components, a model, the entire structure, and in-flight. An analytical model has been formulated to characterize the antenna's thermal behavior. The flight test of the 55-m prototype in-orbit offers the chance to validate the analytical model and characterize the control, mechanical, and thermal characteristics of the antenna configuration.

Wada, B. K.↗

NASA NTRS1983

Modal test and analysis correlation

Modal testing plays a significant role in experimentally measuring the modal parameters used directly for response analysis of spacecraft or indirectly to update a mathematical model for use in response analysis. Developments in modal testing and correlation of results to analytical models are discussed. Several procedures to semi-automate correlation of resonant frequency and mode shape test data to the model have been shown to be valid for hypothetical problems but have not been successful in practice. Improving the correlation of frequencies and mode shapes does not necessarily improve the correlation of modal force coefficients. The paper discusses other parameters, such as kinetic energy and strain energy, which may be more significant in the correlation process. Because the most demanding requirement of a modal test is in determining dynamic loads, the authors asssume that objective, minimally discussing theoretical developments, summarizing their results, and giving sample data.

Wada, B. K.↗

NASA NTRS1982

Required developments in structural dynamics

The finite element method, modal component synthesis, and the use of fast Fourier transformation were key developments in structural dynamics in the past 15 to 20 years. Current areas requiring additional effort include: (1) the correct calculation of modal shape and natural frequencies for complex structures; (2) the correlation of math models with test data; (3) the establishment of a criteria for "goodness" of the correlation between analysis and test; (4) the selection of the correct displacement functions when using computer programs for modal synthesis; (5) accuracy of response calculations; and (6) the inverse problem of determining the force problem from the response data. Trends identified include the use of distributed computing, greater reliance on analysis, and the possible use of artificial intelligence techniques, or some way of feeding back information, to provide solution guidance to engineers.

Wada, B. K.↗

NASA NTRS1982

Structural load prediction methods for space payloads

The state of the art in structural loads prediction procedures for spacecraft is summarized. Three categories of prediction techniques delineated by cost, complexity, comprehensiveness, accuracy, and applications are outlined. The lowest cost method has been used for earth resources, communications, and weather satellites, the medium cost method for sun-synchronous orbits and the large space telescope, and the most expensive for planetary missions, comet rendezvous, and out-of-ecliptic orbits, all assuming Shuttle launch. The lowest cost method involves a mass-acceleration curve. A shock spectra technique predicts a least upper bound for loads. A recovered transient method analyzes the interface acceleration of two connected launch vehicles. The most accurate method devised thus far is a transient analysis of the total launch vehicle/payload dynamic system.

Wada, B. K.↗

NASA NTRS1982

Development of the structural technology of a large deployable antenna

The current NASA-sponsored Antenna Technology Development Program of the offset wrap-rib antenna concept is based on a ground test program of 'proof of concept' hardware whose potential on-orbit performance is based on analytical estimates. The ground demonstration hardware represents a partial 55-meter diameter reflector and feed support structure. Testing will include automated deployment, reflector surface quality evaluation and validation of analytical performance models. Test results and hardware fabrication costs will be used to refine the models that will be the basis for the preliminary design of a 100-meter diameter wrap-rib antenna system. Additionally, the design, processes, tooling, fabrication techniques, fixturing and assembly approaches used for the 'proof of concept' hardware are directly applicable to building flight systems up to 100 meters in diameter.

Wada, B. K.↗

NASA NTRS1979

Spacecraft damping considerations in structural design

The role of damping in the prediction of spacecraft structural responses and loads, and in the structural design of spacecrafts is discussed. The methods used to incorporate damping in the structural analysis are summarized and some experiences and procedures relating to damping in recent spacecraft design are discussed. Methods for modal testing and the experimental determination of damping, the use of discrete dampers, and the estimation of payload response are studied. A collection of damping data for recent spacecraft and related hardware is provided in the appendix.

Wada, B. K.↗