Engineering Papers⌕ Search

Engineering topics

W Kyle Anderson

Publications and source records attributed to W Kyle Anderson.

16 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2020

Flutter Analysis with Stabilized Finite Elements Based on the Linearized Frequency-Domain Approach

When designing and certifying aircraft, engineers must take into consideration aeroelastic effects such as flutter. Design and certification of a vehicle may require analysis of thousands of aeroelastic responses. Standard tools in the aerospace industry are based on linear aerodynamic models such as the doublet-lattice method, but these methods can be nonconservative in certain situations such as in the transonic regime. While computational fluid dynamics (CFD) is a higher fidelity alternative, the time-marching approach has a drastically increased computational cost compared to the linear aerodynamic methods. By taking advantage of the periodic nature of flutter, frequency-domain methods offer a more efficient alternative to time-marching CFD. In this work, a linearized frequency-domain method is implemented and verified in the stabilized finite-element solver in FUN3D. The linearized frequency-domain method is demonstrated and compared to other methods for traditional benchmark cases for computational aeroelasticity: the AGARD 445.6 wing, the Benchmark Supercritical Wing, and the Benchmark NACA 0012Wing.

Kevin E Jacobson↗
NASA NTRSDate not supplied

Exploring Unstructured Mesh Adaptation for Hybrid Reynolds-Averaged Navier–Stokes/Large Eddy Simulation

Mesh adaptation methods for the Reynolds-averaged Navier–Stokes (RANS) equations are rapidly maturing and beginning to impact the design of aerospace vehicles. RANS turbulence modeling improvements have slowed and may stagnate. Wall-modeled large eddy simulation (LES) and hybrid RANS/LES (HRLES) may provide an improved modeling capability but require specialized expertise to construct appropriate meshes and are considered be too ex-pensive for routine practical use. The realization of the CFD Vision 2030 Study includes improving geometry linkage, mesh generation/adaptation, and turbulence modeling/resolving methods for automated management of errors and uncertainties of physics-based, predictive modeling that can set the stage for ensuring a vehicle is in compliance with a regulation or specification (i.e., certification or qualification by analysis). An exploration of mesh adaptation for HRLES is performed to document synergies and challenges between mesh adaptation and HRLES. Vortex breakdown over a delta wing is examined to show the improvement of HRLES over RANS turbulence modeling approaches. A high lift configuration is shown to demonstrate complex geometry capability. Research and development opportunities are identified to advocate for continuing investments that may allow HRLES to enter routine practical use as a tool for aerospace vehicle analysis and design.

Michael A Park↗
NASA NTRSDate not supplied

Verification of Anisotropic Mesh Adaptation for Complex Aerospace Applications

The stabilized finite element solver, FUN3D-SFE, along with the grid mechanics package refine are verified for aerospace applications of laminar and turbulent flow simulations. The current verification exercise represents an extension of previous research using FUN3D-SFEwith adjoint-based mesh adaptation to generate highly anisotropic adapted meshes for inviscid problems. Adaptations are performed using a solution-based approach that controls the Lpnorm of Mach number interpolation error and an adjoint-based approach that controls the error in some output functional. Adaptive results are shown for laminar subsonic flow over a delta wing, laminar subsonic flow over ONERA M6 wing, inviscid supersonic flow over a sonic boom test case, and a turbulent flow over a high lift configuration (JAXA Standard Model). Mesh convergence results are also compared with results from FUN3D-FV (Finite Volume) whenever available. For all test cases considered, FUN3D-SFE gives significantly better accurate results than FUN3D-FV on coarse meshes.

Aravind Balan↗
NASA NTRSDate not supplied

Sparse Linear Algebra Toolkit for Computational Aerodynamics

Finding solutions to sparse linear systems of equations is an essential step in Computational Engineering applications of interest to NASA. Linear systems of equations are composed and solved in almost every computational engineering application. The characteristics of linear systems vary greatly from one application to another. Accordingly, there are a wide variety of methods for the solution of linear systems of equations. The operations and methods prepared by the authors are focused on linear systems of interest to NASA, primarily those associated with Computational Fluid Dynamics (CFD), Aeroelasticity, and Aeroacoustics. The Sparse Linear Algebra Toolkit (SLAT) is a coordinated collection of software featuring operations, methods, and data structures that are useful when solving sparse linear systems of equations on modern computer architectures. The implemented operations and methods are designed and tuned for parallelism in shared memory, in distributed memory, and across the hybrid combination of distributed-shared memory. The toolkit includes novel methods and implementations for modern architectures and facilitates development of new approaches for meeting NASA’s evolving computational engineering challenges using evolving computer architectures that are not available in vendor libraries. In this paper, significant features and interfaces within SLAT are presented and verified for simulations performed with NASA’s CFD solver, FUN3D. The runtime and scaling performance of the Generalized Minimum Residual (GMRES) method implemented in SLAT is analyzed for the linear subproblems within the solution of turbulent Navier-Stokes equations employed in the simulation of high-lift configurations. Prior to this work, the SPARSKIT GMRES implementation was the only Krylov subspace method available within FUN3D. A strong scaling study shows the SLAT GMRES implementation facilitates accurate Reynolds-averaged Navier-Stokes CFD solutions between 15% and 56% faster than the SPARSKIT GMRES implementation.

Stephen L Wood↗
NASA NTRSDate not supplied

Adjoint-based Sensitivities of Flutter Predictions based on the Linearized Frequency-domain Approach

Flutter is a critical factor in designing and certifying aircraft. The linearized frequency-domain method offers a lower cost alternative to time-marching computational fluid dynamics for high-fidelity flutter analysis. In this work, adjoint-based sensitivities are added to a flutter analysis based on the linearized frequency-domain method to efficiently compute derivatives of flutter cost functions with respect to design variables or uncertain parameters. The derivation of the adjoint equations, which involve complications such as derivatives of a nonlinear generalized eigenvalue problem with complex-valued inputs and derivatives of the linearized Navier-Stokes equations, is provided. The implemented adjoint terms and derivatives are verified before demonstrating the approach for derivatives of flutter dynamic pressure with respect to Mach number for the AGARD 445.6 wing.

Aeroelasticity↗
NASA NTRSDate not supplied

Angle-of-Attack Sweep with Mesh Adaptation for High-Lift Configurations

This paper reports an angle-of-attack (alpha) sweep study with mesh adaptation for the high-lift configuration - JAXA Standard Model (JSM) from the 3rd AIAA High-Lift Prediction Workshop. The method of angle-of-attack (alpha) continuation, where the flow-field at a certain angle of attack is initialized from the solution obtained at the previous angle of attack, is applied to adapted unstructured meshes. Since the meshes are continuously adapted, flow-field initialization on a particular mesh for a certain angle is done through linear interpolation of the solution from the previous mesh. Interpolated initial conditions usually prevent massively separated solutions that may otherwise occur with impulsive initial conditions. Alpha continuations are done in both forward (increasing alpha) and reverse (decreasing alpha) directions, resulting in the formation of hysteresis loops. Skin frictions are compared with the wind-tunnel oil flow images and pressure coefficients are compared with the wind-tunnel values, at selected angles of attack. Final paper will include results also for the high-lift version of the Common Research Model (CRM-HL) from the 4th AIAA High-Lift Prediction Workshop. A thorough comparison of the results will also be made with the available wind-tunnel data.

Mesh Adaptation↗
NASA NTRSDate not supplied

Wall-Modeled Large-Eddy Simulations for High-Lift Configurations using FUN3D

Wall-modeled large-eddy simulation (WMLES) capability has recently been implemented into FUN3D, an unstructured, node-centered, finite-volume solver developed at the NASA Langley Research Center. In this paper, WMLES is assessed for two configurations that are representative for high-lift applications. The first configuration is a nominal two-dimensional multielement airfoil that has been extensively studied in the literature. WMLES solutions are computed for four angles of attack and compared with previously reported solutions. Good agreement of integrated forces, surface pressures, and boundary-layer velocity profiles is shown with available experimental data especially at lower angles of attack. WMLES solutions are also computed for the NASA High-Lift Common Research Model over a large range of angles of attack. Forces, pitching moments, and pressure distributions are favorably compared with the experimental data up to the maximum lift, including the angle of attack where the maximum lift is obtained experimentally. Eddy visualization techniques of q-criterion and density-gradient magnitude illustrate the resolved content.

High-Lift flows↗
NASA NTRSDate not supplied

Wall-Modeled Large Eddy Simulation Method for Unstructured-Grid Navier-Stokes Solvers

This paper reports on the implementation and assessment of a Wall-Modeled Large-Eddy Simulation (WMLES) methodology in an unstructured-grid, node-centered flow solver, FUN3D that is developed and supported at the NASA Langley Research Center. Finite-volume (FV) and finite-element (FE) discretization schemes considered in the study provide formal second-order spatial accuracy. Large-Eddy Simulations (LES) resolve large-scale turbulent-flow features and filter out small-scale effects using the Vreman subgrid-scale model. At solid-wall boundaries, a shear-stress model is employed to provide a proper boundary-flux closure. The nonlinear equations are integrated in time using either an optimized backward difference formula or an implicit multistage Runge-Kutta temporal scheme. The implicit equations at each time step are solved by strong nonlinear iteration schemes. WMLES demonstrations are shown for two high-lift configurations, namely, the McDonnell Douglas 30P30N multielement airfoil and a NASA High-Lift Common Research Model. Results show that the WMLES approaches implemented in the FV and FE discretization methods produce consistent solutions and are capable of capturing key aerodynamic characteristics and flow structures for high-lift configurations at a wide range of angles of attack including maximum-lift conditions. In the 30P30N example, correct trends in the variations of integrated aerodynamic forces and moments, surface pressure distributions, and boundary-layer profiles are captured as the Reynolds number is increased.

CFD; turbulence modeling; High-Lift flow simulatio↗
NASA NTRSDate not supplied

Assessment of UMUSCL Scheme for DNS of Turbulent Flows

Direct Numerical Simulations (DNS) are performed using the FUN3D code ( https://fun3d.larc.nasa.gov) for three validation cases: (1) flow through a plane channel, (2) flow through a channel with a constriction, and (3) flow over a flat plate. FUN3D is a node-centered finite-volume code developed at the NASA Langley Research Center that solves the three-dimensional compressible Navier-Stokes equations on unstructured computational grids. The simulations are performed employing the 2nd-order unstructured monotonic upstream scheme for conservation laws (UMUSCL). The results are compared with available experimental and numerical data. The effect of the UMUSCL reconstruction parameter (κ) is assessed, and the results indicate that κ = 0.9 yields satisfactory results in terms of accuracy and robustness compared to available data. Further analyses of the results, along with additional test cases and grids will be presented in the final manuscript.

Direct Numerical Simulation↗
NASA NTRSDate not supplied

Large-Scale Computational Fluid Dynamics Simulations of Aerospace Configurations on the Frontier Exascale System

Over the past fifteen years, the high performance computing landscape has undergone a seismic shift in both hardware and software paradigms, which has been necessary to realize a 1000× leap in computational performance while meeting stringent constraints on power consumption. A historical overview of a long-term research effort aimed at addressing these challenges within the context of a commonly-used aerospace computational fluid dynamics (CFD) application is presented. Details of the current implementation as they relate to the new era of exascale-relevant hardware architectures and programming models are described. Two large-scale simulations of aerospace configurations are performed using the entire Frontier exascale system, currently ranked as the most powerful supercomputing system in the world. The effort serves to address a 2024 milestone posed a decade ago by the seminal CFD Vision 2030 Study.

Eric J Nielsen↗
NASA NTRSDate not supplied

WMLES for the Fifth High-Lift PredictionWorkshop Cases Using FUN3D

This paper presents solution assessments and grid convergence studies for the test cases outlined in the Fifth High-Lift Prediction Workshop (HLPW-5), focusing on the high-lift Common Research Models (CRM-HL). The study utilizes a wall-modeled large-eddy simulation (WMLES) methodology developed in the unstructured-grid, node-centered flow solver FUN3D. The second-order accurate simulations conducted in this study utilize a finite-volume spatial discretization and an implicit temporal scheme. Large-scale turbulent features are resolved away from the wall, with small-scale effects captured by the Vreman subgrid-scale model. An equilibrium wall function uses the first grid point off the wall serving as the critical interface between the wall model and the large-eddy simulation region, thus requiring careful placement in grid design. WMLES solutions are assessed for HLPW-5 cases, including a clean wing-body configuration and geometry-buildup configurations corresponding to the 5.1\% ONERA CRM-HL model. Grid-convergence studies are systematically conducted using uniformly refined grids. Moreover, simulation results and grid sensitivity are presented for the NASA 5.2\% CRM-HL configuration at both moderate and flight-scale Reynolds numbers. Overall, WMLES results are satisfactory and agree well with available experimental data, especially on sufficiently fine grids.

high-lift aerodynamics↗