Engineering topics

Vonglahn, U. H.

Publications and source records attributed to Vonglahn, U. H..

At least 19 records

NASA NTRS1989

Rectangular nozzle plume velocity modeling for use in jet noise prediction

A modeling technique for predicting the axial and transverse velocity characteristics of rectangular nozzle plumes is developed. In this technique, modeling of the plume cross section is initiated at the nozzle exit plane. The technique is demonstrated for the plume issuing from a rectangular nozzle having an aspect ratio of 6.0 and discharging into quiescent air. Application of the present procedures to a nozzle discharging into a moving airstream (flight effect) are then demonstrated. The effects of plume shear layer structure modification on the velocity flowfield are discussed and modeling procedures are illustrated by example.

Vonglahn, U. H.↗

NASA NTRS1986

Plume characteristics of single-stream and dual-flow conventional and inverted-profile nozzles at equal thrust

The plume velocity and temperature decay rates of single-stream, conventional dual-flow and inverted-profile dual-flow nozzles are compared at equal values of ideal thrust over a wide range of flow conditions. The comparisons are made in terms of constant velocity and temperature contour maps. The results show that both dual-flow nozzle types have much greater plume velocity and temperature decay rates than those of equivalent thrust single-stream nozzles when the respective secondary flows were at ambient temperature. With hot secondary flows, the inverted-profile dual-flow plumes decayed significantly faster than those of single-stream nozzles; however, the decay rates for the conventional dual-flow streams were about the same as those for the single-stream nozzles. Consequently, with hot secondary flows, the inverted-profile dual-flow plumes decayed much faster than the conventional dual-flow plumes at equal thrust.

Vonglahn, U. H.↗

NASA NTRS1985

Preliminary analysis of tone-excited two-stream jet velocity decay

Acoustic research related to jet flows has established that sound, by amplifying the naturally occuring large-scale structures in turbulent shear layers, can cause a more rapidly decay of the jet plume velocity and temperature and an increase in jet spreading rate. One possible application of this sound-flow interaction phenomenon is to future STOL aircraft that may require modified jet plume characteristics in order to reduce the loads and temperatures on the deflected flaps during take-off and landing operations. The tone-excitation effect on the velocity decay of model-scale, two-stream jet plumes is analyzed. Measured data are correlated in terms of parameters that include excitation sound level and outer-to-inner stream velocity ratio. The effect of plume tone-excitation on far-field jet noise is examined and its implication for large-scale two-stream jets is discussed.

Vonglahn, U. H.↗

NASA NTRS1984

Velocity and temperature characteristics of two-stream, coplanar jet exhaust plumes

The subsonic jet exhaust velocity and temperature characteristics of model scale, two stream coplanar nozzles were obtained experimentally. The data obtained included the effects of fan to primary stream velocity and temperature ratios on the jet axial and radial flow characteristics. Empirical parameters were developed to correlate the measured data. The resultant equations were shown to be extensions of a previously published single stream jet velocity and temperature correlation.

Vonglahn, U. H.↗

NASA NTRS1983

On some flow characteristics of conventional and excited jets

Improved correlations of jet centerline velocity and static temperature decay data for convergent nozzles are developed. From these empirical correlations, a relationship was devised by which the static temperature decay for a nonisothermal jet plume can be determined from cold-flow jet centerline velocity decay data or prediction. This relationship is shown to apply as well to jet plumes for various nozzle shapes. It is assumed, by analogy, that this relationship also applies to acoustically excited jet plumes. Jet plume spreading with and without excitation is discussed. Finally, the radial velocity and temperature profiles for conventional and enhanced mixing jet flows are shown and their implication for excited flows is discussed.

Vonglahn, U. H.↗

NASA NTRS1982

Helicopter engine core noise

Calculated engine core noise levels, based on NASA Lewis prediction procedures, for five representative helicopter engines are compared with measured total helicopter noise levels and ICAO helicopter noise certification requirements. Comparisons are made for level flyover and approach procedures. The measured noise levels are generally significantly greater than those predicted for the core noise levels, except for the Sikorsky S-61 and S-64 helicopters. However, the predicted engine core noise levels are generally at or within 3 dB of the ICAO noise rules. Consequently, helicopter engine core noise can be a significant contributor to the overall helicopter noise signature.

Vonglahn, U. H.↗

NASA NTRS1982

Correlation of flight effects on centerline velocity decay for cold-flow acoustically excited jets

Acoustic excitation can influence the large scale shear layer structure of jet flow, thereby causing the jet centerline velocity to decay more rapidly. this phenomena has numerous practical applications, such as the reduction of jet/flap impingement velocity in order to reduce flap structural loads for under-the-wing STOL aircraft concepts. Cold flow centerline velocity decay data obtained with acoustic excitation of the jet exhaust flow are correlated with and without flight effects. Initially, static data are correlated in terms of an acoustic parameter involving the threshold sound level needed to initiate acoustic excitation of the jet plume. It is shown that for a given flight speed, the same acoustic excitation parameter as that developed for the static condition is valid. Finally, an aerodynamic flight effects parameter is included to correlate the static and flight centerline velocity decay data with and without acoustic excitation.

Vonglahn, U. H.↗

NASA NTRS1981

Comparison of predicted engine core noise with current and proposed aircraft noise certification requirements

Predicted engine core noise levels are compared with measured total aircraft noise levels and with current and proposed federal noise certification requirements. Comparisons are made at the FAR-36 measuring stations and include consideration of both full- and cutback-power operation at takeoff. In general, core noise provides a barrier to achieving proposed EPA stage 5 noise levels for all types of aircraft. More specifically, core noise levels will limit further reductions in aircraft noise levels for current widebody commercial aircraft.

Vonglahn, U. H.↗

NASA NTRS1978

Correlation of combustor acoustic power levels inferred from internal fluctuating pressure measurements

Combustion chamber acoustic power levels inferred from internal fluctuating pressure measurements are correlated with operating conditions and chamber geometries over a wide range. The variables include considerations of chamber design (can, annular, and reverse-flow annular) and size, number of fuel nozzles, burner staging and fuel split, airflow and heat release rates, and chamber inlet pressure and temperature levels. The correlated data include those obtained with combustion component development rigs as well as engines.

Vonglahn, U. H.↗

NASA NTRS1977

Interim noise correlation for some OTW configurations using external jet-flow deflectors

Jet flap interaction acoustic data obtained statically from a model-scale study of STOL-OTW configurations with a conical nozzle mounted above the wing and using various external deflectors to provide jet-flow attachment are correlated. The acoustic data are correlated in terms that consider the jet/flap interaction noise contributions associated primarily with fluctuating lift, trailing edge, and configuration wake noise sources. Variables considered include deflector geometry, flap setting and wing size. Finally, the configuration overall noise levels are related to static lift and thrust measurements in order to provide insight into possible acoustic/aerodynamic performance trade-off benefits.

Vonglahn, U. H.↗

NASA NTRS1977

Comparison of jet Mach number decay data with a correlation and jet spreading contours for a large variety of nozzles

Small-scale circular, noncircular, single- and multi-element nozzles with flow areas as large as 122 sq cm were tested with cold airflow at exit Mach numbers from 0.28 to 1.15. The effects of multi-element nozzle shape and element spacing on jet Mach number decay were studied in an effort to reduce the noise caused by jet impingement on externally blown flap (EBF) STOL aircraft. The jet Mach number decay data are well represented by empirical relations. Jet spreading and Mach number decay contours are presented for all configurations tested.

Groesbeck, D. E.↗

NASA NTRS1977

Noise of deflectors used for flow attachment with STOL-OTW configurations

Future STOL aircraft may utilize engine-over-the-wing installations in which the exhaust nozzles are located above and separated from the upper surface of the wing. An external jet flow deflector can be used with such installations to provide flow attachment to the wing/flap surfaces for lift augmentation. Deflector noise in the flyover plane measured with several model-scale nozzle/deflector/wing configurations is examined. The deflector-associated noise is correlated in terms of velocity and geometry parameters. The data also indicate that the effective overall sound pressure level of the deflector-associated noise peaks in the forward quadrant near 40 deg from the inlet axis.

Vonglahn, U. H.↗

NASA NTRS1976

OTW noise correlation for several nozzle/wing geometries using a 5:1 slot nozzle with external deflectors

Acoustic spectral data obtained from a model-scale study of several over the wing (OTW) configurations with a 5:1 slot nozzle using various external deflectors are correlated in terms of deflector geometry and flow parameters. Variations in the deflector geometry include deflector size and deflector angle. In addition, geometry variations in flap setting and nozzle chordwise location are included. Three dominant noise sources are correlated: fluctuating lift noise, flap trailing edge noise, and jet mixing noise. Aerodynamic characteristics including lift and thrust measurements, obtained for the various configurations are summarized.

Vonglahn, U. H.↗

NASA NTRS1973

Velocity decay and acoustic characteristics of various nozzle geometries with forward velocity

Utilizing a static test stand, 6- by 9-foot wind tunnel and 13-inch circular free jet, aerodynamic and acoustic data were obtained with a convergent circular nozzle, bypass nozzle, 6-tube mixer nozzle, and velocity decay surveys with and without forward velocity. The acoustic data include total sound power, directivity and frequency spectra obtained statically and with forward velocity. The relation of aerodynamic and acoustic measurements statically and in forward flight for the various nozzle configurations are discussed.

Vonglahn, U. H.↗

NASA NTRS1973

Forward velocity effects on jet noise with dominant internal noise source

Acoustic data, with and without forward velocity, were obtained with a circular nozzle using a quiet flow system and one dominated by a low frequency internal noise source (analogous to combustion noise). Forward velocity effects were obtained by installing the test nozzle in a free jet. Farfield noise data were obtained at jet pressure ratios from 1.3 to 1.7 and forward velocities up to 260 ft/sec. With a quiet flow system, jet noise is reduced by forward velocity. With a dominant low frequency core noise source, the portion of the noise spectra dominated by this source was not appreciably affected by forward velocity.

Vonglahn, U. H.↗

NASA NTRS1973

Nozzle geometry and forward velocity effects on noise for CTOL engine-over-the-wing concept

Acoustic shielding benefits for jet noise of engine-over-the-wing for conventional aircraft (CTOL) application were studied with and without forward velocity for various small-scale nozzles. These latter included convergent, bypass and mixer, with and without forward ejector, nozzles. A 13-inch free jet was used to provide forward velocity. Farfield noise data were obtained for subsonic jet velocities from 650 to 980 ft/sec and forward velocities from zero to 360 ft/sec. The studies showed that although shielding benefits were obtained with all nozzles, the greatest benefits were obtained with mixer nozzles. The absolute magnitude of the jet noise shielding benefits with forward velocity was similar to the variation in nozzle-only noise with forward velocity.

Vonglahn, U. H.↗

NASA NTRS1972

Forward flight effects on mixer nozzle design and noise considerations for STOL externally blown flap systems.

Experimental data of the peak axial-velocity decay in a moving airstream are presented for several types of nozzles. The nozzles include a six-tube mixer nozzle of a type considered for reduction of jet-flap interaction noise for externally-blown-flap STOL aircraft. The effect of secondary flow on the core flow velocity decay of a bypass nozzle is also discussed. Tentative correlation equations are suggested for the configurations evaluated. Recommendations for minimizing forward velocity effects on velocity decay and jet-flap interaction noise are made.

Vonglahn, U. H.↗

NASA NTRS1972

Peak axial-velocity decay with multi-element rectangular and triangular nozzles

The aircraft noise created by the impingement of engine exhaust jet of STOL aircraft with externally blown flaps is discussed. It was determined that the jet-flap interaction noise can be lowered by reducing the impinging velocity of the jet. The reduction must occur at a specific distance from the flap to be effective. The peak axial-velocity decay obtained with rectangular and triangular single element mixer nozzles is presented. Equations are developed for estimating the peak axial velocity decay curves for a wide range of nozzle configurations.

Groesbeck, D. E.↗