Engineering Papers⌕ Search

Engineering topics

Visentine, J. T.

Publications and source records attributed to Visentine, J. T..

15 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1987

Mass spectrometers and atomic oxygen

The likely role of atmospheric atomic oxygen in the recession of spacecraft surfaces and in the shuttle glow has revived interest in the accurate measurement of atomic oxygen densities in the upper atmosphere. The Air Force Geophysics Laboratory is supplying a quadrupole mass spectrometer for a materials interactions flight experiment being planned by the Johnson Space Center. The mass spectrometer will measure the flux of oxygen on test materials and will also identify the products of surface reactions. The instrument will be calibrated at a new facility for producing high energy beams of atomic oxygen at the Los Alamos National Laboratory. The plans for these calibration experiments are summarized.

Hunton, D. E.↗
NASA NTRS1987

The definition of the low earth orbital environment and its effect on thermal control materials

The LEO environment and its effects on thermal-control materials (TCMs) being evaluated for use in long-term-mission space structures such as the Space Station are characterized, summarizing the results of recent space and laboratory experiments. Factors examined include atomic oxygen (a serious problem out to 600-700 km), ionizing radiation, solar UV radiation, solid particles (manmade debris and micrometeoroids, a significant hazard out to about 1000 km), and synergistic effects. Numerical data on the expected intensity of these effects for the different Space Station components, the resistance of specific TCMs to the effects, and the effectiveness of protective coatings are compiled in extensive tables and illustrated with diagrams, graphs, and micrographs.

Durcanin, J. T.↗
NASA NTRS1986

Protecting spacecraft from atomic oxygen

Findings are reported from Space Shuttle flights STS-3, 4, 5, and 8 regarding the degradation of materials exposed to atomic oxygen in low earth orbit. Atomic oxygen, a strong oxidizing agent, is present in low concentrations at such altitudes, and a spacecraft can sweep up considerable volumes of it at orbital velocities of 5 miles/s, especially if mission lifetimes are measured in years or decades. Material loss has been found to be a function of the fluence (the number of oxygen atoms striking a unit area of surface over a given period); fluence is proportional to atmospheric density, orbital velocity, surface attitude relative to velocity vector, and duration of exposure. Atmospheric density depends first on altitude and second on the phase of the 11-year solar activity cycle. Metals, in the experiments, reacted less than nonmetals. Graphs and a table are included, permitting calculation of how far a surface of various organic materials will recede on a spacecraft in low earth orbit. The limited data base on atomic oxygen interactions with materials, using both Shuttle flight experiments and ground-based facilities must be augmented. Space Station design is imminent, and the understanding of such interactions is critical to the success of that design.

Leger, L. J.↗
NASA NTRS1986

Quadrupole mass spectrometer for Space Shuttle applications - Flight capabilities and ground calibration

The AFGL Quadrupole Ion/Neutral Mass Spectrometer (QINMS), its flight capabilities, and a few examples of QINMS data from the STS-4 flight are discussed in addition to the beam facility and calibration procedures used at the Los Alamos National Laboratory facility. A 5-eV atomic oxygen beam is produced using a continuous optical discharge technique, and the resulting pumped beam has sufficient high flux and velocity to simulate orbital conditions. The calibrated instrument will be used in the NASA Johnson Space Center Evaluation of Oxygen Interactions with Materials experiment to measure the density of ambient oxygen and to identify the products of oxygen-surface reactions.

Hunton, D. E.↗
NASA NTRS1985

STS-8 atomic oxygen effects experiment

A flight experiment was performed on the eighth Space Shuttle mission to measure reaction of surfaces with atomic oxygen in the low earth orbital environment. More than 300 individual samples were exposed to ram (normal to surface) conditions for 41.75 hr leading to a total atomic oxygen fluence of 3.5 x 10 to the 20th atoms/sq cm. Reaction rates for surface recession measured primarily by mass change of several organic films were in the range of 3.0 x 10 to the -24th cu cm/atom, and less than 5 x 10 to the -26th cu cm/atom for Teflon. Effects of parameters such as temperature and solar radiation were assessed, as was the importance of atmospheric ionic species on surface recession. In an experiment performed on the fifth Space Shuttle flight, no temperature dependence of reaction rate for the organic films studied was found in the temperature range of 25 to 125 C. Preliminary findings indicate that the reactivity of organic films is not affected by temperature (in the range of 65 to 125 C), solar radiation, or ionic species. Significant surface morphology changes led to a carpet-like appearance also consistent with previous findings.

Visentine, J. T.↗
NASA NTRS1985

A consideration of atomic oxygen interactions with space station

A computer model is developed in order to calculate fluence for a generalized spacecraft in orbital flight based on mass spectrometer and incoherent scatter (MSIS) measurements of ambient density. The calculations are used to identify criteria for the selection of materials for the construction of an LEO Space Station. The model is generalized such that the surfaces for study can be oriented in any direction with respect to: a body coordinate system fixed to the spacecraft (E surfaces); and a solar inertial coordinate system. A parametric study was performed in order to evaluate the effects of altitude, inclination, and solar activity on atomic oxygen fluence. Values are obtained for samples of Mylar, Kevlar, Kapton, Tedlar, Teflon and sulfone, as well as for some ethylene polymers. The range of values for material reactivities is from 360 microns for ram-facing surfaces to 200 microns for solar power surfaces during each cycle of solar activity. The possibility of improving reactivity by employing certain chemical coatings is also discussed.

Leger, L. J.↗
NASA NTRS1985

Material interactions with the low earth orbital environment Accurate reaction rate measurements

Interactions between spacecraft surfaces and atomic oxygen within the low earth orbital (LEO) environment have been observed and measured during Space Shuttle flights over the past 3 yr. The results of these experiments have demonstrated that interaction rates for many materials proposed for spacecraft applications are high and that protective coatings must be developed to enable long-lived operation of spacecraft structures in the LEO environment. A flight experiment discussed herein uses the Space Shuttle as an orbiting exposure laboratory to obtain accurate reaction rate measurements for materials typically used in spacecraft construction. An ion-neutral mass spectrometer, installed in the Orbiter cargo bay, will measure diurnal ambient oxygen densities while material samples are exposed at low altitude (222 km) to the orbital environment. From in situ atomic oxygen density information and postflight material recession measurements, accurate reaction rates can be derived to update the Space Station materials interaction data base. Additionally, gases evolved from a limited number of material surfaces subjected to direct oxygen impingement will be identified using the mass spectrometer. These measurements will aid in mechanistic definitions of chemical reactions which cause atom-surface interactions and in validating results of upcoming degradation studies conducted in ground-based neutral beam laboratories.

Visentine, J. T.↗
NASA NTRS1984

Low earth orbit atomic oxygen effects on surfaces

Significant effects have been observed on surfaces in the Shuttle Orbiter payload bay and on some experiments due to exposure to the LEO environment. These effects, which are predominantly manifested as surface recession and therefore mass loss, appear to arise from oxidation from exposure to atomic oxygen, the major LEO component. Rates of interaction were measured on two experiments for a large group of materials and specifically for thin organic films, and are in the range of 2-3 x 10 to the 24th cu cm/atom. These rates are large enough to present significant problems for solar arrays which use similar thin films for solar-cell support.

Leger, L. J.↗
NASA NTRS1982

The utilization of Shuttle launched vehicles for technical validation of advanced earth and planetary entry systems

Studies of future space missions have shown that transport vehicles which utilize passage (aeroassisted) through the atmosphere of the earth or an appropriate planet have a substantial payload advantage over earlier concepts which used retro propulsion to effect the transition to local orbit. A description is presented of aeroassisted concepts currently under consideration for application to NASA's advanced space entry missions. Proposed aeroassisted planetary orbit entry vehicles are considered, taking into account the aerobrake concept, the aerocapture concept, proposed aeroassisted earth orbit entry vehicles, the application of Shuttle launched research vehicles to aerobrake and aerocapture technology validation, Shuttle launched vehicle options, flight trajectory options, and trajectory termination options.

Jamison, C. C.↗
NASA NTRS1978

Shuttle mission plans

Shuttle mission plans recently developed by NASA for the time period 1980-1991 are presented. Standard and optional services, which will be available to users of the Space Transportation System (STS) when it becomes operational in the 1980's, are described. Pricing policies established by NASA to encourage use of the STS by commercial, foreign and other U.S. Government users are explained. The small Self-Contained Payload Program, which will make space flight opportunities available to private citizens and individual experimenters who wish to use the Space Shuttle for investigative research, is discussed.

Visentine, J. T.↗
NASA NTRS1976

Molecular outgassing measurements for an element of the Shuttle thermal protection system

Molecular outgassing studies were conducted on a thermal-protection material recently developed for the Shuttle Orbiter. Molecular outgassing rates as low as 10 to the minus 11th g/sq cm/sec, condensation coefficients, and molecular desorption rates were measured in four separate experiments using cryogenically and thermoelectrically cooled quartz crystal microbalances. Although the initial outgassing rates are high, they decreased to values in the 10 to the minus 10th g/sq cm/sec range in a reasonable period of time. Outgassing rates do not increase after entry heating although the condensation coefficients at various microbalance collection-surface temperatures become somewhat larger.

Visentine, J. T.↗
NASA NTRS1972

Preparation, verification, and operational control of a large space-environment-simulation chamber for contamination sensitive tests

A 2-year program to prepare chamber A at the NASA Manned Spacecraft Center for Apollo telescope mount thermal-vacuum tests is discussed. This program covers modification to existing chamber systems, the development of facility and chamber operating procedures, the selection of chamber cleaning and control methods, and the development and evaluation of diagnostic instrumentation. Extensive efforts to ensure a minimum contamination environment for the Apollo telescope mount test series are illustrated. Recent thermal-vacuum tests of this chamber at progressive stages of cleanliness have demonstrated the success achieved in reducing the particulate and molecular contamination levels of the basic chamber interior.

Visentine, J. T.↗