Engineering PapersSearch

Engineering topics

Vicroy, D. D.

Publications and source records attributed to Vicroy, D. D..

Algorithm for Fuel-Conservative Airplane Descents

Federal Aviation Administration implementing automated, time-based metering form of air-traffic control (ATC) with profile-descent procedures for arrivals into terminal area. Measures provide fuel savings by matching arrival of airplanes to airport acceptance rate through time-control computations and allowing pilot to descend at his discretion from cruise altitude to designated metering-fix altitude in idle-thrust clean configuration. Airborne descent algorithm developed compatible with time-based metering and profile-descent procedures and designed to improve accuracy of delivering airplane during fuel-efficient descent to metering fix at time designated by the ATC system.

Knox, C. E.

Design factors and considerations for a time-based flight management system

Recent NASA Langley Research Center research to develop a technology data base from which an advanced Flight Management System (FMS) design might evolve is reviewed. In particular, the generation of fixed range cruise/descent reference trajectories which meet predefined end conditions of altitude, speed, and time is addressed. Results on the design and theoretical basis of the trajectory generation algorithm are presented, followed by a brief discussion of a series of studies that are being conducted to determine the accuracy requirements of the aircraft and weather models resident in the trajectory generation algorithm. Finally, studies to investigate the interface requirements between the pilot and an advanced FMS are considered.

Vicroy, D. D.

Planning fuel-conservative descents in an airline environmental using a small programmable calculator: Algorithm development and flight test results

A simple, airborne, flight-management descent algorithm was developed and programmed into a small programmable calculator. The algorithm may be operated in either a time mode or speed mode. The time mode was designed to aid the pilot in planning and executing a fuel-conservative descent to arrive at a metering fix at a time designated by the air traffic control system. The speed model was designed for planning fuel-conservative descents when time is not a consideration. The descent path for both modes was calculated for a constant with considerations given for the descent Mach/airspeed schedule, gross weight, wind, wind gradient, and nonstandard temperature effects. Flight tests, using the algorithm on the programmable calculator, showed that the open-loop guidance could be useful to airline flight crews for planning and executing fuel-conservative descents.

Knox, C. E.

A preliminary study of the basic display/guidance requirements for flying near optimal trajectories

NASA has responded to the increased emphases on cost-efficient operation of today's airline fleet with an ongoing research program to investigate the requirements and benefits of using new airborne guidance and pilot procedures designed to yield cost-optimal flight profiles that are compatible with advanced air traffic control system concepts. A trajectory optimization algorithm has been incorporated into one of NASA Langley's fixed-based simulators to investigate the pilot/cockpit interface requirements. The trajectories that are generated by this algorithm differ from conventional profiles in that they are constantly varying in both flight path angle and airspeed. Considering the dynamic nature of these profiles, conventional guidance may be insufficient for practical use. This paper summarizes the results of an initial set of piloted simulation tests to investigate the basic guidance requirements for flying the near-optimal trajectories.

Vicroy, D. D.

User's manual for a fuel-conservative descent planning algorithm implemented on a small programmable calculator

A simplified flight management descent algorithm was developed and programmed on a small programmable calculator. It was designed to aid the pilot in planning and executing a fuel conservative descent to arrive at a metering fix at a time designated by the air traffic control system. The algorithm may also be used for planning fuel conservative descents when time is not a consideration. The descent path was calculated for a constant Mach/airspeed schedule from linear approximations of airplane performance with considerations given for gross weight, wind, and nonstandard temperature effects. An explanation and examples of how the algorithm is used, as well as a detailed flow chart and listing of the algorithm are contained.

Vicroy, D. D.

A comparison of two position estimate algorithms that use ILS localizer and DME information. Simulation and flight test results

Simulation and flight tests were conducted to compare the accuracy of two algorithms designed to compute a position estimate with an airborne navigation computer. Both algorithms used ILS localizer and DME radio signals to compute a position difference vector to be used as an input to the navigation computer position estimate filter. The results of these tests show that the position estimate accuracy and response to artificially induced errors are improved when the position estimate is computed by an algorithm that geometrically combines DME and ILS localizer information to form a single component of error rather than by an algorithm that produces two independent components of error, one from a DMD input and the other from the ILS localizer input.

Knox, C. E.

Description of the computations and pilot procedures for planning fuel-conservative descents with a small programmable calculator

A simplified flight management descent algorithm was developed and programmed on a small programmable calculator. It was designed to aid the pilot in planning and executing a fuel conservative descent to arrive at a metering fix at a time designated by the air traffic control system. The algorithm may also be used for planning fuel conservative descents when time is not a consideration. The descent path was calculated for a constant Mach/airspeed schedule from linear approximations of airplane performance with considerations given for gross weight, wind, and nonstandard temperature effects. The flight management descent algorithm and the vertical performance modeling required for the DC-10 airplane is described.

Vicroy, D. D.

The effect of landing system coverage and path geometry on lateral position errors at the runway threshold

The results of an analytical study performed to determine the effect of the azimuth coverage of a Microwave Landing System (MLS) on the ability of an airplane, with an initial navigation position estimate error, to navigate to the runway threshold are presented. The test path chosen for this study consists of an initial straight segment leading into a 130 deg turn with a 2286 m radius and ending in a straight-in final approach segment. The test path configuration was varied by changing the MLS azimuth coverage angle and the final approach length. The aircraft was positioned with an inital offset to the left or right of the desired path along the line of intersection with the MLS azimuth coverage. A fast time computer simulation program, using a simplistic point mass model of the airplane, was used for this study. The data from this study indicates that the lateral position errors at the runway are primarily a function of the final approach length. The effect of the azimuth coverage on the lateral position errors was restricted by the turn characteristics of the horizontal steering control laws.

Vicroy, D. D.