Engineering Papers⌕ Search

Engineering topics

Vessot, R. F. C.

Publications and source records attributed to Vessot, R. F. C..

At least 37 records · Page 2

Shuttle time and frequency transfer experiment

A proposed space shuttle experiment to demonstrate techniques for global high precision comparison of clocks and primary frequency standards is described. The experiment, using transmitted microwave and pulsed laser signals, compared a hydrogen maser clock onboard the space shuttle with a clock in a ground station in order to demonstrate time transfer with accuracies of 1 nsec or better and frequency comparison at the 10 to the -14th power accuracy level.

Allan, D. W.↗

Application of modern time series analysis to high stability oscillators

Techniques of modern time series analysis useful for investigating the characteristics of high-stability oscillators and identifying systematic perturbations are discussed with reference to an experiment in which the frequencies of superconducting cavity-stabilized oscillators and hydrogen masers were compared. The techniques examined include transformation to stationarity, autocorrelation and cross-correlation, superresolution, and transfer function determination.

Farrell, B. F.↗

Gravitational redshift space-probe experiment

A Scout D rocket was launched from Wallops Island, Virginia, carrying an atomic hydrogen maser oscillator system as the payload. The frequency of signals from the oscillator was monitored on the ground at Merritt Island, Florida, by using two hydrogen masers as comparison oscillators. The first-order Doppler shift in the signals was eliminated by a go-return transponder link to the payload, and the resulting data, representing the relativistic shifts, were recovered and recorded. The objective was to measure directly the effect of gravitational potential on the frequency of an atomic hydrogen maser assuming it to be a 'proper' clock. A gravitational effect amounting to some 4.5 parts in 10 to the 10th power was measured with an oscillator having a stability better than 1 part in 10 to the 14th power. Therefore, to make the best possible use of the oscillator, all frequency shifts at the 2 to 5 X 10 to the -15 power level in delta f/f in the system must be accounted for. This includes all the phase variations that can cause such a shift to appear. The experiment, the data available and the manner in which they were processed, and the results are described.

Vessot, R. F. C.↗

A timed-correlated four-link Doppler Tracking system

Phase perturbations that occur in the following components of the one and two-way systems are considered: (1) one-way system (signal from A to B): station a oscillator - transmitter A antenna A - signal path - antenna B - receiver B station B oscillator - recording system B; (2) two-way system (signal from A to B back to A): station A oscillator - transmitter A - antenna A - signal path up - antenna B - transponder B - antenna B - signal path down - receiver A - station A oscillator - recording system A. A symmetrical one- and two-way system which can identify the place of origin of the fluctuation and quantify it so as to recover the unperturbed phase at a given moment of time by time-correlating the phase fluctuations obtained in the one- and two-way data taken at both stations is described

Vessot, R. F. C.↗

Feasibility of a second-order gravitational red-shift experiment

The number of gravitation experiments undertaken since the advent of Einstein's theory of gravitation is quite small, with, so far, only the famous perihelion-advance experiment and a recent lunar-laser-ranging experiment being capable of measuring a nonlinear, second-order effect. It now appears that another distinct test of the second-order term may be feasible through the use of very stable atomic clocks. This experiment, which would measure the second-order gravitational red-shift, is a bona fide test of the field equations of gravity, not just a test of the underlying principle of equivalence. The nature of such an experiment, the basic equations, model-orbit calculations, and some tracking-accuracy requirements are presented. It is concluded that current space-probe tracking capabilities cannot determine all the necessary orbital parameters with sufficient accuracy for this experiment at the present time.

Jaffe, J.↗

Tunable cavity resonator with ramp shaped supports

A cavity for a hydrogen maser is described consisting of three parts which provide highly stable mechanical and thermal expansion characteristics for the cavity and ease of tuning. The three parts which are made of a glass ceramic material having a very small thermal expansion coefficient (1) a top plate, (2) a cylinder with three interrupted helical ramps at its bottom, and (3) a base which includes a bottom plate and three ramp lugs on which the helical ramps of the cylinder rest when the cylinder is placed on the base with the bottom plate in the cylinder. Cavity tuning is achieved by rotating the cylinder and thereby raising or lowering it on the base, which results in changing the cylinder volume by changing the distance between the bottom and top plates.

Vessot, R. F. C.↗

The second order gravitational redshift: Tracking analysis study

A first-phase, perturbation analysis is presented for the tracking requirements necessary for the measurement of the second-order redshift in a heliocentric probe experiment. The clock performance required for such an experiment is also investigated.

Jaffe, J.↗

A method of eliminating hydrogen maser wall shift

Maser output frequency shift was prevented by storage bulb kept at temperature at which wall shift is zero and effects of bulb size, shape, and surface texture are eliminated. Servo system is shown, along with bidirectional counter.

Levine, M. W.↗

Mechanically and thermally stable maser cavity resonator

New type cavity resonator is designed for hydrogen maser. Resonator consists of three pieces of glass-ceramic material having extremely low thermal coefficient of expansion and provides very stable mechanical tuning.

Vessot, R. F. C.↗

The significance of the redshift rocket probe experiment to the theories of gravitation

Direct measurements of the effects of gravitation on time are discussed. Using the earth's gravity these measurements can now be made to 20 parts per million. At present, there is a 1% verification of the equivalence principle for clocks made over a 75-ft vertical distance by use of Mossbauer gamma ray emission and absorption. Measurements made to greater accuracy and spanning distances where appreciable curvature of the metric of spacetime will help verify the equivalence principle, a postulate upon which Einstein developed his General Theory of Relativity.

Vessot, R. F. C.↗

Measurement of the gravitational redshift using a clock in an orbiting satellite

A hydrogen maser clock is proposed for enclosure in an orbiting satellite to measure the gravitational effect on time scales with high accuracy. This experiment is used to test the principle of equivalence for clocks in space. Extremely narrow linewidth of Fe-57 radiation and absorption due to Mossbauer effect over 75 ft vertical distance was used to confirm the prediction of the equivalence principle to 1 part in 100. The fractional frequency shift of a satellite-borne oscillator observed from earth is also given.

Vessot, R. F. C.↗

System automatically tunes hydrogen masers

Automatic tuning system permits frequency synchronization between two hydrogen masers. System matches spaceborne clock performance with that of ground-based clock to test red shift theory. This system, used in conjunction with radio astronomy for long-baseline interferometer experiments, serves as a tool for investigation of distant universe phenomena.

Levine, M. W.↗