Engineering Papers⌕ Search

Engineering topics

Velez, Carlos

Publications and source records attributed to Velez, Carlos.

5 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Simulation of Premixed and Partially Premixed Jet-in-Crossflow Flames at High Pressure

In this paper, we explore the operational map of a lean axial-staged combustor of premixed and partially premixed reacting jet-in-crossflow flames at high -pressure (5 atm). This study attempts to expand the data to relatively high pressure and could significantly aid scaling to real gas turbine engine conditions at 20–30 atm. High-speed camera, particle image velocimetry (PIV), CH* chemiluminescence, temperature, and pressure measurements were taken and processed to allow accurate reconstruction of six operating points relative to computational fluid dynamics (CFD) simulations under minimal adjustments. Variation of lean main stage (φ = 0.575 and 0.73) and rich jet (φ = 1.1, 4, and 8) equivalence ratio has been investigated for a four mm axial jet. The fully premixed flames were found to be controlled by the crossflow temperature before ignition and the crossflow oxygen content during combustion. Analysis of flame shape and position for the partially premixed operating points describes a lee stabilized as well as a more unsteady windward flame branch. Adjustment of added jet fuel and crossflow temperature along with its corresponding oxygen level is required to attain a compact flame body. Here, the risk of delaying combustion progress is significantly increased at a richer jet φ = 8 and an overshooting, spatially divided flame was attained with a main stage φ = 0.73. Control toward a compact flame body is critical to allow combustion at reasonable reaction rate.

03 NATURAL GAS↗
DOE OSTI2020

Influence of Equation-of-States on Supercritical CO2 Combustion Mixtures

Abstract Fossil fuel based direct-fired supercritical CO2 (sCO2) cycles are gaining the attention of industry, academia, and government due to their remarkable efficiency and carbon capture at high-source temperatures. Modeling plays an important role in the development of sCO2 combustors because experiments are very expensive at the designed operating conditions of these direct-fired cycles. Inaccurate density estimates are detrimental to the simulation output. Hence, this work focuses on comprehensive evaluation of the influence and applicability of various equation-of-states (EOS) which are being used in the supercritical combustion modeling literature. A state-of-the-art supercritical combustion modeling methodology is used to simulate counter-flow supercritical CO2 flames by using various equation-of-states. The results show that using the corresponding state principle to evaluate compressibility factor is not accurate. Also, van der Waal type EOSs predictions can be as accurate as complex Benedict–Webb–Rubin EOSs; hence van der Waal EOSs are more suitable to simulate sCO2 combustor simulations. Non-ideal effects are significant under the operating conditions considered in this work. The choice of EOS significantly influences the flame structure and heat release rate. Also, assuming the binary interaction parameter as zero is reasonable in sCO2 combustion simulations.

Energy & Fuels↗
DOE OSTI2019

A General Study of Counterflow Diffusion Flames for Supercritical CO2 Combustion

Abstract A counterflow diffusion flame for supercritical CO2 combustion is investigated at various CO2 dilution levels and pressures by accounting for real gas effects into both thermal and transport properties. The UCF 1.1 24-species mechanism is used to account the chemistry. The nature of important nonpremixed combustion characteristics such as Prandtl number, thermal diffusivity, Lewis number, stoichiometric scalar dissipation rate, flame thickness, and Damköhler number are investigated with respect to CO2 dilution and pressure. The results show that the aforementioned parameters are influenced by both dilution and pressure; the dilution effect is more dominant. Further, the result shows that Prandtl number increases with CO2 dilution and at 90% CO2 dilution, the difference between the Prandtl number of the inlet jets and the flame is minimal. Also, the common assumption of unity Lewis number in the theory and modeling of nonpremixed combustion does not hold reasonable for sCO2 applications due to large difference of Lewis number across the flame and the Lewis number on the flame drop significantly with an increase in the CO2 dilution. An interesting relation between Lewis number and CO2 dilution is observed. The Lewis number of species drops by 15% when increasing the CO2 dilution by 30%. Increasing the CO2 dilution increases both the flow and chemical timescales; however, chemical timescale increases faster than the flow timescales. The magnitudes of the Damköhler number signify the need to consider finite rate chemistry for sCO2 applications. Further, the Damköhler numbers at 90% sCO2 dilution are very small; hence, laminar flamelet assumptions in turbulent combustion simulations are not physically correct for this application. Also, it is observed that the Damköhler number drops nonlinearly with increasing CO2 dilution in the oxidizer stream. This is a very important observation for the operation of sCO2 combustors. Further, the flame thickness is found to increase with CO2 dilution and reduce with pressure.

Engineering↗
DOE OSTI2019

COMBUSTION AND EMISSION CHARACTERISTICS OF A LEAN AXIAL-STAGE COMBUSTOR

Gas turbine engines with high operational flexibility represent an important area of research. In support of this, the reduction of NOx emissions at high-temperature, full-load conditions are the main target of this research study. To overcome the challenge of decreasing the residence time of hot exhaust gas in the burner, the approach of axial-staged combustion has been used, which aims to burn at lean conditions. A main combustion stage with a conventional burner is followed by a jet-in-crossflow (JIC) stage downstream. This second combustion stage, the test section, burns well over a third of the total fuel amount, which is added by a jet inlet. A steady Computational Fluid Dynamics (CFD) model in Star-CCM+ was created to analyze the JIC stage. A structured mesh grid with 1.7 million cells and local refinement domains was used along with RANS equations, Realizable k-ε turbulence, Complex Chemistry model with Laminar Flame Concept (LFC) applied. The findings of the computational model include a detailed description of the flow field, focusing on vortex formation and penetration depth. Three vortex types and local pressure losses of up to 6% in the mixing domain were identified. Results were compared with similar data from literature and a very good match was yielded. Optical laser diagnostics should work well to capture the predicted flow penetration. The highest local reaction rates were observed inside a thin flame front, 4 to 6 diameters downstream of the jet. The jet showed a limited expansion into the available channel domain, resulting in low heat release and a methane conversion of only 52%. Providing an enhanced amount of oxygen was proven to increase the CH4 conversion significantly. Emissions were analyzed for an estimated species composition from the main burner. A CO production of 9.85‰ and the reduction of an incoming NOx amount by 15% were determined, outlining the potential of axial-staged combustion. Further numerical investigation along with experimental verification is in progress.

03 NATURAL GAS↗