Engineering topics

Van Hoven, G.

Publications and source records attributed to Van Hoven, G..

At least 19 records

NASA NTRS1993

The differential emission measure of nested hot and cool magnetic loops

The detailed thermal structure of the magnetized solar transition region, as measured by its differential emission measure (DEM(T)), is poorly known. Building on the fact that the solar surface is strongly magnetized and thereby structured, proposals have been made that envision a significant lower-temperature contribution to the energy balance from (ion) heat flux across an arcade of different temperature loops. In this paper, we describe a self-consistent 2D MHD simulation, which includes the full thermal effects of parallel stability and anisotropic conduction, of a nested-loop model of the thermal and magnetic structure of the transition region. We then demonstrate that the predicted DEM agrees with observations in the conceptually elusive T less than 10 exp 5 K regime.

Van Hoven, G.↗

NASA NTRS1993

Formation, levitation, and stability of prominences in the magnetized solar atmosphere

The dynamic formation of prominences in the initial magnetothermal equilibrium and their stability to sideward displacements are investigated focusing on the structure of the 2D solar atmosphere in the presence of coronal arcades or loops. A model based on 2D magnetohydrodynamic equations takes into account gravity, compressible flows, heating, radiation, anisotropic thermal conduction, and coupling to a deep chromosphere. It is found that prominences in simple arcades characterized by magnetic field with significant curvature at the apex are unstable to a lateral displacement.

Drake, J. F.↗

NASA NTRS1993

The thermal structure of the magnetized solar transition region

The detailed thermal structure of the magnetized solar transition region, as measured by its differential emission measure DEM(T), is unknown. Proposals have been made that envision a significant lower-temperature contribution to the energy balance from cross-field (ion) heat flux. In this paper, we describe a self-consistent 2D MHD simulation (including the full effects of anisotropic thermal conduction) of a conceptual model due to Athay (1990). We display the detailed irregular thermal and magnetic structure of the transition region and demonstrate that the predicted DEM agrees with observations, particularly in the T less than 10 exp 5 K regime where previous theories had difficulty.

Mok, Y.↗

NASA NTRS1992

Prominence condensation and magnetic levitation in a coronal loop

The results of a model dynamic simulation of the formation and support of a narrow prominence at the apex of a coronal magnetic loop or arcade are described. The condensation process proceeds via an initial radiative cooling and pressure drop, and a secondary siphon flow from the dense chromospheric ends. The antibuoyancy effect as the prominence forms causes a bending of the confining magnetic field, which propagates toward the semirigid ends of the magnetic loop. Thus, a wide magnetic 'hammock' or well (of the normal-polarity Kippenhahn-Schlueter-type) is formed, which supports the prominence at or near the field apex. The simplicity of this 1.5-dimensional model, with its accompanying diagnostics, elucidates the various contributions to the nonlinear dynamics of prominence condensation and levitation.

Van Hoven, G.↗

NASA NTRS1991

The thermal stability of coronal loops - Numerical simulations

The radiative stability of thermally isolated coronal loops with free-flow boundary conditions by nonlinear numerical simulation are studied. A chromosphere-to-corona loop equilibrium (including the option of a deep chromosphere) is first established by following the nonlinear evolution from an initial isothermal state with rigid boundaries. The end conditions are then changed, to allow free flow and to fix the temperature, and investigate the response to nonisobaric perturbations. Within a family of loops of the same pressure, long hot loops to be stable and short cool loops to be unstable to the thermal chromospheric-expansion mode are found. The stable cases remain so, even when long chromospheric ends and/or gravity are added. In those cases which are unstable, the subsequent nonlinear evolution which exhibits swelling of the chromosphere until the entire loop becomes cool and dense are followed.

Mok, Y.↗

NASA NTRS1990

Prominence formation in a coronal loop

A model is presented which depends on the preferential deposition of heating in the legs of a coronal loop and which produces a stable prominence-scale condensation at the loop top. Dynamic stability is attained by the subsequent adjustment of local parallel gravity by a magnetic inversion at the loop (or arcade) apex. A nonlinear numerical simulation of this process, which includes a deep chromosphere, a heating rate with a fixed dissipation length, and full solar gravity is described.

Mok, Y.↗

NASA NTRS1990

The nonlinear evolution of magnetized solar filaments

Thermal instability driven by optically thin radiation is believed to initiate the formation of plasma filaments in the solar corona. The fact that filaments are observed generally to separate regions of opposite, line-of-sight, magnetic polarity in the underlying photosphere suggests that filament formation requires the presence of a highly sheared, local magnetic field. Two-dimensional, nonlinear, magnetohydrodynamic simulations of the local genesis and growth of solar filaments in a force-free, sheared, magnetic field were performed, and the evolution of generic perturbations possessing broad spatial profiles was traced. It was found that simulations of the evolution of initial random-noise perturbations produce filamentary plasma structures that exhibit densities and temperatures characteristic of observed solar filaments. Furthermore, in each of these simulations, the filament axis lies at a finite angle with respect to the local magnetic field, consistent with solar observations.

Sparks, L.↗

NASA NTRS1990

MHD simulations of coronal mass ejections - Importance of the driving mechanism

The importance of the form of the driving mechanism in MHD simulations of coronal mass ejections is investigated. A model simulation problem is devised, and it is found that the use of a simple form for the initial corona, with an upward moving parcel of cold, dense plasma as the driving mechanism, can produce results that are consistent with many of the features observed by coronagraphs. The results imply that the nature of the driving mechanism may play an important role in determining the dynamical evolution of mass ejections.

Linker, J. A.↗

NASA NTRS1990

Effects of the driving mechanism in MHD simulations of coronal mass ejections

Results of time-dependent MHD simulations of mass ejections in the solar coronal are presented. Previous authors have shown that results from simulations using a thermal driving mechanism are consistent with the observations only if an elaborate model of the initial corona is used. The first simulation effort, using a simple model of a plasmoid as the driving mechanism and a simple model of the initial corona, produces results that are also consistent with many observational features, suggesting that the nature of the driving mechanism plays an important role in determining the subsequent evolution of mass ejections. First simulations are based on the assumption that mass ejections are driven by magnetic forces.

Linker, J. A.↗

NASA NTRS1989

Turbulent excitation of spontaneous reconnection

The long-term nonlinear evolution of a tearing-mode-unstable sheared-field plasma in a turbulent environment is explored. Two different physical configurations are modeled, and a different computational system is used for each. Results of both sets of calculations show that magnetic tearing arises spontaneously provided that the initial turbulence energy level is below the natural saturation level of the tearing instability. The relationship between these results and those of previous calculations are briefly discussed, concluding that there are no significant unexplainable disagreements.

Deeds, D.↗

NASA NTRS1989

Creation of current filaments in the solar corona

It has been suggested that the solar corona is heated by the dissipation of electric currents. The low value of the resistivity requires the magnetic field to have structure at very small length scales if this mechanism is to work. In this paper it is demonstrated that the coronal magnetic field acquires small-scale structure through the braiding produced by smooth, randomly phased, photospheric flows. The current density develops a filamentary structure and grows exponentially in time. Nonlinear processes in the ideal magnetohydrodynamic equations produce a cascade effect, in which the structure introduced by the flow at large length scales is transferred to smaller scales. If this process continues down to the resistive dissipation length scale, it would provide an effective mechanism for coronal heating.

Mikic, Z.↗

NASA NTRS1988

Spectral analysis of turbulent effects on resistivity and the tearing instability

A spectral numerical-simulation code and ancillary diagnostics are used here to analyze the behavior of resistive magnetic tearing in the presence of short-wavelength turbulence. It is found that, in general, the anomalous resistivity defined by Biskamp and Welter (1983) due to short-wavelength turbulence tends to return quickly towards zero even when artificially supported away from zero, and that its effect on tearing-mode behavior is not consistent with its interpretation as a resistivity. The behavior reported by Biskamp and Welter and the behavior observed here are analyzed. It is argued that, while not meaningful as a true resistivity, the anomalous resistivity parameter is a useful diagnostic showing the energy balance of the system.

Deeds, D.↗

NASA NTRS1988

Thermal instability of a radiative and resistive coronal plasma

Thermal instability is believed to determine the evolution and formation of cool structures in the solar atmosphere such as the transition region and prominences (or filaments). The linear modes that arise in a sheared, force-free, magnetic field due to thermal instability are studied numerically. Previous studies have considered separately modes that arise due to the effects of radiation, compression, anisotropic thermal conduction, and ohmic heating. Here the results of such studies are integrated, first by presenting simple arguments that illustrate the essential physics of ideal, sheared-field, condensation modes, and second by showing numerically how finite resistivity affects the condensational instability in parameter regimes applicable to the solar corona.

Sparks, L.↗

NASA NTRS1988

Radiative instabilities in sheared magnetic field

The structure and growth rate of the radiative instability in a sheared magnetic field B have been calculated analytically using the Braginskii fluid equations. In a shear layer, temperature and density perturbations are linked by the propagation of sound waves parallel to the local magnetic field. As a consequence, density clumping or condensation plays an important role in driving the instability. Parallel thermal conduction localizes the mode to a narrow layer where K(parallel) is small and stabilizes short wavelengths k larger-than(c) where k(c) depends on the local radiation and conduction rates. Thermal coupling to ions also limits the width of the unstable spectrum. It is shown that a broad spectrum of modes is typically unstable in tokamak edge plasmas and it is argued that this instability is sufficiently robust to drive the large-amplitude density fluctuations often measured there.

Drake, J. F.↗

NASA NTRS1987

Resistive-heating instability of a compressible, force-free plasma

The thermal stability of a resistive, force-free plasma in a two-dimensional, slab geometry is investigated numerically. Linearly unstable modes that arise as an energetic consequence of Ohmic heating are examined in relation to the dynamic magnetic-tearing instability. Plasma compression is found to give rise to a set of unstable thermal modes not seen in previous incompressible studies. Such modes can occur in parameter regimes where no purely growing tearing mode exists.

Sparks, L.↗

NASA NTRS1987

Nonlinear radiative condensation in a sheared magnetic field

A well-resolved two-dimensional nonlinear numerical simulation of the radiative/thermal instability in a sheared magnetic field is described which leads to filament formation. The condensation is initiated by a linearly unstable mode and widens until it is slowed by thermal conduction parallel to B. During the nonlinear evolution, the minimum temperature falls from 10 to the 6th K to 10 to the 4th K and eventually reaches a state of local thermal equilibrium in about five e-folding times.

Van Hoven, G.↗

NASA NTRS1986

Ideal condensations due to perpendicular thermal conduction in a sheared magnetic field

Cool condensations generated by a radiative thermal instability in a sheared magnetic field have previously been the bases of solar filament formation models. Through the assumption of fully anisotropic heat flow, a new set of condensation modes are here obtained which become singular in the limit of vanishing perpendicular thermal conductivity. The growth rates are noted to typically be greater than those reported previously for sheared field condensations. The fastest growth is exhibited by modes possessing the fewest oscillations.

Van Hoven, G.↗

NASA NTRS1986

Solar flare precursors

Recent progress in the study of flare precursors and onset is reviewed. New theoretical results on filament formation and erution are presented, including especially the dynamical effects of magnetic fields. Ample evidence is found that energetic processes are already at work in the onset phase, a few minutes before the rapid rise of the hard-radiation impulse. In particular, the prevalence of soft and hard X-ray preheating (to less than 100 million K) is detailed, along with a connection to the launch of coronal mass ejections. A possible interpretation of the empirical time profiles near onset is that 'preheating' signifies that the flare has slowly started, and the transition to the impulsive stage then represents a change of phase in the flare-instability process. Finally, the problem of the interpretation of microwave preflare data is delineated.

Van Hoven, G.↗